Parts for Bosch B36IT70NNP/08: Drawers 2 Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Lock Clamp is an OEM replacement part for Bosch refrigerators. It is a fitting that secures the freezer drawer in its closed position. Made of durable metal and plastic, the lock-clamp features a latching mechanism to fasten the door shut with an audible click. 

Symptoms of a bad lock clamp include:

• The freezer door not closing or latching securely
• Warm air escaping from around the door seal  
• Noise from a loose or poor-fitting lock-clamp
• The door popping open unexpectedly

Causes of a bad lock clamp can include wear and tear of moving parts over time, broken clips or latches from repeated use.

This OEM Bosch replacement lock clamp is compatible also with Thermador and Gaggenau model refrigerators

This ice maker assembly replaces the refrigerator's frozen-water harvesting module so your freezer can produce and dispense ice reliably. Restores automatic ice production when the original unit fails. What it does:

• Collects and freezes water, then cycles to eject ice cubes into the storage bin
• Triggers the fill valve to allow water into the mold during the harvest cycle
• Helps stop intermittent or complete ice production when the ice maker is worn or failed
• Can resolve issues like no ice production, small or misshapen cubes, or frequent cycling

• Disconnect power and shut off the refrigerator water supply before starting
• Handle the unit and connectors gently to avoid damaging the fill valve and wiring
• Confirm freezer temperature is within the manufacturer's recommended range for ice production after installation

The Freezer Clip is an OEM part for Bosch refrigerators. It is designed to secure various components within the freezer compartment, ensuring they remain in place during regular use and while opening and closing the freezer door.

Causes of a bad freezer clip can include wear and tear over time, breakage due to handling or impact, or exposure to extreme temperatures that cause the clip to become brittle and snap. Ensuring the clip is intact and functioning properly is essential for maintaining the organization and efficiency of the freezer space.

Symptoms of a bad freezer clip include:

• Items or shelves in the freezer becoming dislodged
• Difficulty in keeping freezer components in place
• Unusual noises from components moving within the freezer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Freezer Clip is an OEM part for Bosch refrigerators. It is designed to secure various components within the freezer compartment, ensuring they remain in place during regular use and while opening and closing the freezer door.

Causes of a bad freezer clip can include wear and tear over time, breakage due to handling or impact, or exposure to extreme temperatures that cause the clip to become brittle and snap. Ensuring the clip is intact and functioning properly is essential for maintaining the organization and efficiency of the freezer space.

Symptoms of a bad freezer clip include:

• Items or shelves in the freezer becoming dislodged
• Difficulty in keeping freezer components in place
• Unusual noises from components moving within the freezer

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This rail guides a dishwasher rack so it slides smoothly in and out, restoring proper rack alignment and reducing jams. It's a direct-fit replacement when an original rail is bent, worn, or broken. What it does

• Guides the rack on its rollers to keep it level and aligned during loading and unloading
• Prevents the rack from binding or derailing while extending or retracting
• Helps restore smooth rack movement if the original rail is bent, cracked, or worn
• Works with the rack rollers and end stops to maintain safe, consistent operation

• One replacement rail

• Basic tools are usually all that's required; verify rail orientation before removing the old part
• Remove the affected rack and rollers as needed to access and replace the rail
• Inspect rollers and end stops while servicing; replace any damaged components for best results
• Disconnect power to the appliance before performing any service that exposes wiring or electrical components

This small replacement clip secures a mating part in its proper position inside the appliance. Replacing a cracked or missing clip restores a snug fit, helps prevent vibration, and keeps components correctly aligned for dependable performance.

• Holds an attached component securely in its bracket or mounting point
• Helps eliminate looseness and rattling caused by a weakened or missing clip
• Maintains alignment to support proper operation and reduce wear
• Common symptoms: broken/missing clip, loose or wobbly part, rattling noises

• Disconnect power; turn off water or gas supply before servicing
• Note the original clip's orientation and take a reference photo before removal
• Avoid over-bending the new clip; replace any deformed mating parts
• Test operation before reassembling covers or panels

This replacement rail supports a dishwasher rack and restores smooth, stable sliding for loading and unloading. It helps keep the rack aligned so dishes move in and out without catching or tilting. What it does:

• Provides a smooth track for the dishwasher rack to roll on
• Keeps the rack properly aligned to prevent binding or tipping
• Reduces noise and rough movement caused by a worn or damaged rail
• Replaces cracked, bent, or broken rails that stop the rack from sliding

• One replacement rail

• Disconnect power and water to the appliance before starting any repair
• Remove the affected rack before replacing the rail to access mounting points
• Inspect mounting clips or rollers and replace any that are damaged for proper fit
• Handle edges carefully and reassemble components securely; test rack movement after installation

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This gutter heating heating element helps prevent ice dams and keeps gutters and downspouts clear so melting water can drain away. It's a direct-replacement service part used in compatible Bosch systems to reduce ice buildup. What it does

• Provides localized heat to gutters and downspouts to help melt snow and ice
• Helps reduce ice dam formation that can cause overflow or water backup
• Restores proper drainage when frozen buildup is the cause of gutter blockage
• Commonly used when you see visible ice on gutters, water backing up, or slow roof drainage

• One gutter heating element assembly

• Intended for installation by an experienced DIYer familiar with appliance electrical work
• Disconnect power to the appliance and associated circuits before servicing
• Follow OEM wiring and mounting instructions; use appropriate outdoor-rated wiring and fasteners
• Inspect connections and weather seals after installation and test operation before finalizing

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This temperature limiter safeguards the evaporator defrost heater by opening the circuit if temperatures rise too high. Replacing a failed limiter restores defrost safety and helps prevent frost buildup and inconsistent cooling performance.

• Protects the defrost circuit by cutting power to the evaporator heater when an over-temperature condition is detected
• An open/failed limiter prevents the heater from energizing, causing frost accumulation on the evaporator and warm refrigerator temps
• Designed to be installed in the original location and orientation for accurate temperature sensing

• Disconnect power before servicing; evaporator fins and sheet metal are sharp—use cut-resistant gloves
• Access the evaporator compartment and note the limiter's original mounting and wire routing before removal
• Transfer any clips/insulation sleeves and reconnect wiring to the same terminals; do not bypass this safety device
• Reassemble, restore power, and monitor for normal defrost operation

This defrost heater warms the evaporator coil to melt frost and ice buildup so the refrigerator can maintain proper airflow and cooling performance. Replaces a failed heater to restore normal automatic defrost cycles. What it does:

• Generates heat at the evaporator during defrost cycles to remove accumulated frost and ice
• Helps restore airflow and consistent cooling when the evaporator is ice-covered
• Commonly replaced for symptoms like excessive frost/ice buildup, poor cooling, or frequent defrost cycling
• Works with the freezer's defrost control and thermostat to operate only during defrost events

• Disconnect power to the appliance before servicing to avoid electrical shock
• Verify the evaporator assembly and defrost thermostat/timer are accessible and in good condition before installation
• Handle the heater and evaporator fins carefully to avoid damage; replace any damaged clips or insulation as needed

This fixture is the OEM replacement mounting piece designed to secure internal components and restore proper alignment and support. It helps keep parts stable for reliable operation and reduces noise caused by loose hardware. What it does:

• Secures internal panels or components to the appliance frame to prevent movement
• Restores proper alignment to reduce rubbing, vibration, or rattling noises
• Provides the correct mounting point for linked components to operate as intended
• Replaces damaged or missing fixtures that can cause part instability or failure

• Recommended for users comfortable with basic disassembly; unplug the appliance before starting.
• Keep fasteners and surrounding parts organized during removal to ensure correct reassembly.
• Inspect mating surfaces for damage or wear; replace adjacent hardware if needed.

This insulating part is a direct-replacement insulation pad that restores the appliance's thermal protection and helps reduce heat transfer and noise. Use it to replace a worn, damaged, or missing insulation element. What it does:

• Provides thermal insulation to limit heat transfer to adjacent components and cabinet surfaces
• Dampens vibration and helps reduce operational noise
• Protects wiring and nearby components from excessive heat exposure
• Addresses symptoms such as visible torn/missing insulation, heat feeling on exterior panels, or increased noise

• Disconnect power (unplug or switch off breaker) and allow the appliance to cool before starting.
• Handle gently—insulation can be fragile; reattach using existing clips or fasteners as OEM specifies.
• Use basic hand tools; follow OEM placement and orientation for proper coverage.

This wire freezer basket provides a durable storage bin to organize frozen foods and maximize usable freezer space. It replaces a damaged or missing basket to restore proper storage and accessibility in compatible freezers. What it does:

• Holds and organizes frozen groceries to prevent loose items from shifting
• Slides or lifts out for easy loading, unloading, and cleaning
• Restores lost storage capacity when an original basket is cracked, bent, or missing
• Fits into the freezer compartment where a wire storage basket is required

• One wire freezer basket

• Install by sliding or setting basket into designated shelf rails or supports; no tools typically required
• Inspect mounting rails or supports for damage before installing; ensure basket seats securely
• Clean with mild soap and water; avoid abrasive cleaners that can damage coating

This sensor monitors operating conditions inside the appliance and reports to the control so cycles run correctly and safely. When the sensor fails, the control may receive inaccurate feedback, leading to irregular performance. What it does:

• Detects key conditions inside the appliance and sends a signal to the control
• Helps the control regulate heat and cycle progress
• Failure symptoms can include erratic cycle times, poor heating performance, or sensor-related error messages
• Can prevent the appliance from starting or completing a cycle if readings are out of range

• 1 sensor

• Disconnect power before servicing; shut off water supply if applicable
• Access the sensor and note wire orientation before removal
• Ensure any sealing surface is clean and the sensor is seated properly; check for leaks after reassembly where applicable
• Run a diagnostic or test cycle after installation to clear errors and verify operation

This insulating part provides thermal and electrical isolation between adjacent components to protect wiring and assemblies. It helps prevent heat transfer and electrical contact for safer, more reliable appliance operation. What it does:

• Separates metal parts and wiring to reduce risk of shorting or contact-related wear
• Helps limit heat transfer between hot components and sensitive parts
• Cushions and stabilizes small assemblies to reduce vibration-related damage
• Commonly replaced when the original insulator is cracked, melted, or missing

• One insulating part

• Always disconnect power to the appliance before starting any repair
• Verify correct orientation and seating; do not deform or pinch the insulator during installation
• Replace any damaged fasteners or clips and ensure wiring is routed away from heat sources

This connection piece is the small inline connector that joins internal hoses or water-path components inside your appliance. It restores a secure, sealed fit to help prevent leaks and maintain proper water flow during operation. What it does:

• Creates a tight, sealed connection between hoses or assemblies in the water path
• Helps resolve leaks or drips at a hose joint
• Replaces cracked, warped, or broken connector fittings
• Addresses fill/drain issues caused by a loose or leaking connection

• 1 connection piece

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Note hose routing/orientation and clamp positions before removal
• Push hoses fully onto fittings and secure with clamps; test for leaks after reassembly

A direct-replacement connection piece that restores a secure, watertight junction between the appliance and its inlet hose. Replaces worn or damaged connectors to help stop leaks and ensure reliable water flow into the unit. What it does:

• Provides a sealed connection between the inlet hose and the appliance to prevent leaks
• Maintains proper water flow to the appliance for normal fill and operation
• Addresses common symptoms like water pooling or dripping at the hose connection
• Useful when the original connector is cracked, warped, or otherwise failing

• One connection piece

• Turn off water supply and disconnect power before starting work
• Inspect mating surfaces and replace any worn seals or O-rings as needed
• Hand-thread carefully to avoid cross-threading; tighten securely but avoid overtightening

This replacement cover is a protective outer piece that helps keep internal components safe from moisture, dust and debris. It restores the original enclosure and helps reduce vibration and noise caused by damaged or missing covers. What it does

• Protects wiring, connectors and nearby components from moisture and contaminants
• Keeps small parts secured and helps prevent rubbing or vibration against moving components
• Helps stop visible rattling or scraping caused by a cracked or missing cover
• Useful when the original cover is cracked, warped, broken or otherwise damaged

• One replacement cover

• Disconnect power to the appliance before starting any repair
• Confirm orientation and clip locations before removing the old cover to avoid breaking fasteners
• Use gentle pressure to seat the cover; do not force broken clips—replace fasteners if needed

A replacement halogen oven lamp that restores interior lighting so you can check food without opening the door. Fits compatible Bosch ovens and provides bright, focused illumination for safer, easier cooking. What it does:

• Replaces a burned-out or dim oven light to improve interior visibility
• Helps you monitor baking and roasting without opening the oven door
• Resolves common symptoms like no light, flickering, or reduced brightness
• Designed for use in compatible oven light housings

• One halogen oven lamp

• Disconnect power to the appliance before replacing the lamp to avoid shock
• Allow the oven and old lamp to cool completely before handling
• Handle the new lamp with gloves or a clean cloth to avoid oils on the glass that can shorten life
• After installation, restore power and verify the light functions normally