Parts for Bosch B36CD50SNS/01: Refrigerator Doors & Shelves Parts

This outer door panel restores the exterior of your dishwasher, protecting internal components while improving appearance. It replaces a damaged or dented door surface and helps the door close and latch properly. What it does:

• Covers and protects the dishwasher's internal door structure and components
• Restores a damaged or dented exterior surface for improved appearance
• Helps ensure proper door alignment and sealing for reliable closing
• Reduces exposure of internal parts to moisture and debris

• Disconnect power and water supply before beginning any repair
• Handle carefully to avoid cosmetic damage or bending during installation
• Typical installation requires removing the inner door panel/trim and unfastening mounting screws; keep fasteners organized

This replacement door seal is the flexible gasket that creates a watertight barrier at the appliance door, helping prevent leaks and keeping the wash/dry chamber sealed for proper operation. What it does:

• Seals the door to prevent water from leaking during cycles
• Helps maintain proper internal pressure and cleaning/drying performance
• Reduces water pooling and potential floor damage near the appliance
• Common symptom: visible leaks, water on the floor, or a door that won't seat fully

• One door seal/gasket

• Inspect surrounding door surfaces for damage or debris before installing
• Clean mating surfaces thoroughly so the new gasket seats correctly
• Some models require partial door disassembly; follow the OEM instructions

The Fresh Food Door is an OEM part for Bosch refrigerators. The fresh food door endures extensive opening and closing usage cycles.

Causes of a bad door can include failure of door seals letting warm air in over time. Damage such as dents or punctures from impact may also compromise refrigerator insulation integrity.

Symptoms of a bad door include:

• Inability to maintain proper temperature levels inside
• Frost or condensation issues around door surfaces
• Difficulty opening and closing the door smoothly
• Leaks developing at door seams or gaskets

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This interior appliance lamp provides bright illumination so you can see inside the appliance clearly. It replaces a burnt-out or dim light to restore safe, easy viewing of the cavity. What it does:

• Replaces a failed interior lamp so the appliance light turns on when the door is opened or the light circuit is activated
• Restores visibility for loading, unloading, and checking food without opening the door longer than necessary
• Common symptom: no interior light or noticeably dim light when the appliance door is opened
• Works as the direct replacement lamp for the specified appliance light housing and socket

• One replacement lamp

• Disconnect power or unplug the appliance before replacing the lamp to avoid shock
• Allow the lamp and surrounding area to cool before handling to avoid burns
• Remove the lamp cover or housing, replace the lamp, and reinstall the cover securely
• Handle bulbs with a clean cloth or gloves; avoid touching the glass with bare hands if the lamp type requires it

This light bar provides the illuminated strip for the appliance control panel so button labels and status indicators are visible. Replaces a cracked, dim, or non-illuminating panel light to restore clear control visibility. What it does:

• Houses the light elements that illuminate the control area for easier reading and use
• Restores visible status indicators when original light strip is dim or unlit
• Replaces cracked or discolored lens that diffuses or blocks light
• Helps resolve intermittent or no-backlight symptoms when the light bar itself is the faulty component

• Disconnect power to the appliance before beginning any work
• Access typically requires removing the control panel or console; keep fasteners and clips organized
• Handle the lens and light elements carefully to avoid scratching or damaging the optics

This traverse linkage is the replacement mechanical link used to transfer motion between connected components, restoring proper movement and alignment. It helps repair sticking, uneven travel, or loss of coordinated motion in the affected mechanism. What it does:

• Reestablishes mechanical connection between moving parts so they operate together
• Prevents binding or uneven travel caused by damaged or worn linkage
• Reduces abnormal noise or grinding from misaligned components
• Restores reliable actuation when the original linkage is broken or bent

• One traverse linkage as shown

• Inspect surrounding hardware and mounting points; replace any worn fasteners or clips
• Use appropriate hand tools; avoid over-tightening to prevent binding
• Disconnect power or follow equipment-specific safety procedures before beginning work

This factory replacement tray restores a clean, secure surface inside your appliance. It's built to the original dimensions for proper support and fit, helping items sit or slide correctly and keeping the interior organized. What it does:

• Provides a stable, correctly sized platform/receptacle in the appliance
• Helps contain minor drips or crumbs as designed by the unit
• Restores proper fit when the original tray is cracked, warped, or missing
• Reduces wobble, rattling, or poor seating caused by damage or wear

• 1 tray

• Disconnect power and allow any hot surfaces to cool before service
• Remove the old tray carefully and clean the mounting area or tracks
• Seat the new tray in the correct orientation; do not force into place
• Verify smooth movement/secure seating and avoid overloading the tray

The Door Shelf Bin is an OEM part for Bosch refrigerators. It is a plastic storage shelf that mounts inside the refrigerator door, providing convenient access to condiments, drinks, and other small items.  

Symptoms of a bad door shelf bin include:

• Sagging or unstable shelving that does not properly hold storage items  
• Items falling out of the shelf during opening/closing of the door
• Missing brackets or screws that result in an unsecured or unmounted shelf

Causes of a bad door shelf bin can include wear and tear from repeated opening and closing of the refrigerator door over time, cracks or damage from heavy loading, or loose/faulty mounting brackets that no longer secure the shelf firmly in place. 

This shelf is also compatible with some Thermador, Gaggenau, and Kenmore models using a similar door shelf design.
 

This replacement glass panel restores a clean, intact glass surface and factory appearance when the original panel is cracked, shattered, or damaged, helping maintain safe use and a like-new look. What it does:

• Forms the appliance's visible glass surface
• Protects underlying components and provides a finished appearance
• Replace if glass is cracked, chipped, shattered, or has sharp edges
• Also indicated by staining, crazing, or a loose/rattling panel that won't secure

• 1 glass panel

• Disconnect power and allow the appliance to cool before service
• Wear cut-resistant gloves and eye protection; handle tempered glass carefully
• Support the panel while removing/attaching fasteners; transfer any reusable trim or brackets from the old panel
• Do not overtighten fasteners; avoid striking or setting glass on hard edges

This fixture is a genuine replacement mounting component that holds and secures its matched part in place within your appliance. Replacing a damaged fixture restores proper fit, stability, and dependable operation.

• Secures the associated component in its correct position within the appliance
• Helps prevent movement, rattling, or misalignment during operation
• Maintains proper spacing and support for the assembly
• Common signs of failure include cracks, stripped mounting points, or a loose or sagging part

• Disconnect power; shut off gas and water supplies before servicing
• Use proper PPE and beware of sharp edges or hot components
• Note original orientation and retain screws/clips for reuse unless replacements are provided
• After installation, verify alignment and test operation

This door handle restores easy, reliable opening and secure closing of your appliance door. Replace a cracked, loose, or broken handle to regain safe operation and a finished appearance. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces handles that are cracked, loose, or detached and can improve door function.
• Helps prevent the door from catching or sticking during normal use.
• Matches the original part's shape and finish for a consistent look.

• Disconnect power or unplug the appliance before starting any repair.
• Access may require removing trim or an inner door panel; retain original fasteners when possible.
• Handle typically secures with screws or clips — use proper tools and avoid overtightening.

This genuine screw secures appliance panels and components to keep them tight, aligned, and rattle-free. Replace missing, stripped, or corroded hardware to restore a solid fit and reliable operation.

• Fastens panels, brackets, and internal assemblies to the chassis
• Helps maintain alignment and reduces vibration during use
• Replace if the original screw is missing, stripped, rusted, or damaged
• Common signs include loose or rattling panels and hardware that will not tighten

• Disconnect power and shut off water/gas before servicing
• Match thread and length to the original screw; replace like-for-like
• Hand-start to avoid cross-threading; tighten firmly without overtightening
• Replace screws in sets when needed to ensure even clamping and fit

The Screw Fridge is an OEM part for Bosch refrigeration units. It plays an important mounting and joining role throughout the fridge construction. 

Causes of a bad screw fridge could include corrosion from repeated exposure to moist environments inside the unit. Improper torque levels during prior installations may also cause screws to loosen or strip over time.

Symptoms of issues include: 

• Vibrations or rattling noises from unsecured components 
• Doors or shelves that are loose or misaligned
• Leaking due to compromised seals around mounted surfaces

Replacing subpar screws prevents further degradation and restores proper holding strength. Bosch quality fasteners ensure durable, rattle-free operation for the life of the appliance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some KitchenAid refrigerator models. Reliable repairs start with genuine replacement parts.
 

This firm plate is a small metal mounting plate that secures and supports nearby components so assemblies stay aligned and stable. It restores proper fit and reduces movement in the area where it's installed. What it does:

• Provides a stable mounting surface to keep panels or components aligned
• Prevents shifting or vibration that can cause noise or wear
• Helps maintain correct positioning for adjacent parts and fasteners
• Can correct symptoms such as loose panels, rattling, or misaligned assemblies

• One firm plate

• Disconnect power and water before starting any repair
• Remove access panels and fasteners as needed to reach the mounting location
• Use appropriate tools and hardware; replace any damaged screws or clips
• Handle edges carefully and avoid overtightening fasteners to prevent distortion

This replacement refrigerator door handle restores a secure grip and proper door operation for one side of the appliance. Durable molded construction matches the original fit and finish to keep the door sealing and opening correctly. What it does:

• Provides a solid, ergonomic grip for opening and closing the refrigerator door
• Restores correct door alignment and latch engagement when a handle is broken or loose
• Helps prevent further cabinet or finish damage caused by using a damaged handle
• Matches OEM mounting points for a direct-fit replacement

• Installation requires basic hand tools; handle typically mounts with screws beneath a trim or inside the door edge
• Keep power off to appliances with electrical components near the work area if applicable
• Tighten mounting hardware securely but avoid overtightening to prevent cracking the handle or trim

This control display is the electronic user interface that shows time, temperature and settings and lets you select oven functions. Replacing a faulty display restores clear status readout and reliable input response. What it does

• Provides visual readout of clock, temperature, timers and selected cooking modes
• Receives touch or button inputs to set cycles, start/stop and adjust settings
• Common symptom relief: blank or flickering screen, unresponsive controls, incorrect or missing readouts
• Works as the primary interface between the user and the oven's control electronics

• Disconnect power at the breaker before beginning any repairs to avoid shock.
• Handle the glass/face and connectors carefully to prevent cracking or damage.
• Support the module while disconnecting ribbon and wire connectors; note connector positions for reassembly.
• Test the display and functions after reconnecting power before fully reassembling the unit.

The Ice Door Module is an OEM part for Bosch refrigerators. It is a component responsible for controlling the opening and closing of the ice door in the door. The module includes electronic controls that regulate the door mechanism to ensure reliable and consistent ice dispensing.

Symptoms of a bad module include:

• The ice door failing to open fully or latch closed properly
• Difficulty dispensing ice or jamming during dispensing
• Electronic controls malfunctioning or unresponsive buttons
• The ice door becoming misaligned or uneven

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This decor plate is the finished trim that covers and protects the oven control panel, restoring the appliance's appearance and providing a clean, uniform surface. It's ideal for replacing scratched, dented, or discolored trim. What it does:

• Covers and protects the control-panel area from spills, scratches, and cosmetic damage
• Restores a uniform, finished look to the front of the appliance
• Helps keep controls and internal components shielded from everyday wear
• Replaces bent, cracked, or visibly worn trim that affects appearance

• Disconnect power to the appliance before beginning any service.
• Removal of surrounding trim, control module, or the door may be required; keep all fasteners and note their locations.
• Handle the plate carefully — edges may be sharp and surface finishes can scratch.
• Test fit before final fastening to ensure correct alignment.

This replacement cover protects and conceals internal components on compatible Bosch appliances, restoring the finished appearance and helping keep moisture and debris away from sensitive parts. What it does:

• Shields internal components and wiring behind the panel or door area
• Hides mounting hardware and provides a finished, uniform look
• Helps limit exposure to moisture and debris that can cause corrosion
• Maintains proper clearance and alignment where the cover is used

• Disconnect power to the appliance before beginning any work
• Installation typically requires basic hand tools (screwdriver); retain all fasteners
• Handle the cover carefully to avoid scratching the finish

This replacement tray restores the damaged or worn support tray used in select Bosch appliances, helping keep components stable and maintain proper function. It's a direct-fit service part when the original tray is cracked, warped, or missing. What it does:

• Supports internal components and helps maintain proper alignment inside the appliance
• Provides a stable surface to prevent parts or small items from shifting during operation
• Helps contain minor drips or debris that would otherwise collect inside the cabinet area
• Replacing a damaged tray can reduce noise and prevent rubbing or intermittent contact

• Disconnect power (and water if applicable) before attempting any service
• Remove panels or racks as needed to access the tray; keep track of fasteners
• Inspect surrounding parts and mounting points for damage before installing the new tray