Columbia Parts

Fuel cap for gas-powered engines and outdoor power equipment. Seals fuel tank to prevent debris, dirt, and air contamination. Replace if cracked or loose.

Carburetor assembly for snow throwers. Mounts to the engine block to mix air and fuel. Replace if cracked, leaking, or worn to restore proper operation.

Carburetor assembly for snow throwers and gas snowblowers. Installs on the engine to mix air and fuel. Replace if cracked, leaking, or corroded.

This silencer plate is used on a variety of outdoor lawn and garden machines to reduce the noise from the air intake. This molded plastic part sits on top of the carburetor and houses the air filter. It provides an added layer of noise muffling. Exposure to wind, rain, and heat can cause the plastic to become brittle and cracked. The silence plate should be replaced if damage is discovered during routine maintenance. A screwdriver is needed to replace the silence plate. Before working on the machine, make sure the engine is cool and remove the spark plug. Remove the air filter cover and the air filter to access the silencer plate. Remove the screws holding the plate in place. Install the new silencer plate. Tighten the screws. Install the air filter and housing cover. This silencer plate is made of durable molded plastic and is sold individually. It is a genuine OEM replacement part sourced directly from the manufacturer. This part is compatible with tillers, chippers, shredders, and small engines manufactured by Cub Cadet, MTD, and Yard Machines.

Plastic cover that snaps over the air filter assembly on lawn and garden engines. Replace if cracked, broken, or missing to protect the filter from dirt.

The drive V-belt, manufactured by Craftsman, is used in one- and two-stage snow blowers as well as tillers. This is a drive belt that connects the engine to the auger of the tiller or snowblower via a pulley at either end. This turns the blades of the tiller or the auger blades of the blower to expel snow. As a flexible, hardened rubber part connecting other moving parts, a V-belt is considered “replaceable,” meaning that users should expect to have to replace this part during normal use of the equipment. Signs that a drive V-belt may be going bad are a squealing sound when the blower's auger or the tiller's blades are first engaged, or if the auger is slow to engage and loses power during use. To replace the V-belt, the equipment must be secured and the spark plug caps removed. Tilt the device to reveal the location of the belt. It must detached from the engine pulley and the transmission pulley. When replacing the V-belt, before tightening the pulley, make sure all moving parts are properly aligned. This genuine OEM part is compatible with machines sold by MTD, Yard Man, Craftsman, and Yard Machine.

This V-belt rotates the auger and impeller on your snow blower. Replace when worn, cracked, or slipping to restore throwing performance. Verify fit.

Drive belt for lawn tractors. Replace when you notice slipping, cracking, or reduced performance. Verify compatibility with your model number.

Transmission drive belt for riding mowers and tractors. Replace if slipping, worn, or cracked to restore power transfer. Verify fit with your model number.

Drive belt for lawn tractors, transfers power to operate mower components. Replace when worn, cracked, or slipping. Verify fit with your model number.

Deck spindle belt for lawn tractors and walk-behind mowers. Replace when worn, cracked, or slipping to restore proper blade operation. Verify fit.

Replacement transmission belt for walk-behind mowers. Links rotating shafts for smooth operation. Replace if mower loses drive power or belt shows wear.

Replace your lawn tractor's worn drive belt to restore proper power transmission and prevent slipping. This 4L x 78-inch V-belt fits multiple models.

This V-belt is designed for use in snowblowers by several major manufacturers. It is used to rotate the blades in the blower and acts as the primary belt for the device. These belts are made of a rubber material, which means they can sometimes stretch out, break, or wear down. If this occurs, the V-belt needs to be replaced to ensure the snowblower continues to work at its best.The more frequently a snowblower is used, the more likely it is that a replacement V-belt will be needed. In some cases, a V-belt can wear out more quickly than expected due to faults like mechanical failures. When the belt is overly worn, it can cause the snowblower to act sluggishly since the belt can slip off of the pulley. If the belt breaks, the snowblower will no longer be able to operate. When replacing the belt, drain the fuel and remove the spark plug for a safe repair.This V-belt is a genuine OEM replacement part that is sourced directly from the manufacturer. It's made for use with snowblowers by Craftsman, Yard-Man, Cub Cadet, Huskee, Troy-Bilt, MTD, and Yard Machines. It is sold as an individual component.

Drive belt for gas snowblowers and snow throwers. Replace if you notice slipping, cracking, or loss of power during operation. Verify fit with your model.