Parts for Bosch B36CD50SNS/01: Freezer Door & Drawers Parts

This outer door panel restores the dishwasher's exterior surface and helps protect internal components from moisture and damage. Designed to match the original fit and finish for straightforward replacement. What it does:

• Replaces a damaged, dented, or scratched outer door surface to improve appearance
• Protects the inner door components, control area, and insulation from moisture
• Helps maintain proper door alignment and sealing when installed correctly
• Can reduce rattling or abnormal movement caused by bent or warped panels

• Recommended for users comfortable with removing and reinstalling appliance doors; two people may be helpful for large panels
• Disconnect power and water supply to the appliance before starting any repairs
• Handle carefully to avoid scratching the finish and to protect mounting tabs and trim
• If screws, clips, or trim are damaged or missing, replace them before completing installation

The Freezer Door Gasket is an OEM replacement part for Bosch refrigerators. As a thin, foam sealing ring located around the inside perimeter of the freezer door, it creates an airtight barrier preventing cold air leakage. The door gasket withstands temperature fluctuations from frequent openings and closings.

Causes of a bad freezer door gasket can include cracks or splits due to normal drying and usage over time, or accidental damages compromising the seal.

Symptoms of a bad freezer door gasket include: 

• Inability to maintain proper freezer temperature levels  
• Frost buildup indicating cold air leakage issues
• Higher energy bills from the refrigerator working harder
• Potential ice or frost accidentally falling upon door opening  

Replacing your worn or damaged gasket helps restore efficient cooling performance. This genuine Bosch part ensures continued reliability while preventing loss of cold air and energy costs. It is also compatible with Thermador, Gaggenau and select Kenmore units.

This fixture is a small mounting bracket used to secure internal components in place and restore proper alignment. It replaces a damaged or missing mounting point so parts stay stable during normal operation. What it does:

• Secures internal assemblies or components to the appliance cabinet or housing.
• Prevents movement, rattling, or misalignment caused by a broken or missing mount.
• Helps maintain proper clearance and positioning for connected parts.
• Commonly replaced when the original bracket is cracked, bent, or otherwise failed.

• Install with the OEM fasteners specified for your model; do not overtighten.
• Disconnect power to the appliance before accessing internal components.
• If other parts are damaged or fasteners are missing, inspect and replace as needed.

This guide is a replacement rack guide that supports and guides a dishwasher rack along its track for smooth, stable sliding and proper alignment. It helps reduce rack wobble and prevents the rack from coming off the rails. What it does:

• Guides the rack along the track to ensure smooth in-and-out motion
• Keeps the rack aligned to prevent tipping or derailment during use
• Reduces noise and binding caused by misaligned or worn guides
• Restores proper rack travel when original guide is broken, cracked, or worn

• Disconnect power and turn off water supply before servicing the appliance
• Remove the affected rack to access the guide and inspect surrounding hardware
• Replace guide by aligning it on the track and securing per appliance design (snap or fasten as required)

This guide helps support and align a sliding drawer or basket so it opens and closes smoothly and stays on track. Replaces a damaged or worn guide to restore proper movement and prevent misalignment. What it does:

• Supports the drawer or basket along its track for stable, even movement
• Keeps the drawer aligned to prevent catching, sticking, or tilting
• Reduces noise from a loose or misaligned drawer during opening/closing
• Helps maintain proper clearance so the drawer engages rollers or slides correctly

• Disconnect power to the appliance before beginning any work
• Remove the drawer/basket per the appliance instructions to access the guide
• Use basic hand tools; avoid forcing parts to prevent breakage
• Inspect mating slides/rollers and replace if worn to ensure smooth operation

This replacement drawer restores a secure, easy-to-use sliding compartment in compatible Bosch appliances, helping keep cookware and utensils organized and accessible. It's a direct-fit drawer component meant to replace damaged, cracked, or non-closing drawers. What it does:

• Provides a stable sliding compartment for storing cookware, pans, or utensils inside the appliance.
• Replaces cracked, broken, or warped drawers that can no longer hold items securely.
• Helps resolve symptoms like a drawer that won't close, binds or jams when sliding, or drops items during use.
• Restores proper alignments with existing slide hardware so the drawer opens and closes smoothly.

• Disconnect power (and water, if applicable) before beginning any repair.
• Remove surrounding trim or panels and retain mounting hardware for reinstallation.
• Inspect existing slide/rail hardware for damage; replace rails if worn to ensure proper operation.

This clamping piece is a small securing element used inside the appliance to hold a component firmly in place. Replacing a cracked or missing clamp helps stop parts from shifting and keeps the assembly stable.

• Holds a mating part or subassembly securely in position
• Helps prevent vibration, rattling, or misalignment from loose components
• Direct replacement for a broken, deformed, or missing clamp
• Common signs include loose fitment or parts that won't stay secured

• Disconnect power before servicing; if working near water or gas lines, shut off the supply
• Access the area and note the original orientation
• Remove the damaged piece and install the new clamp fully until it seats securely
• Reassemble and verify the secured part is stable before returning to service

This door handle restores easy, reliable opening and secure closing of your appliance door. Replace a cracked, loose, or broken handle to regain safe operation and a finished appearance. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces handles that are cracked, loose, or detached and can improve door function.
• Helps prevent the door from catching or sticking during normal use.
• Matches the original part's shape and finish for a consistent look.

• Disconnect power or unplug the appliance before starting any repair.
• Access may require removing trim or an inner door panel; retain original fasteners when possible.
• Handle typically secures with screws or clips — use proper tools and avoid overtightening.

This replacement fixture is the mounting bracket that secures internal components inside compatible Bosch appliances, helping restore proper alignment and reduce noise from loose parts. It's a direct-fit replacement when the original bracket is broken or missing. What it does

• Provides a secure mounting point for internal hardware and assemblies.
• Keeps parts aligned to prevent rubbing, vibration, and rattling during operation.
• Helps maintain consistent performance by preventing component shift or misplacement.
• Commonly used when the original fixture is cracked, warped, or detached.

• Disconnect power and, if applicable, water supply before beginning any service.
• Basic hand tools typically required; follow OEM orientation and fastening locations.
• Inspect adjacent clips, screws, and mounts and replace if damaged.
• Do not overtighten fasteners; ensure proper alignment before final torque.

This replacement fixture is a small mounting bracket that secures interior components in place so assemblies stay aligned and operate quietly. It restores proper fit and prevents loose or shifting parts. What it does:

• Secures and supports an internal assembly or component to the appliance frame
• Helps prevent rattling, vibration noise, and misalignment of the attached part
• Restores correct positioning after a cracked or broken mounting point
• Used wherever a dedicated bracket/fixture is specified by the OEM

• One replacement fixture/mounting bracket

• Disconnect power and water before beginning any repair
• Access may require removal of panels or trim; retain all fasteners for reassembly
• Fasten with the OEM screws or clips specified for your model; do not force or over-tighten
• If the original mounting point is damaged, additional repair to the surrounding area may be needed

This genuine screw secures appliance panels and components to keep them tight, aligned, and rattle-free. Replace missing, stripped, or corroded hardware to restore a solid fit and reliable operation.

• Fastens panels, brackets, and internal assemblies to the chassis
• Helps maintain alignment and reduces vibration during use
• Replace if the original screw is missing, stripped, rusted, or damaged
• Common signs include loose or rattling panels and hardware that will not tighten

• Disconnect power and shut off water/gas before servicing
• Match thread and length to the original screw; replace like-for-like
• Hand-start to avoid cross-threading; tighten firmly without overtightening
• Replace screws in sets when needed to ensure even clamping and fit

The Screw Fridge is an OEM part for Bosch refrigeration units. It plays an important mounting and joining role throughout the fridge construction. 

Causes of a bad screw fridge could include corrosion from repeated exposure to moist environments inside the unit. Improper torque levels during prior installations may also cause screws to loosen or strip over time.

Symptoms of issues include: 

• Vibrations or rattling noises from unsecured components 
• Doors or shelves that are loose or misaligned
• Leaking due to compromised seals around mounted surfaces

Replacing subpar screws prevents further degradation and restores proper holding strength. Bosch quality fasteners ensure durable, rattle-free operation for the life of the appliance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some KitchenAid refrigerator models. Reliable repairs start with genuine replacement parts.
 

This guide helps keep the dishwasher rack aligned and sliding smoothly, restoring proper rack movement and preventing jams or tipping. Ideal when a rack drags, shifts, or won't roll in and out evenly. What it does:

• Guides the rack along its track to ensure smooth, consistent sliding
• Prevents the rack from binding, shifting, or tipping during use
• Reduces noise caused by worn or damaged rack movement components
• Helps maintain proper load alignment for safe loading and unloading

• Disconnect power and water to the appliance before starting any repair
• Inspect the track and rollers for damage; replace any worn components to ensure proper function
• Typically secures with clips or screws—retain fasteners and follow OEM instructions

This replacement door handle restores a secure, easy-to-grip pull for your appliance door, returning smooth opening and reliable operation. Designed to match the original fit and finish for a straight swap. What it does

• Replaces a worn, cracked, or broken door handle so the door opens and closes properly
• Provides a secure grip to prevent slipping or accidental drops when opening the door
• Restores the original look and finish for a clean, consistent appearance
• Helps prevent damage to the door face or finish from makeshift pulls

• Use proper tools and disconnect power (or water, if applicable) before starting work
• Keep mounting screws and small parts organized to avoid loss during reassembly
• Inspect mounting points and replace any damaged screws or clips for a secure fit