Chipper Shredder Starter

The recoil starter assembly is a replacement for the starter on lawn equipment. It has been sourced from the original equipment manufacturer to ensure a proper fit. The assembly allows users to start up their equipment by pulling on the starter rope. This causes the cogs to engage with the drive cup on the flywheel, so the engine can start. Over time, this assembly can start to have some wear and tear issues and might need replacement. It might have cracks or pieces broken off, including on the interior of the assembly. This could make it more difficult, or even impossible, to get the engine to start. Replacing the entire assembly could be the needed fix. The genuine OEM part is a complete assembly that includes the plastic shroud, the recoil spring, starter pulley, pull rope, and handgrip. The part can be used with lawn mowers, pressure washers, wood chippers, and other small engines. It is compatible with Tecumseh, Toro, Lawn-Boy, Cub Cadet, Craftsman, and Briggs & Stratton.

This is a replacement starter solenoid kit for use on multiple lawn tractor models manufactured by Craftsman. The starter solenoid is essentially an amplifier. When the key is turned in the mower, the current is sent from the battery through the solenoid, which closes a switch, amplifying the current to what is necessary to crank the engine. Solenoids are electromechanical devices and are subject to both electrical component failure and physical wear and tear. Eventually, starter solenoids will wear out through normal use. However, they may also fail due to electrical shorts and related problems. If the engine does not crank even with a fully-charged battery, the solenoid could be the culprit. To replace the solenoid, open the hood of the lawn tractor and locate the old solenoid. Disconnect the battery cables, then disconnect the cables connected to the solenoid. Remove the mounting bolts and pull out the starter solenoid. Install the new solenoid and new wiring in the kit, and reconnect the battery. This is a genuine OEM replacement and is sold individually. It is designed to work with multiple Craftsman zero-turn riding mowers.

This is a genuine engine recoil starter cup that is designed for use in several different styles of outdoor lawn and garden equipment engines. This engine recoil starter cup is part of the starter recoil assembly and is used to attach various parts to the engine. The starter cup's primary role is to engage the flywheel when the starter rope is pulled. Although it is made of durable metal, this part can become warped or otherwise damaged over time and with constant exposure to high temperatures. If the part fails to work, the engine may not be able to engage until it is replaced. This engine recoil starter cup is manufactured by Tecumseh and is an OEM replacement part. It works with several models of outdoor power equipment engines, including those in machines from Craftsman, Sears, Lawn Boy, MTD, Troy-Bilt, and Tecumseh. The part is sold individually and does not include hardware. Allow the engine to cool completely and wear gloves for hand protection whenever performing engine repairs. If additional parts of the starter recoil assembly need to be replaced, those will require an additional purchase.

This is a starter dog that is located right next to the retainer in many types of lawn and garden equipment. It is made of durable metal. This part is responsible for engaging the recoil starting system on the engine. Sometimes the starter dog can become damaged or worn, which will result in an engine that has trouble starting. In this situation, the starter dog will need to be replaced to ensure the lawn equipment works as expected.If the starter dog needs to be replaced, a pair of pliers will be needed for the process. Place the tool on a level surface and disconnect the spark plug wire. The blade assembly and clutch assembly will need to be removed to get access to the starter dog. Take this part out of the tool and replace it with a quality new component. Reassembly the other parts before use.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is made to be compatible with lawnmowers, snowblowers, tillers, edgers, and generators manufactured by Tecumseh, Briggs & Stratton, Toro, Cub Cadet, and Craftsman. The starter dog is sold as an individual part.

The recoil starter assembly includes the housing, starter pull rope, and starter grip. It attaches to the flywheel in lawn equipment engines so that when the starter rope is pulled, the recoil spring is retracted and causes the flywheel to rotate, allowing the engine to fire up. Constant starting will eventually result in the starter rope becoming loose or the entire recoil becoming seized up. If the starter rope won’t retract or if the starter is frozen and won’t engage, a replacement is needed. To install the recoil starter assembly, remove the screws that hold the housing in place, take off the old recoil and replace it with the new one. Then, replace the screws and get back to work. Always use gloves when working on equipment engines and make sure to disconnect the spark plug before beginning repairs. This recoil starter assembly is compatible with various engines from MTD and Tecumseh, including more than 150 horizontal 4-cycle engines. It may be used on tillers, generators, log splitters, or other small engines sold by Briggs & Stratton, Cub Cadet, and Tecumseh. Sold individually.