Parts for Viking Range VGRC48: Control / Rack Assembly Parts

Replace your oven indicator light when it fails, flickers, or stays on. Restores clear operation status on your control panel. Verify fit with your model.

Control panel not responding or buttons failing on your gas range? This replacement panel restores full function. Moderate difficulty repair.

The range knob bezel is the decorative ring that surrounds control knobs on your range's front panel. Replace this part when it becomes cracked, discolored, or loose, affecting the appearance and proper seating of control knobs.

Replace your oven indicator light when it fails, flickers, or stays on. Restores clear operation status on your control panel. Verify fit with your model.

Oven won't hold set temperature or heats incorrectly? The thermostat regulates oven heat. Moderate DIY repair taking under an hour with basic tools.

Replacement burner control knob for gas ranges and cooktops. Installs on the control panel to operate burner valves. Needed when original is cracked or missing.

White burner control knob for gas range stovetop. Replaces cracked, broken, or missing knobs that control burner flame settings and ignition.

This is a top burner knob that is used on oven ranges that were manufactured prior to 2003. A burner knob is what the user turns to adjust the temperature on the burner. This part is manufactured out of a black plastic material and has white lettering on it.A new top burner knob may be needed if the original is cracked, broken, or damaged in any way. If any of the letters wear off of the knob, the user may wish to replace it. If the back of the knob is stripped out and it just spins without activating the range, then it will need to be replaced.This top burner knob is a genuine Viking part and is an OEM part sourced directly from the manufacturer. It is sold individually. This particular top burner knob is compatible with oven ranges that are manufactured by the Viking brand.

Fix imprecise oven temperatures or a loose control knob with this thermostat knob replacement. Restores accurate heat selection on gas ranges. Simple DIY fix.

This toggle switch kit replaces a worn or damaged control toggle to restore reliable on/off control for the affected function. It's a direct-fit replacement designed to match the original switch's form and mounting. What it does

• Replaces a broken, loose, or non-responsive toggle switch that prevents proper control
• Restores reliable electrical contact and user control for the associated function
• Stops intermittent operation, arcing, or loss of control caused by a failed switch
• Useful when the toggle lever is bent, loose, or when internal contacts have failed

• Disconnect power (and gas if applicable) before beginning any service
• Access usually requires removing the control panel or console; keep track of screws and trim
• Verify electrical connections and orientation match the original before final assembly
• If wiring shows heat or corrosion damage, replace wiring

Broiler pan for gas ranges and wall ovens. Replaces cracked, warped, or missing pans. Installs in broiler compartment for high-heat cooking and roasting.

This 1/2" x 1/4" rubber bumper cushions contact points to reduce noise and prevent damage on appliance doors, drawers, and panels. It restores proper cushioning for smoother, quieter operation and helps maintain a snug fit. What it does:

• Absorbs shock where panels or doors meet to reduce rattling and clapping noises
• Prevents metal-to-metal contact that can cause chipping, scratching, or wear
• Helps doors and drawers close more evenly by restoring original spacing
• Commonly used where small, press-fit bumpers have worn, flattened, or fallen off

• One 1/2" x 1/4" rubber bumper

• Press-fit replacement; remove old bumper and press new bumper into the same hole until flush
• No special tools required; use a flat pick or small screwdriver to remove old bumper if needed
• Avoid installing on hot surfaces or near heating elements; let appliance cool before service
• Replace matching bumpers in the same area if others show wear for even performance

70-inch stainless steel flexible gas supply tubing for gas ranges. Connects your range to the gas line. Replace if kinked, cracked, or damaged.

This tubing connects to the bake shutoff or safety valve in a gas oven, routing gas to the bake burner assembly. It ensures proper gas flow to the oven burner when the bake cycle is activated. Replace this tubing if you detect a gas smell near the oven, notice uneven heating, or if the oven fails to ignite due to a compromised gas line connection.

This is the wire assembly that connects the spark module to the rear burner ignitor on a gas range. It carries the electrical pulse needed to create a spark that ignites the gas at the burner. Replace this wire if the rear burner clicks but does not light, produces no spark at all, or if the wire insulation is damaged or burned.

This wire connects the spark module to the grill or griddle burner ignitor on a gas range. It carries the electrical spark signal needed to ignite the burner. Replace this wire if your grill or griddle burner clicks but won't ignite, or if you notice intermittent ignition failure due to a damaged or corroded wire.