Parts for Ge JBP77DM2BB: 01 - Control Panel Parts

A trim and bracket assembly that secures and finishes the cooktop edge, restoring a clean appearance and proper fit. Replaces damaged or loose trim to stop gaps and improve stability at the cooktop perimeter. What it does:

• Provides the decorative edge trim and mounting bracket that holds the cooktop finish in place
• Restores correct alignment and reduces gaps where spills or debris can collect
• Helps stabilize adjacent panels so controls and surfaces sit flush
• Commonly replaced when trim is bent, broken, or loose after impacts or wear

• High-level replacement; basic hand tools required and access to underside of cooktop or range top
• Disconnect power (and gas if applicable) and follow OEM safety instructions before starting work
• Keep screws and small parts organized during removal to ensure correct reassembly

This trim and bracket assembly secures the appliance trim/bezel for a clean finished appearance and proper panel alignment. It restores a flush fit and prevents loose or sagging trim pieces. What it does

• Holds the decorative trim/bezel in place and supports nearby panels
• Keeps trim aligned to eliminate gaps and rattling during operation
• Replaces bent, cracked or missing bracketry that prevents a proper fit
• Helps maintain proper airflow clearances around the trim area

• One trim and bracket assembly as shown

• Disconnect power to the appliance before starting work
• Basic hand tools required; brackets typically fasten with screws accessible from the front or inside the cabinet/panel
• Handle carefully to avoid scratching the finish; verify fit before final tightening
• Follow OEM service instructions for disassembly/reassembly and torque recommendations

Right side endcap plate for your range. Replaces cracked, broken, or missing endcaps. This black cosmetic trim piece covers the side panel edge.

Replacement endcap for your range. This plastic or metal trim piece covers the end of the control panel or cooktop edge. Order a new one if yours is cracked or missing.

Replace your range's damaged or missing endcap with this direct-fit part. Restores the finished appearance of your cooktop edges when cracked or worn.

Fixes burner stuck on, no low heat, or burner not heating. Controls temperature levels on electric range surface burners. Moderate DIY repair.

Burner stays on high or won't turn off completely? This infinite control switch regulates surface burner heat. Simple 10-minute DIY fix with video guide.

Fixes burner stuck on, no low heat, or burner not heating. Controls temperature levels on electric range surface burners. Moderate DIY repair.

Burner won't turn off or stays on high? This range surface element switch controls heat output. Easy DIY repair—most install in 5-10 minutes.

White range control knob assembly for burner or oven temperature control. Replaces cracked, broken, or missing knobs on your cooktop or range.

Replace your range's control knob if it's cracked, broken, or missing. This knob installs on the control panel to operate burners or oven settings.

White control knob for electric ranges and cooktops. Replaces broken, cracked, or missing knobs on burner controls. Direct-fit replacement part.

Replace your range pilot indicator light when it stays on, flickers, or won't illuminate. Signals when cooktop elements are hot for safety. Verify fit by model.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

Covers the control panel lamp opening to diffuse light and protect from debris. Replace if broken, cracked, or missing to restore clear indicator visibility.

Indicator light lens covers and diffuses the panel light on your range or oven. Replace when cracked, discolored, or missing to restore visibility.

Decorative nameplate badge for oven and range front panels. Replaces missing, worn, or damaged emblems to restore factory appearance. Includes adhesive.

This hinge pin secures the rangetop to the cooktop assembly, providing a reliable pivot point for lifting and lowering the top. It restores proper alignment and stable movement for safe, everyday use. What it does

• Replaces a worn or damaged hinge pin that can cause the rangetop to wobble, stick, or sit unevenly.
• Restores smooth pivot action when opening or closing the cooktop/top.
• Helps maintain proper alignment between the rangetop and the range frame to prevent binding.
• Works with the original hinge components to ensure a secure, stable connection.

• One hinge pin for the rangetop.

• Basic hand tools required; follow the range manufacturer's disassembly steps.
• Disconnect power supply and gas and ensure the appliance is cool before beginning work.
• Handle edges and springs cautiously; support the rangetop during removal/installation to prevent injury or damage.

Black mounting screw for dishwashers and ranges. Replaces lost, stripped, or damaged screws during appliance repair or panel reinstallation. 8-18 x 5/16 inch.

White mounting screw for dishwasher installation and assembly. Replaces lost, stripped, or damaged screws. 8-18 x 5/16 inch fastener for secure fit.

Mounting screw for securing range components and panels. Replace if stripped, rusted, missing, or broken to properly fasten parts during repairs.

Mounting screw secures panels, trim, and internal components in ranges and ovens. Replace if missing, stripped, or damaged to restore proper fit.

Mounting screw secures range components and panels. Replace if screw is stripped, missing, or damaged during appliance repair or maintenance work.

Black hex washer screw for securing range components like door trim, control panels, and internal brackets. Replace missing or stripped screws during repairs.

Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.

Silicon controlled rectifier for cooktop power control. Includes 8-32 mounting screw. Replace if damaged, corroded, or missing to restore proper installation.

Silicon controlled rectifier for cooktop power control. Includes 8-32 mounting screw. Replace if damaged, corroded, or missing to restore proper installation.