Parts for Viking Range VGRC48: Gas / Electrical Components Parts

Light bulb socket assembly includes: Light bulb socket, light bulb and light lens.

Fix uneven baking or convection not working in your gas range with this convection fan assembly. Moderate DIY repair restores proper air circulation.

Fix uneven baking or no convection heating with this gas range convection fan box assembly. Moderately difficult repair for most home DIYers.

Protective cover for the convection fan in gas ranges and wall ovens. Replace if cracked, broken, or missing to properly shield the fan assembly.

If your gas range convection fan is loose or rattling, this mounting nut secures the fan blade to the motor shaft. Quick 10-minute repair for models VGIS30.

Fix uneven baking or convection not working in your gas range with this convection fan assembly. Moderate DIY repair restores proper air circulation.

Oven won't heat but igniter glows? This flat hot surface ignitor restores reliable gas ignition. DIY repair takes 45 minutes with basic tools.

Oven not heating or heating unevenly? A faulty oven burner is often the cause. This gas range burner generates the flame that heats your oven chamber.

Fix uneven heating or burner flame issues with this gas range infrared burner orifice. Precision gas flow control part for professional ranges.

Infrared burner won't heat properly or flame is uneven? This gas orifice controls gas flow to restore correct flame size and consistent searing performance.

Fix uneven flames or weak burner output with new burner tubing. This gas line connects your range's burner to the gas supply. Moderate DIY repair.

Fix weak or uneven broiling with this infrared broil burner kit. Restores high-heat searing performance. Moderate difficulty, 1-2 hour installation.

This is an orifice hood for the bake burner on a natural gas range, sized at #46. It regulates the flow of gas to the bake burner to ensure proper flame size and efficient combustion. Replace this orifice hood if the bake burner produces an uneven flame, yellow flame tips, or if you are converting the range and need the correct orifice sizing.

This is a gas burner tubing assembly designed for the left-hand oven section of a 36-inch range. It carries gas from the manifold or valve to the oven burner for proper ignition and heat distribution. Replace this tubing if you notice gas odor near the oven, uneven heating, or if the oven burner fails to ignite consistently.

This is a burner tubing section designed for the right-hand oven of a 36-inch gas range. It routes gas from the manifold or valve to the oven burner, ensuring proper fuel delivery for baking and broiling. Replace this tubing if you detect a gas smell near the oven, experience uneven heating, or notice visible corrosion, kinks, or damage to the tube.

This 1/2" x 1/4" rubber bumper cushions contact points to reduce noise and prevent damage on appliance doors, drawers, and panels. It restores proper cushioning for smoother, quieter operation and helps maintain a snug fit. What it does:

• Absorbs shock where panels or doors meet to reduce rattling and clapping noises
• Prevents metal-to-metal contact that can cause chipping, scratching, or wear
• Helps doors and drawers close more evenly by restoring original spacing
• Commonly used where small, press-fit bumpers have worn, flattened, or fallen off

• One 1/2" x 1/4" rubber bumper

• Press-fit replacement; remove old bumper and press new bumper into the same hole until flush
• No special tools required; use a flat pick or small screwdriver to remove old bumper if needed
• Avoid installing on hot surfaces or near heating elements; let appliance cool before service
• Replace matching bumpers in the same area if others show wear for even performance

70-inch stainless steel flexible gas supply tubing for gas ranges. Connects your range to the gas line. Replace if kinked, cracked, or damaged.

This is the wire assembly that connects the spark module to the rear burner ignitor on a gas range. It carries the electrical pulse needed to create a spark that ignites the gas at the burner. Replace this wire if the rear burner clicks but does not light, produces no spark at all, or if the wire insulation is damaged or burned.

This wire connects the spark module to the grill or griddle burner ignitor on a gas range. It carries the electrical spark signal needed to ignite the burner. Replace this wire if your grill or griddle burner clicks but won't ignite, or if you notice intermittent ignition failure due to a damaged or corroded wire.

This tubing connects to the bake shutoff or safety valve in a gas oven, routing gas to the bake burner assembly. It ensures proper gas flow to the oven burner when the bake cycle is activated. Replace this tubing if you detect a gas smell near the oven, notice uneven heating, or if the oven fails to ignite due to a compromised gas line connection.