Columbia Parts

This is a chute flange keeper that is commonly used on snowblowers. It is black and made of durable plastic. The purpose of the chute flange keeper is to ensure the chute can properly rotate along with the chute adapter. The chute flange keeper is connected to the flange on the chute. There are typically three chute flange keepers on a snowblower.If a chute flange keeper is damaged, broken, or missing, it will need to be replaced. A screwdriver and work gloves will be needed to handle the job. A screwdriver can be inserted into the equipment to pry off the old chute flange keeper. Put the new flange keeper in place and force it into position using vice grips. Users can also snap in one end and use a pair of pliers to get the other side to fit. Reassemble all parts before using the tool again.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The chute flange keeper is designed for use with snowblowers manufactured by Yard-Man, Huskee, MTD, Yard Machines, Troy-Bilt, Cub Cadet, and Craftsman.

This genuine MTD speed selector cable attaches the speed control lever to the snowblower's ground drive system to regulate and maintain the speed of the snowblower.Though speed selector cables are highly durable, they can be subject to damage as a result of exposure to inclement weather, impact upon collision, and general decline. Signs of a damaged speed selector cable can include malfunctioning regulation of speed, an overheating engine, or black smoke rising from the engine. If any of these symptoms occur, the speed selector cable should be checked and replaced immediately, as the snowblower cannot function properly without it. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This speed selector cable is compatible with the following brands: MTD, Troy-Bilt, Cub Cadet, Yard Machines, and Craftsman. Part sold individually.

The snowblower auger paddle is designed for use with various single-stage 21 MTD snow throwers and blowers. This part may also be referred to as the spiral crescent. This paddle is attached to the auger, which rotates when the engine is started. As the auger rotates, the paddle will pick up and throw the snow out of the way. This part may get damaged by debris or some type of accident, or it can wear down over time. Replace a broken or worn out snowblower paddle with a genuine OEM replacement paddle. This is an OEM replacement part from MTD that fits various models of snowblowers. It can be used with compatible models from Yard Machines, Yard-Man, Troy-Bilt, Husky, Ryobi, Bolens, and MTD machines. There are over 150 models in total that this paddle can work with. It is made out of durable rubber and comes sold individually. There are two screws at each end required for mounting, which are sold separately.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This component is a bail used with many types of snowblowers. This part is a safety feature, ensuring the snowblower turns on and off. If the bail becomes damaged or broken, it will need to be replaced to ensure the snowblower is safe to operate.If the bail is broken, bent, or otherwise damaged, the part will need to be replaced. A pair of pliers will be useful for this task. Be sure to wear work gloves, as well. Take the bail out of the handle holes. The new replacement part will fit into the handle spaces so the snowblower can be used again. This bail is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The bail is made to fit a variety of snowblowers manufactured by Craftsman, Bolens, Ryobi, Yard Machines, Huskee, and Yard-Man.

This is a height adjustment plate that is used on lawnmowers by a variety of manufacturers. It is made of durable metal and is an integral part of the mower. It ensures the mower wheels can be raised or lowered to create the desired cutting height for the blades. Over time, the height adjustment plate on a lawnmower can wear out or become damaged and will need to be replaced.When the height adjustment plate needs to be replaced, a pair of pliers and a wrench will be required. Place the lawnmower on a stable surface and disconnect the spark plug wire. Take out the bolts on the front end before removing the plate. There will be additional bolts to remove to take off the height adjustment place. The front axle can be pried out of the clips using a screwdriver. Fasten on the new adjustment plate and reassemble the other components.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The height adjustment plate is compatible with lawnmowers manufactured by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, and Craftsman.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This is a replacement fuel bowl gasket that is specifically made for select models of snowblowers. The fuel bowl gasket is used to create a seal in the fuel bowl, allowing the carburetor to maintain appropriate pressure and deliver the fuel properly throughout the engine. Over time, gaskets like this one will become compressed and deteriorated, creating a leak in their seal. This can lead to fuel or air leakage, poor engine performance, and more serious damage if left unrepaired. Replacing gaskets is typically considered routine maintenance, and it is essential to replace them as quickly as possible. This genuine fuel bowl gasket is manufactured to OEM specifications by MTD and designed for use in select machines from MTD, as well as those from Cub Cadet, HUSKEE, Lawn Chief, RYOBI, Troy-Bilt, Craftsman, Remington, Yard Machines, Yard Man, and Bolens. There are hundreds of machines that can use this fuel bowl gasket. It is made of durable rubber material and sold as a single unit. Always be sure to inspect gaskets when performing other maintenance and repairs and use the correct tools for gasket replacement to prevent damage during installation.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Here is a replacement fuel tank for use with a range of different models of small engines. The fuel tank plays one of the most important roles in a machine with an internal combustion engine. The tank holds the gas, which flows through the fuel line, so the machine can operate. Although fuel tanks are durable and built to last, there could be any number of reasons that one may need to be replaced. On older machines, for example, the fuel tank could have become damaged or corroded. Even newer machines could have a faulty fuel tank that would need to have a replacement. If there is an issue with the tank, it is not a replacement that can wait. The tank could be leaking fuel, for example, which can be wasteful as well as dangerous. This genuine OEM replacement fuel tank is identical to the one that came with the machine. It is sold individually and does not include any of the hardware needed for replacement. It can work with dozens of models of tillers, log splitters, and other small engines. Compatible brands include Troy-Bilt, Cub Cadet, MTD, HUSKEE, MasterCut, and Yard Machines.

This muffler is a genuine MTD part, sold individually. This muffler can be used as a replacement part for a lawn tractor. The purpose of a muffler for a lawn tractor is to quiet down the noise that comes out of the exhaust while the appliance is in operation; the muffler also prevents stray sparks from firing into grass and leaves.The muffler might have to be replaced if it exhibits clear signs of damage. If the exhaust is unusually loud or if external materials are being ignited by the lawn tractor while in operation, it is likely that the muffler is broken or malfunctioning. If this is the case and the muffler cannot be repaired, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is a transmission belt. This is a genuine replacement part made by MTD. This transmission belt is used in many different types of machinery and is responsible for helping keep parts moving within the transmission of the machine.A new transmission belt might be needed if the current one is missing or damaged in any way. If there are unusual noises coming from the engine, it can be due to a faulty transmission belt. Other damage can include being torn or stripped down due to years of normal wear and tear. Be sure to wear work gloves during this repair as this part is often close to other pieces that can cause injury.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

These quality tiller tines are used on a variety of yard tillers. Tiller tines are blades attached to the tiller that turn soil and prep it for cultivating a garden. As the tiller tines are used, they can become worn down, broken, or damaged through use or impact with rocks and other debris. These are C-shaped tines that can cut through dense soil.If the tiller tines are bent, dull, or damaged, they will need to be replaced, otherwise they might till the soil unevenly and may not reach the depth required. To replace the tines, remove the spark plug wire before taking off the tine shield end cover. Taking out the tines requires removing the cotter pin from the clevis pin so the clevis pin can be pulled out. Next, the tines can be pulled directly off of the shaft. Slide on the new tines and reinstall the clevis and cotter pins before using the tiller again.These tiller tines are an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The tines are compatible with tillers manufactured by MasterCut, Craftsman, Yard-Man, Cub Cadet, Bolens, Yard Machines, MTD, Huskee, and Montgomery Wards.