Parts for Bosch B36CD50SNS/01: Compressor & Condenser Parts

This Damper is an OEM part for Bosch Refrigerators. It regulates the airflow between the refrigerator and freezer compartments to maintain the desired temperature. Continuous use or mechanical issues can lead to problems with this part.

What Causes a Bad Damper:
Continuous operation, wear, or mechanical failures can cause the damper to malfunction, affecting temperature regulation.

Symptoms of a Bad Damper:

• Inconsistent temperature between refrigerator and freezer compartments
• Excessive cooling or freezing in the refrigerator section
• Inadequate cooling in the refrigerator or freezer

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This fan motor circulates cold air over the evaporator to help maintain even refrigerator/freezer temperatures. Replacing a worn motor restores proper airflow and can resolve cooling inconsistencies and excessive noise. What it does:

• Spins the evaporator fan blade to move cold air through the compartment
• Helps maintain consistent internal temperatures for food preservation
• Can eliminate whining, buzzing, or no-run symptoms caused by a failed motor
• Works with the fridge's fan assembly to support proper defrost and cooling cycles

• One fan motor

• Disconnect power to the appliance before starting any repair
• Handle the motor and wiring harness carefully; avoid bending terminals
• Remove interior panels or shelving as needed to access the evaporator fan housing

This Program Power Control Module is the electronic control board that manages cycle selection and power distribution for the appliance, restoring proper program sequencing and responsive controls when the original board fails. What it does:

• Interprets user inputs and starts or advances wash/dry cycles
• Regulates power to motors, valves, heaters and other subsystems as commanded
• Can prevent cycles from starting or cause unresponsive controls when faulty
• May be linked to intermittent operation, error codes, or failure to complete programs

• Disconnect power to the appliance before beginning any repair
• Handle the board carefully to avoid static discharge or damage to connectors

The Freezer Power Control Module is an OEM part for Bosch refrigerators. As its name suggests, this electronic component is responsible for regulating and distributing power to the refrigerator's freezer compartment. It monitors and controls temperatures, fan speeds, defrost cycles and other critical processes to maintain optimal performance. 

Causes of a bad control module can include component failures due to age or excessive moisture exposure. Signs include inconsistent freezer temperatures, defrost issues, lack of fan operation, and other cooling/performance problems.

Symptoms of a bad control module include:

• Fluctuating or unregulated freezer temperatures 
• Failure to engage in automatic defrost cycles
• The fan not turning on or making abnormal noises
• Control board lights/functions not working properly

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models. 

The PC Board Assembly-Main is an OEM part for Bosch refrigerators. As the main printed circuit board, it acts as the central control center for operating refrigeration system components.

The main PC board monitors temperature sensors, controls door alarms, and regulates circulation fans, defrost heaters, compressors, and more based on cooling demands. It communicates digital signals to run all cooling and freezing functions properly per set parameters.

Causes of a bad main PC board can include circuit failures, shorts, liquid damage, or surges over time.

Symptoms of a bad main PC board include:

• Inability to adjust temperature settings
• Refrigerator failing to cool or freeze sufficiently
• Lights or electronic displays malfunctioning
• Abnormal operational noises

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inverter is the motor control module that regulates motor speed and power delivery for dishwasher operation, helping restore normal wash cycles and reliable motor performance when the original control fails. What it does:

• Controls and adjusts motor speed and torque for wash pump and circulation functions
• Converts incoming power to the proper voltage/frequency for the appliance motor
• Helps prevent erratic motor behavior, such as intermittent stopping or loss of agitation
• Commonly replaced when the dishwasher won't start, shows motor-related error codes, or runs but won't pump or spin properly

• Disconnect power to the appliance before starting; verify power is off at the breaker
• Handle the module carefully to avoid damage from static electricity; use ESD precautions if available
• Reinstall using existing mounting points and connectors; do not force connectors—ensure proper seating
• After installation, restore power and run a short diagnostic or test cycle to normal motor operation

The Power Cord is an OEM part for Bosch refrigerators. This high-quality power cord is designed to meet Bosch's safety and performance standards, ensuring your refrigerator operates smoothly without any power interruptions. 

Causes of a bad part can include physical damage from moving the refrigerator, pets chewing on the cord, or wear and tear over time.  

Symptoms of a bad Power Cord include:

• The refrigerator not receiving power, indicated by no lights, display, or cooling action.
• Flickering lights or intermittent operation, suggesting a loose or faulty connection.
• Visible wear or damage to the cord, such as fraying, cuts, or burn marks, which could pose safety risks.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This drain gutter is the molded channel that collects and directs wash water toward the dishwasher drain, helping prevent pooling at the tub base and under the door. It restores proper water flow inside the lower tub area. What it does:

• Channels leftover wash and condensation to the pump/drain to avoid water buildup under the door
• Helps reduce leaks and water pooling at the bottom front of the tub
• Replaces cracked or warped gutters that cause misdirected drainage or visible water inside the door area
• Matches OEM shape so water follows the intended path to the drain system

• One drain gutter

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door or lower access panel per the service instructions to reach the gutter
• Handle carefully to avoid damage to the molded edges and to prevent contact with sharp cabinet or panel edges
• Secure mounting so the gutter seats fully to the tub and mates properly with adjacent seals