Parts for Maytag MVWX655DW2: Console And Water Inlet Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Dispenser Housing is an OEM part for Whirlpool washing machines. It is the outer casing that surrounds and protects the internal dispenser mechanism and water inlet valves. It also features openings to allow for the dispensing of laundry detergent and other additives at just the right times during the wash cycle.

Causes of a bad dispenser housing can include cracks, breaks, or other physical damages due to impact or stress over time. The housing opening/closing mechanism may become loose or misaligned.

Symptoms of a bad dispenser housing include:

• Difficulty opening or closing the detergent tray 
• Leaks or premature dispensing from a cracked or damaged housing
• The detergent tray not sitting securely in place
• Inability to fully contain and protect internal dispenser parts

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness routes electrical connections to the appliance's control and components, restoring reliable power flow and signal paths for proper operation. Use it to replace a damaged or worn harness causing intermittent or failed electrical connections. What it does:

• Reconnects power and control signals between the main control and components
• Replaces frayed, burnt, or broken wiring that can cause intermittent operation
• Restores operation when lights, motors or controls lose power or respond inconsistently
• Helps eliminate arcing or exposed wires that create safety hazards

• Disconnect power to the appliance before starting any repair
• Handle connectors and wires gently; match connector shapes and routing during installation
• Secure routing away from heat sources and moving parts to prevent wear

The Cold Water Inlet Valve is an OEM replacement part specific to Whirlpool washing machines. It is responsible for allowing cold water to enter the wash tub during specific cycles. 

Symptoms of a bad cold water inlet valve include:

• Inability to select cold water cycles 
• No cold water entering the tub even when valve is called for
• Water leaks around the valve area
• High water usage as the valve fails to close fully

Causes can be mineral buildup over time restricting water flow, or mechanical failure of internal components like seals or diaphragms. Replacing the inlet valve prevents further issues like inconsistent fill levels due to too much or too little water entering the tub.

This OEM Whirlpool replacement valve provides a tight seal and reliable water control. It restores cold water functions and is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hot Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of hot water into the washing machine during the wash cycle, ensuring that the machine receives the correct amount of hot water for optimal cleaning performance.

Common causes of a bad inlet valve include wear and tear over time, clogging from mineral deposits or debris, and electrical failures that prevent the valve from opening or closing properly.

Symptoms of a bad Hot Water Inlet Valve include:

• The washing machine not filling with hot water
• Water leaking from the valve or connections
• The machine filling slowly or not at all
• Error codes related to water flow issues

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

• Rear panel detaching from frame opening gaps
• Increased noise and vibrations from a compromised seal  
• Stress on other connections from improper mounting points
• Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

• Loose console assembly that is not securely fastened  
• Misaligned or dangling controls that do not sit flush
• Dislodged console at risk of detaching from housing
• Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This cycle selector switch lets you choose appliance cycles from the control panel so your washer or dryer runs the setting you pick. Replaces a worn or unresponsive cycle control to restore reliable cycle selection. What it does:

• Selects the user-chosen wash or dry cycle from the control panel
• Sends the selected cycle signal to the appliance control/timer
• Commonly replaces units that feel loose, fail to click, or do not change cycles reliably
• Helps resolve symptoms like unresponsive cycle changes or intermittent cycle selection

• One cycle selector switch

• Disconnect power (unplug or turn off breaker) before starting any repair
• Replacement typically requires removing the control panel or console; keep fasteners organized
• Handle with care to avoid damage to wiring harness or control board connections

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement power cord restores the electrical connection that feeds your appliance, allowing it to receive household power and operate safely. Use it to replace a damaged or worn cord for reliable performance. What it does:

• Provides the main electrical connection between the appliance and your home power supply
• Restores power when a damaged or frayed cord causes no power or intermittent operation
• Helps prevent arcing or overheating associated with cracked insulation or loose connections
• Can resolve problems like tripped breakers or visible cord damage that affect appliance operation

• Disconnect the appliance from power before starting any work; lock out or unplug at the source
• Route and secure the cord per the appliance wiring diagram; avoid pinching or sharp bends

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Knob is an OEM replacement part for Whirlpool dryers. This part is what you turn to select different drying cycles, temperatures, or settings on your machine. The knob is designed to fit onto the dryer's control panel and is used for manual operation of the appliance.

Symptoms of a bad Knob include:

• Difficulty in turning or setting the knob
• The knob slipping or coming off the control panel
• Inability to select or change cycles
• Visible cracks or damage to the knob itself
• Causes for a deteriorating knob can be frequent use, which may lead to wear and tear, or accidental damage from impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement control knob restores smooth, reliable turning on your appliance's control panel so you can select settings accurately again. It's designed to slide onto the control shaft and provide a secure, easy-grip interface. What it does

• Attaches to the control shaft to let you select settings
• Replaces cracked, stripped, or missing knobs
• Helps ensure the switch or valve engages properly when turned
• Improves grip and appearance on the front panel

• 1 control knob

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the shaft flats/splines and press straight on without forcing
• Test operation to ensure the knob fully engages the control

The Harness Wiring is an OEM part for Whirlpool washing machines. It comprises the bundled electrical wires and connectors that power internal components and circuits within the machine.

Causes of a bad harness and wiring can include cuts, cracks, or fraying of insulating casings over time, corroded connectors from moisture exposure, or wire fatigue from continuous bending during operation.

Causes of a bad harness wiring include: 

• Failure or intermittent operation of components due to broken circuits  
• Arcing, sparking, or burning smells due to exposed or shorted wires
• Restricted access to internal parts due to tangled or bound wires

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

This electronic control panel is the user interface for select electric ranges and ovens, restoring access to the timer, bake/broil settings, and display. It replaces a cracked, unresponsive, or non-displaying front control surface to regain normal oven control. What it does:

• Houses the touchpad/buttons and display to send commands to the oven control board
• Replaces faded, cracked, or damaged front control surfaces and keypads
• Helps address unresponsive buttons, missing numbers/segments in the display, or intermittent control behavior
• Interfaces with the main electronic control so bake, broil, timers, and clock functions operate properly

• Disconnect power to the appliance before starting any service to avoid shock hazard
• Access typically requires removing the oven/range top or back panel
• Handle glass/display areas carefully to avoid scratches or damage during installation

This cycle selector switch controls the washer's cycle selection, letting the timer and controls know which wash program to run. Replacing a worn switch restores reliable cycle selection and predictable machine behavior. What it does

• Selects the active wash cycle and sends the selection signal to the timer/control assembly
• Ensures the washer follows the chosen program (wash, rinse, spin) in the correct sequence
• Common symptoms of a failing switch: washer won't change cycles, cycle knob feels loose or spins freely, machine starts the wrong cycle, or no response when selecting a cycle
• Matches original function and mounting for direct replacement when this exact part is specified

• One cycle selector switch

• Disconnect power (unplug or switch off breaker) before starting any work
• Access typically requires removing the console or control panel—keep track of screws and fasteners
• Note wiring locations or take a photo before disconnecting connectors to ensure correct reassembly

The Cycle Control Switch is an OEM part for Whirlpool washing machines. It acts as the selector switch for different wash cycles like normal, heavy duty, delicate, and spin options. 

Causes of a bad Cycle Control Switch often include general wear and tear over years of use. Harsh chemical or liquid exposure can degrade electronic circuits inside the switch. Physical damage from impact may also cause components to malfunction.

Symptoms of a bad Cycle Control Switch include:

• Inability to select desired cycles  
• Washer failing to start or operating improperly
• Repeatedly defaulting to the same cycle despite input changes
• Unresponsive or intermittent switch movement between positions

This OEM replacement switch is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Dispenser Drawer is an OEM part for Whirlpool washing machines. It is responsible for holding and dispensing the appropriate amounts of detergent, fabric softener, or other laundry additives during the wash cycle.

Causes of a bad dispenser drawer can include clogging or buildup of residue, damage to the drawer or its components due to impact or excessive force, or malfunctioning mechanisms that control the dispensing process.

Symptoms of a bad dispenser drawer may include:

• Inadequate or improper dispensing of detergent or additives
• Leakage or spills from the dispenser area
• The drawer not opening or closing smoothly
• Visible cracks or damage to the drawer itself

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement wire harness routes power and control signals between the appliance's electrical components to restore reliable operation and proper connections. It replaces a damaged or worn harness to help stop intermittent power loss or component failures. What it does:

• Provides factory-style wiring connections for controls, motors, sensors and switches
• Restores interrupted circuits that can cause intermittent or no operation of affected components
• Replaces burnt, frayed or broken wiring that can cause arcing or poor contact
• Ensures correct routing and connector fit to prevent chafing and shorting

• Disconnect power to the appliance before starting any repair; verify power is off
• Compare the new harness to the old one for connector type and routing before installing
• Route harness to avoid sharp edges and moving parts; secure with existing clips or ties
• If connectors are damaged or corroded, replace them; do not use the appliance with exposed or repaired wiring

This replacement nut secures appliance parts and hardware to keep assemblies stable and prevent loose connections. It's a simple, direct replacement for worn or missing fastening hardware to restore proper fit and reduce vibration. What it does:

• Fastens mounting studs, brackets or panels to hold components in place
• Restores secure mechanical connections that can loosen over time
• Helps eliminate rattling, vibration and misaligned panels caused by missing or stripped hardware
• Provides a straightforward, durable replacement for corroded or damaged nuts

• Disconnect power to the appliance before beginning any repair
• Use the correct-size wrench or socket; ensure threads engage smoothly before tightening
• Tighten until snug—avoid overtightening that can strip threads or damage components
• Inspect mating threads and replace any damaged studs or hardware for a reliable repair

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.