Chipper Shredder Engine

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

This part is a crankcase cover. The crankcase itself is what shields the crankshaft from any dirt or debris that would damage the engine. The crankcase is a pressurization chamber for the fuel-air mixture. This part is a cover for the crankcase. It's important that this shield is intact because any dirt or debris that gets into the engine can cause the engine to fail.A new crankcase cover may be needed if the crankcase cover is dented, broken, or damaged in any way. A visual inspection is sufficient. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It is sold individually. This crankcase cover is compatible with engines, lawnmowers, tillers, log splitters, chippers, shredders, and trimmers manufactured by MTD, Yard Machines, Cub Cadet, Husky, Yard-Man, and Troy-Bilt.

This cylinder head is made for use in many types of lawn and garden equipment. The cylinder head is located on top of the engine in the machinery. It is tasked with making sure the combustion chamber is sealed shut. The gap between the engine and the cylinder head will be filled using a head gasket. Another responsibility of the cylinder head is ensuring the cylinder is constantly lubricated. If the cylinder head isn't working, it may cause low oil levels, lowered engine performance, and exhaust smoke.To inspect the cylinder head, the grass shield and screen should first be removed. Remove the engine cover by taking out all of the bolts that secure it. Remove the engine shroud and the bolts that connect the head to the pump bracket. The cylinder head will be located under the valve cover. Remove it and install the replacement part before using the tool.This cylinder head is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. The cylinder head is created to be compatible with lawnmowers, string trimmers, edgers, log splitters, and wood chippers manufactured by MTD, Cub Cadet, and Craftsman.

This is a quality replacement flywheel used in lawn and garden tools like tillers and wood chippers. The flywheel is a substantial metal wheel that is attached to the rotated shaft. The part regulates how much power is moved from the motor to the other parts of the equipment. The inertia and weight of the flywheel moderates and opposes small changes to the speed of the engine. The flywheel holds that energy in reserve until it is most needed by the machine.Over time with ordinary use, the flywheel may become cracked. One way to tell if the part is damaged is if gear slippage occurs. The location of the part and replacement process will depend upon the machine in which it is used. It should require only a screwdriver to place the new replacement component.This flywheel is compatible with tillers, log splitters, and wood chippers manufactured by MTD and Cub Cadet. It is sold as an individual part. The flywheel is a genuine OEM replacement part sourced directly from the manufacturer.

This authentic OEM replacement push rod connects to the camshaft on small or medium sized gas-powered lawn tractor engines, and as the camshaft turns, the push rod transfers that motion into the valves. Without a functioning push rod, the valves will not open and the engine will not work. Push rods also act as transferring units that bring oil through the valves and into the camshaft. If these parts start to stick due to poor lubrication, push rods can bend and will no longer work properly. It is also possible, though rare, for a push rod to bend due to general metal fatigue over time. To identify a bent push rod, listen for a ticking sound in the engine and look out for any slipping gears. Accessing the push rods will mean taking apart the camshaft and valves and may require the user's manual. This replacement part is sourced from its original manufacturer and is compatible with Craftsman and Briggs & Stratton lawn tractors. It ships individually.

This is a breather designed to be used on various types of lawn and garden equipment. The breather is an essential part that is responsible for venting out excess air from the engine's crankcase. If the equipment's engine isn't working as well as it used to, it could be related to a broken or damaged breather. In this situation, the breather will need to be replaced.Replacing the breather will require a socket set, a nut driver, a Phillips head screwdriver, and a set of pliers. Inspecting the breather or making a replacement starts with removing the equipment's muffler. This will give access to the original breather for visual inspection. If it has damage, it should be removed. The new part can be replaced before reassembling the tool.This breather is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The breather is designed to fit onto lawnmowers, snowblowers, tillers, generators, and wood chippers manufactured by Briggs & Stratton, Craftsman, Toro, Cub Cadet, Tecumseh, Lawn-Boy, MTD, and Simplicity.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.