Parts for Bosch B36IT70NNP/08: Drawers 1 Parts

This active carbon filter refreshes the air when your range hood is set to recirculate. Replace a saturated filter to restore effective odor reduction and maintain a more comfortable cooking space. What it does:

• Adsorbs cooking odors in recirculating operation
• Helps maintain fresher indoor air when venting back into the room
• Restores odor-removal performance when the old filter is saturated
• Typical signs it's time to replace: persistent cooking smells or diminished odor reduction

• One activated carbon filter

• Disconnect power to the hood before servicing
• Remove the metal grease filter(s) to access the charcoal filter
• Release the old filter from its clips/bayonet mount and install the new filter in the same orientation until it locks
• Charcoal filters are not washable; replace when saturated

• For hoods configured for recirculation; not used when vented to the outdoors

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement rail restores smooth movement and proper alignment for the dishwasher's upper rack so dishes load and unload easily. Use it when the rack scrapes, sticks, falls off the track, or does not slide smoothly. What it does

• Guides and supports the upper rack so it slides in and out evenly
• Replaces worn, bent, or broken rails that cause binding or misalignment
• Stops the rack from falling off the track or catching while moving
• Reduces scraping, grinding, or rough movement during rack operation

• One rail

• Basic hand tools required; remove the rack to access and replace the rail
• Follow OEM instructions for proper orientation and secure attachment
• Disconnect power to the appliance before attempting repairs if needed for access
• If damaged mounting clips or rollers are present, replace them as well

This replacement glass turntable plate restores a flat, stable cooking surface so food rotates and heats more evenly in compatible Bosch microwaves. Durable tempered glass helps contain spills and makes cleanup simple. What it does:

• Provides the rotating surface that carries dishes while the microwave turntable motor turns
• Promotes even cooking and reheating by keeping food centered and moving
• Replaces chipped, cracked, or missing glass that can cause wobbling or noisy operation
• Helps contain spills so messes are easier to wipe away

• Handle carefully; glass edges can be sharp if damaged
• Unplug or disconnect power to the microwave before removing or installing parts
• Align plate over the roller/drive support so the drive nub seats into the center hub
• Do not use if cracked or chipped — replace to avoid uneven rotation or further damage

This rack rail guides the lower dishwasher rack smoothly in and out, restoring proper rack movement and alignment for reliable loading and unloading. It replaces a worn, bent, or broken slide rail to reduce sticking and mis-tracking. What it does:

• Guides and supports the lower dish rack so it slides smoothly on the dishwasher track
• Replaces damaged or bent rail that causes the rack to stick, bind, or wobble
• Helps keep the rack aligned to prevent dishes from tipping or not seating properly
• Works with the rack rollers/tires and end stops to ensure consistent movement

• One rack rail

• Intended to be installed by someone comfortable with basic appliance repairs; disconnect power and water before beginning
• Remove the lower rack and any end caps/fasteners holding the old rail; align and snap or fasten the new rail per the OEM layout
• Keep small clips and screws secured during reassembly; test rack movement before returning the dishwasher to service

This small replacement clip secures appliance components to restore proper fit and stop loose parts from shifting during use. It's a direct-fit replacement designed to hold trim, panels, or assemblies where the original clip failed. What it does:

• Holds small panels, trim pieces, or assemblies in place to prevent rattling and misalignment
• Restores the original mounting point so doors, drawers, or covers sit flush
• Helps keep wiring, hoses, or small parts secured and routed correctly
• Stops intermittent contact that can cause noise or wear on adjacent components

• One replacement clip

• Disconnect power and water before servicing
• Verify clip location and orientation against the existing fastener before removal
• Remove broken clip and press new clip into the same mounting slot; some clips may snap or slide into place

This cover is a protective access panel that shields internal components and wiring from debris and moisture, helping maintain safe operation and simplify service access. What it does:

• Protects electrical connections and internal components from dirt and accidental contact
• Helps reduce noise by covering moving parts and openings
• Keeps moisture and food particles away from sensitive areas
• Provides a clean, finished appearance to the appliance interior

• One cover

• Unplug power and shut off water supply before starting
• Use appropriate tools to remove fasteners; keep track of screws and clips for reassembly
• Inspect surrounding seals and wiring while panel is removed; replace damaged parts as needed
• Do not force or bend the cover; replace if cracked or warped to ensure proper fit

A small retaining clip that fastens a component or panel in place inside your appliance. Replacing a broken or missing clip restores a secure fit so parts stay aligned and don't rattle during operation.

• Holds a mating piece, trim, or cover securely in position
• Helps prevent vibration-related looseness, gaps, and rattling
• Restores proper fit when the original clip is cracked, bent, or missing
• Common signs: loose or wobbly part, misalignment, visible damaged/missing clip

• Disconnect power; shut off water or gas supply
• Note the original clip's orientation; take a photo before removal
• Use needle-nose pliers to release/install; avoid prying on brittle plastics
• Press until fully seated and verify secure engagement before reassembly

The Freezer Retainer Clip is an OEM part for Bosch refrigerators. It is designed to secure items within the freezer, preventing them from shifting or falling out when the door is opened.

Causes of a bad retainer clip can include regular wear and tear, accidental breakage, or exposure to extreme temperatures.

Symptoms of a bad Freezer Retainer Clip include:

• Items in the freezer falling or shifting easily
• The clip not staying in place or fitting securely
• Visible cracks or damage to the clip
• Difficulty in properly organizing freezer contents

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This small replacement clip secures a hose, wire or small appliance assembly so parts stay in place and operate reliably. It restores proper routing and prevents rubbing or disconnection that can cause noise or leaks. What it does:

• Holds hoses, wiring or small components in the correct position to prevent chafing or strain
• Keeps parts seated during normal use and vibration
• Helps maintain proper flow paths and clearances to avoid interference
• Reduces rattling or movement that can lead to wear or disconnection

• One replacement clip

• Designed for straightforward snap-in replacement; no special tools typically required
• Power off and disconnect the appliance before starting any repair
• Verify orientation and fit before fully seating the clip to avoid damage
• If the original clip is brittle or broken, inspect adjacent parts for wear and replace as needed

Note: Kit of 2 rails

This replacement fixture restores the original mounting support used in select Bosch appliances, helping secure internal components for reliable operation and fit. Use this part when worn or damaged mounting hardware causes loose or misaligned assemblies. What it does:

• Provides a secure mounting point to hold internal appliance components in place
• Prevents movement or vibration that can cause noise, rubbing, or improper operation
• Restores correct alignment of the attached assembly for proper function
• Helps stop intermittent contact or mechanical binding caused by a broken fixture

• One replacement fixture

• Disconnect power and water before starting any repair
• Follow OEM disassembly steps for access; some panels or components may need to be removed
• Use proper tools and avoid over-tightening fasteners to prevent damage

This glass plate is the microwave turntable that supports and rotates dishes for even cooking. It replaces a cracked, chipped or missing turntable to restore stable, even heating. What it does

• Provides a stable surface for plates and bowls while the microwave rotates them
• Helps food cook evenly by enabling proper rotation during operation
• Replaces broken, chipped or missing glass that can cause wobbling or poor contact
• Restores proper alignment so the drive coupling can engage the plate

• One glass turntable plate

• Unplug or disconnect power to the microwave before servicing
• Handle with care to avoid chipping; support the plate from beneath when removing or installing
• Do not use a cracked or chipped plate; replace immediately to avoid injury or further damage