Parts for Kenmore 417.48106700 (41748106700, 417 48106700): Control Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Washer won't start, stops mid-cycle, or displays error codes? The main control board manages all cycle functions. Moderate DIY repair, 30-45 minutes.

Replace your washer's control knob if the original is cracked, broken, or missing. This knob attaches to the control panel for cycle selection.

This small pin secures the program selection knob to the dryer's control panel shaft. Replace if the control knob spins freely without changing settings or falls off the control panel.

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

Fix a washer that won't fill, overfills, or leaks when idle by replacing the water inlet valve. Most DIYers complete this repair in 15-60 minutes.

Connects the detergent dispenser to the wash tub in your washer. Replace if cracked, leaking, or causing water damage to other components during cycles.

Secures hoses to fittings, preventing leaks in water and drain lines. Replace when connections loosen or leaks appear. Verify fit with your model number.

Rubber O-ring seal prevents water leaks at hose connections and fittings. Replace when worn or cracked to restore tight seal and stop dripping. Verify fit.

This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.

• Fastens components to frames, brackets, and covers
• Replaces missing, damaged, or rusted screws
• Helps reduce looseness, vibration, and rattling noises
• Restores proper alignment of panels and assemblies

• Disconnect power before servicing; shut off gas/water if applicable
• Start the screw by hand to avoid cross-threading; use the proper driver
• Tighten snugly—do not overtighten to prevent stripping metal or plastic

Fix a broken or missing detergent dispenser cover that's cracked or won't guide proper detergent placement. Simple 5-minute replacement repair.

Detergent drawer broken, cracked, or won't open? This drawer holds and dispenses detergent during wash cycles. Simple snap-in replacement, no tools needed.

This small spring provides tension for the door latch or dispenser drawer latch mechanism on a front-load washer. It ensures the latch engages and holds securely during operation. Replace this spring if the door or dispenser drawer no longer latches properly, pops open during a cycle, or the latch feels loose and does not click into place.

This is a black plastic latch that secures the detergent dispenser drawer on a front-load washing machine. It keeps the dispenser drawer firmly closed during wash cycles to prevent leaks and ensure proper dispensing of detergent and fabric softener. Replace this latch if the dispenser drawer won't stay closed, pops open during a cycle, or if the latch mechanism is cracked or broken.

Fix your washer dispenser drawer issues with this frame component. Supports drawer assembly operation and magnet placement. Direct-fit part for repair.

Replacement washer frame assembly that supports and houses internal components. Needed when the original frame is cracked, damaged, or structurally compromised.

This is the complete detergent dispenser drawer assembly for a front-load or top-load washing machine. It holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle. Replace this assembly if the dispenser drawer is cracked, if detergent is not dispensing properly, or if residue builds up and cannot be cleaned out.

This 4-foot rubber fill hose replaces the flexible water fill line that supplies water to the ice maker/dispensing system. It restores a secure, leak-resistant path for water so the ice maker can fill properly. What it does:

• Carries water from the household supply to the ice maker/fill cup
• Replaces cracked, brittle, or collapsed tubing that causes leaks or poor fill
• Helps stop intermittent or continuous water leaks at the fill connection
• Restores proper water delivery so ice production and dispenser filling work normally

• Turn off the water supply and unplug the appliance before replacing the hose
• Remove old hose and hose clamps; install new hose fully over fittings and secure with clamps
• Check all connections for leaks after restoring water and power
• Do not kink or sharply bend the hose; route to avoid rubbing on sharp edges

Metal sheet-metal screw secures panels, brackets, and internal components. Replace when missing, stripped, or damaged to restore proper fit.

Seals hot and cold water connections to your washer's dispenser. Replace if you notice leaking at the inlet assembly. Confirm fit with your model number.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.