Parts for Bosch B36CD50SNS/01: Ice Maker & Drawer Parts

A small mounting plate that secures internal components so they stay properly aligned and stable during operation. Replaces a worn or broken retaining plate to reduce rattling and restore secure fitment of the assembly. What it does:

• Holds an internal assembly or component in place to prevent unwanted movement
• Helps maintain proper alignment of connected parts for correct operation
• Reduces noise and vibration caused by a loose or damaged mounting point
• Restores the original fit where a bent, cracked, or missing plate allowed play

• Disconnect power and water before beginning any repair
• Access the plate by removing the appropriate cover or panel
• Handle components gently and ensure the plate is seated and fastened securely

This replacement interior storage drawer restores a damaged or missing drawer so you can store and access items safely and smoothly. Designed to match the OEM fit and finish for a tidy, secure installation. What it does:

• Replaces a cracked, warped or broken drawer to restore full storage function
• Prevents items from falling through or shifting during use by providing a stable compartment
• Eliminates scraping, sticking, or misalignment caused by a damaged drawer
• Helps the appliance close and seal properly when the drawer is correctly seated

• Inspect mounting rails and clips for damage before installing the new drawer; replace any worn hardware
• Slide the drawer onto the rails and engage the tracks evenly and glide smoothly
• Disconnect power or follow appliance-specific safety instructions before doing any repairs
• If the drawer front or trim is damaged, consider replacing both components for a uniform fit and appearance

This guide helps support and align a dishwasher rack so it slides smoothly in and out, restoring proper rack movement and reducing noise or catching. A simple replacement for bent or worn rack guides. What it does

• Replaces damaged or worn rack guide hardware that causes the rack to stick, tilt, or fall out
• Keeps the rack properly aligned for smooth, even sliding along the track
• Reduces grinding, scraping, or loud movement when opening or closing the rack
• Helps prevent rack misalignment that can interfere with loading or spray arm operation

• One replacement guide

• Disconnect power (unplug or turn off breaker) before accessing internal dishwasher components
• Remove the affected rack and slide assembly per your model's service instructions to access the guide
• Verify the guide orientation and any retaining clips or screws; reuse or replace fasteners as required
• If you encounter broken clips or additional damage, inspect adjacent parts before reassembly

This rack guide keeps a dishwasher's upper rack aligned and sliding smoothly along its track, restoring reliable rack movement and preventing derailment. It replaces a cracked, worn, or broken guide for proper rack support. What it does

• Guides the upper rack along the slide rails to ensure even, quiet movement
• Prevents the rack from slipping off or catching during loading and unloading
• Helps eliminate grinding or scraping noises caused by a broken guide
• Restores proper rack alignment for full access to dishes during loading

• One rack guide

• Turn off power to the appliance before starting any repairs
• Remove the upper rack and locate the damaged guide on the rail for replacement
• Most guides snap or clip into place; use gentle pressure and avoid forcing plastic parts

This dishwasher circulation pump motor drives water flow through the spray arms to enable cleaning. Replacing a failed motor restores normal wash performance and water movement for effective cycle operation. What it does:

• Spins the circulation pump impeller to move wash water through spray arms during cycles
• Restores proper water pressure and spray coverage when the motor has failed or seized
• Helps resolve symptoms such as no water circulation, weak spray, or unusual motor noise
• Works with the dishwasher's wash system to maintain consistent cleaning performance

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Access typically requires removing the dishwasher tub access panel and pump housing; handle internal components carefully
• Inspect seals and gaskets during reassembly and replace if damaged to prevent leaks

This ice container stores and channels ice produced by the refrigerator's ice maker so cubes are held ready for use and dispensing. It replaces a cracked or missing bin to restore safe ice collection and tidy storage. What it does

• Collects and holds ice made by the ice maker so cubes are contained and accessible.
• Guides ice toward the dispenser area (where applicable) to help prevent jams.
• Prevents loose ice from scattering in the freezer compartment.
• Helps maintain sanitary storage by keeping ice separated from other foods.

• Disconnect power to the appliance before removing or installing the ice container.
• Remove any remaining ice before handling to avoid spills and slipping hazards.
• Slide or snap the bin into place per the refrigerator's service instructions; do not force.

The Ice Maker is an OEM part for Bosch refrigerators. Located inside the freezer compartment, it automatically produces batches of bullet-shaped ice using an integrated mold and water supply. After each cycle, the ice maker distributes perfectly formed ice cubes into the storage bucket for easy access.

Causes of ice maker issues involve failures within the mold assembly, water control valves or electrical components over time due to repeated use. Mineral buildup from hard water sources can also clog mechanisms.

Symptoms of a bad ice maker include:

• Incomplete or inconsistent ice production
• Jammed or overflowing ice molds
• Cracked cubes or foul-smelling ice
• Water dripping from the unit

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This Flap (assembly) is the OEM replacement part that restores the opening/closing action of the appliance flap or door area, helping proper airflow or product access. Replaces a worn, cracked, or broken flap to restore normal operation. What it does:

• Acts as the moveable door/flap that opens and closes to allow access, airflow, or dispensing
• Prevents gaps that can cause leaks, spills, or improper sealing
• Restores smooth movement when original flap is stuck, warped, or broken
• Helps maintain correct operation of the surrounding mechanism or dispenser

• Turn power off and unplug the appliance before starting any service
• Verify part orientation and engagement points before fastening; inspect adjacent clips or pivots for wear
• Use appropriate hand tools; avoid forcing plastic tabs to prevent breakage

This bottom heater is the replaceable heating element that provides the primary heat source for the appliance's drying/heating cycle. Replacing a failed heater restores proper operating temperature and improves drying or wash performance. What it does:

• Generates heat used during the appliance's heating/drying cycle
• Works with thermostats and thermal fuses to maintain operating temperature
• Common failure symptoms: no heat, reduced heat, longer dry times, or interrupted cycles
• Failsafe interaction: a damaged element can cause thermal cutoff or fuse trips

• Disconnect all power before starting any repair to avoid shock or equipment damage
• Handle the heating element carefully to avoid bending or damaging terminals and insulation
• Test the appliance on a short cycle after installation to confirm proper operation.

This exhaust baffle directs and protects the dishwasher vent to help prevent steam and food debris from entering the vent path. It restores proper venting to reduce steam buildup and help maintain drying performance. What it does:

• Guides exhaust steam out of the dishwasher and away from the cabinet
• Helps block food particles and debris from entering the vent path
• Reduces visible steam and condensation around the door area
• Supports consistent draining of moisture from the tub during the drying cycle

• One exhaust baffle

• Designed to replace a damaged or missing vent baffle; verify fit with your model before installing
• Typically snaps or slides into place—no special tools required for many models
• Disconnect power and water to the appliance before performing any repairs

This is a replacement service access cover that protects internal components and keeps debris and moisture out of the appliance. It restores a finished appearance and secures parts behind the access area. What it does:

• Covers and protects internal controls or components from dirt and accidental contact
• Prevents loose parts from rattling or shifting behind the panel
• Stops debris build-up in the service area to help maintain normal operation
• Helps restore cosmetic appearance when the original cover is cracked, broken, or missing

• Disconnect power (and water, if applicable) before beginning any repair.
• Removal/installation typically requires removing a few screws; keep hardware for reuse unless replacements are provided.
• Handle gently to avoid cracking the new cover; use gloves to protect hands and the part.

This screw is a factory replacement fastener used to secure appliance panels and components, restoring proper fit and reducing vibration. It's a direct-fit part that replaces worn or missing hardware for reliable reassembly. What it does

• Secures trim, panels, brackets or internal components to maintain proper alignment and reduce noise
• Restores missing or damaged hardware that can cause rattling or loose parts
• Matches OEM threading and head style for correct engagement and fit
• Helps ensure safe operation by keeping covers and guards properly attached

• Disconnect power and/or water to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Replace only with the exact part number when specified for fit and safety