Parts for Bosch B36IT70NNP/08: Compressor Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This foot installs at the appliance base to support and level the unit. Replacing a worn or missing foot restores stability, reduces vibration and rattling, and makes accurate leveling easier.

• Provides a stable contact point between the appliance and the floor
• Allows height adjustment during leveling
• A damaged or missing foot can cause wobbling, uneven operation, vibration, or noise
• Common signs include cracking, deformation, or a loose/stripped attachment

• Disconnect power and shut off any utilities before servicing
• Carefully tip or raise the appliance to access the base; use a helper and proper supports
• Install the new foot and adjust height to level the unit
• Verify stability front-to-back and side-to-side after re-leveling

Replacement reel assembly designed to restore smooth winding and secure routing for a reel-based component in select Bosch appliances. Use this reel to replace worn or damaged reels and reduce snagging, rubbing, or loose routing. What it does:

• Winds and stores a cable, hose, or internal component to keep movement controlled and organized
• Restores smooth retraction/extension and reduces rubbing or binding
• Helps eliminate rattling or loose parts caused by a broken or worn reel
• Supports correct routing to prevent pinched wiring or hoses

• Disconnect power and water before beginning any repair
• Follow OEM instructions for disassembly and reel replacement
• Inspect mounting points and fasteners; replace any damaged clips or screws before reassembly
• Test the reel's movement and check for proper routing before returning the appliance to service

The Power Module is an OEM part for Thermador refrigerators. It receives signals from the user interface and sensors, and then processes and communicates the necessary commands to the different components of the refrigerator, such as the compressor, fans, and defrost system.

A bad power module can occur due to electrical surges, component failure, or internal malfunctions. Signs of a faulty board include erratic temperature control, unresponsive user interface, or complete loss of functionality.

Symptoms of a bad power module include:

• Inconsistent temperature control 
• Unresponsive user interface 
• Complete loss of power  

Replace your malfunctioning power module with this genuine OEM Thermador part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Power Module is an OEM part for Thermador refrigerators. It receives signals from the user interface and sensors, and then processes and communicates the necessary commands to the different components of the refrigerator, such as the compressor, fans, and defrost system.

A bad power module can occur due to electrical surges, component failure, or internal malfunctions. Signs of a faulty board include erratic temperature control, unresponsive user interface, or complete loss of functionality.

Symptoms of a bad power module include:

• Inconsistent temperature control 
• Unresponsive user interface 
• Complete loss of power  

Replace your malfunctioning power module with this genuine OEM Thermador part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

This plate is a replacement support plate used in the appliance's internal assembly to secure and stabilize components. It restores correct positioning of attached parts so assemblies sit firmly and operate quietly. What it does:

• Provides a stable mounting surface to hold internal components in proper alignment
• Helps reduce movement and vibration of attached parts during operation
• Keeps assemblies secured to prevent rubbing or interference with other parts
• Supports reliable operation by maintaining correct spacing and positioning

• One replacement plate as shown

• Verify appliance is powered off and disconnected before starting any repair
• Inspect surrounding fasteners and mounting points; replace any damaged hardware
• Tighten screws to snug only—avoid over-torquing which can deform the plate

This holder is a small mounting bracket that secures internal components in place, restoring proper alignment and preventing movement that can cause noise or functional issues. It's a simple replacement that helps keep assemblies stable. What it does:

• Secures and supports an internal component or assembly to the appliance frame
• Prevents rattling, shifting, or misalignment that can lead to poor performance
• Restores proper part positioning after breakage or wear
• Helps maintain safe, consistent operation by keeping parts fixed

• One holder / mounting bracket (exact item as shown)

• Inspect surrounding clips and fasteners; replace any that are damaged before installing
• Use basic hand tools; keep power disconnected before accessing internal panels
• Reassemble panels and run a short test cycle to confirm the component is secure and operating normally

This base panel is the lower trim piece that covers the appliance's kick area, restoring the finished look and protecting internal components from dust. It fits where the cabinet meets the floor and helps maintain a clean appearance. What it does:

• Replaces a damaged, dented, or missing lower/kick panel to restore aesthetics
• Shields the drawer cavity and internal components from debris and pet hair
• Prevents drafts from entering the appliance base area
• Keeps the appliance front looking flush with surrounding cabinetry

• One base panel

• High-level replacement: typically secures with clips or screws at the appliance base; access may require tilting the unit forward or removing the toe-kick.
• Keep power disconnected and appliances stable before starting work.
• Handle edges carefully to avoid cuts; use gloves if needed.
• If mounting hardware is missing or differs, verify hardware type before installing.

This adhesive tape is a narrow mounting and sealing strip used to secure trim, wiring, or small components and to help reduce rattles and moisture intrusion. It provides a simple replacement for worn or missing adhesive strips. What it does:

• Secures lightweight trim pieces, wire harnesses, and small components in place
• Helps reduce vibration noise and movement of parts
• Provides a basic moisture-resistant seal on smooth, clean surfaces
• Restores adhesive grip where original tape has failed or peeled

• One adhesive tape piece as shown

• Clean and dry surfaces thoroughly before applying for best adhesion
• Press tape firmly along its entire length; allow time to set before stressing
• Replace any tape that is degraded, contaminated, or losing adhesion
• Wear gloves if needed; avoid contact with skin and keep out of reach of children

This condenser fan circulates air across the condenser coil to help remove heat from the refrigerator, improving cooling efficiency and preventing compressor overheating. It replaces a worn or damaged condenser blower assembly. What it does:

• Moves air over the condenser coil to dissipate heat from the refrigeration system
• Restores proper condenser airflow when the original fan is seized, noisy, or not spinning
• Helps prevent excessive compressor run time and warm cabinet temperatures caused by poor condenser cooling
• Rubber mounts reduce vibration and noise transfer to the cabinet

• One condenser fan assembly with rubber mounting grommets

• Disconnect power to the appliance before starting and follow all safety precautions
• Access often requires removing the rear lower service panel or toe-kick; keep track of fasteners
• Handle the fan blade and motor carefully to avoid bending blades or damaging the shaft
• After installation, verify unobstructed blade rotation and test the unit for normal operation

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

The Housing is an OEM part for Bosch refrigerator and freezers. This part encases the water filter, ensuring it is securely positioned within the appliance to effectively filter out contaminants from the water supply. 

The need for replacing the Housing can arise from physical damage, such as cracks or breaks, which can occur from accidental impacts during filter changes or general wear and tear over time. 

Symptoms of a compromised Housing include:

• Leaks or dripping water near the filter area, indicating that the housing may be cracked or not sealing properly.
• Difficulty in installing or removing the water filter, which could suggest that the housing is damaged or warped.
• Unfiltered water taste or odor, hinting at an improperly seated filter due to a faulty housing.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Water Inlet is an OEM component specifically designed for Bosch refrigerators featuring internal water filtration and dispensing systems. It serves as the entry point for unpurified water into the appliance.

The water inlet utilizes precise engineering to thread securely onto liquid supply lines. Its feed line transport capacity is rated to withstand regular high-pressure pulses from large filtered volumes. 

Causes for inlet replacement typically relate to normal wear at the threaded fitting connection over time. Loosening can affect water tightness and risk leak development.

Symptoms of a failing water inlet include:

• Water leakage around the inlet fitting 
• Loose inlet face or threads requiring tightening
• Diminished water flow rates into the refrigerator 

 This OEM Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models utilizing matching water system architectures. Reinstallation restores a tight seal and reliable supply transport functionality.
 

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Water Filter Cap is an OEM part for Bosch refrigerators. This secures the water filter within the refrigerator, ensuring a snug and leak-free fit. 

The need for a replacement can arise if the original cap is lost during a filter change, damaged, or wears out over time. 

Symptoms of a missing or damaged Water Filter Cap include:

• Difficulty in installing or securing the water filter properly, which could lead to water leaks inside the refrigerator.
• Contaminants or particles in the dispensed water, indicating that the filter is not fully sealed and thus not effectively filtering the water.
• The water filter becoming loose or falling out, compromising the refrigerator's ability to provide clean, filtered water.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A replacement housing cover that protects internal components and helps keep the appliance sealed from debris and moisture. Replaces a worn or damaged cover to restore proper component protection and fit. What it does

• Shields internal motor, pump, or electrical components from debris and moisture.
• Helps maintain proper routing and positioning of nearby parts and wiring.
• Can prevent rubbing or contact-related noise caused by a cracked or loose cover.
• Common symptom: visible cracks, breaks, or a loose cover after impact or wear.

• One cover housing as shown.

• Disconnect power and water before starting any repair.
• Remove access panels or components only as needed to reach the cover; keep track of fasteners.
• Inspect surrounding seals, gaskets, and mounting tabs for damage and replace if necessary.

This replacement transformer supplies the lower control voltage used by the appliance's electronic control and user interface, restoring reliable power to control circuits and helping resolve power- or control-related failures. What it does:

• Steps down incoming voltage to the level required by control boards and electronic components
• Restores power to control panels, displays, and relays when the transformer has failed
• Can cause symptoms such as blank displays, unresponsive controls, or the appliance not powering on
• Supports safe operation by providing stable voltage to sensitive electronics

• Disconnect all power to the appliance before beginning service to avoid shock or injury
• Access typically requires removing the back or control panel; follow the appliance's service manual or diagram
• Match connector types and mounting points; replace only with the correct part number

A replacement shock absorber that cushions and appliance component to reduce noise and stabilize movement for smoother, more controlled operation. Restores dampening to doors or tubs that close unevenly or vibrate. What it does:

• Dampens and slows movement to prevent slamming and reduce impact wear
• Stabilizes panels or tubs to cut down on vibration and rattling sounds
• Helps maintain even, controlled closing and opening motion
• Commonly used when a door feels loose, drops, or closes too quickly

• Disconnect power (and water if applicable) before attempting service
• Retain original mounting hardware; only replace items explicitly listed as included
• Ensure correct orientation and secure fasteners; test operation after installation

The Sheet is an OEM part for Bosch refrigerators. It forms the interior lining of the machine compartment, which houses the refrigeration system and other essential components.

This sheet acts as a protective barrier, shielding the internal components from potential damage and ensuring their proper functioning.

Causes of a bad sheet can include wear and tear over time, accidental damage during maintenance or repair work, or exposure to moisture or extreme temperatures that can degrade the material.

Symptoms of a bad sheet include:

• Reduced cooling efficiency
• Increased energy consumption
• Condensation buildup inside the refrigerator
• Unusual noises from the machine compartment

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.