Parts for Whirlpool WTW4850BW2: 03 - Controls And Water Inlet Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This is a D-shaped knob insert or spring clip that fits inside a control knob and connects it to the control shaft on the dryer's front panel. It ensures the knob grips the shaft properly so you can turn the timer or selector. Replace this insert if your control knob spins freely without engaging the shaft or if the knob feels loose and won't stay in position.

This is the left-side end cap that attaches to the dryer's control panel, providing a finished appearance on the edge of the console. It snaps or screws into place and helps hold the control panel assembly together. Replace this end cap if it is cracked, broken, or missing, which can leave the control panel edges exposed and unsightly.

This is a white plastic end cap that attaches to the right side of the dryer's control panel console. It provides a finished appearance and helps secure the control panel assembly in place. Replace this end cap if it is cracked, broken, or missing, which can leave the edges of the control panel exposed and cause the console to feel loose.

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

• Loose console assembly that is not securely fastened  
• Misaligned or dangling controls that do not sit flush
• Dislodged console at risk of detaching from housing
• Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board operates the oven/range user interface and internal control functions so the appliance responds to settings and heats as commanded. Replaces a failed or damaged main control for reliable operation. What it does:

• Receives user inputs and runs oven/range cycles, temperature regulation, and timed functions
• Restores control panel responsiveness when display is blank or controls are unresponsive
• Can resolve intermittent operation, oven not heating, or inability to start cycles when board is faulty
• Works with related sensors and relays to manage heating elements and safety features

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before starting—risk of electric shock
• Handle the board carefully to avoid static damage; transfer any bracket, wire harness, or thermal protector from the old board if required
• Verify the part number on the replacement matches the original board before installation

Covers the back of your laundry center, protecting internal wiring and components. Replace if cracked, broken, or missing to restore a finished look.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Fix a washer that won't advance through cycles or gets stuck between wash and rinse. This cycle switch controls your wash sequence. DIY repair.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Restores electrical connection from wall outlet to your laundry center. Replace if original cord is damaged, burned, frayed, or has missing prongs.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.

Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads. 

Symptoms of a bad screw include:

• Loose or detached rear bulkhead allowing side-to-side play
• Excessive noise and shaking felt through the surrounding walls   
• Development of micro-cracks around screw holes over time
• Potential leak paths if holes are no longer sealed 

This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a black plastic control knob used on the dryer's control panel to select cycle settings or options. It attaches to a selector switch shaft and allows you to choose between different drying programs. Replace this knob if it is cracked, broken, or if the D-shaped shaft opening is worn out and the knob spins freely without engaging the switch.

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

Fix washer electrical failures with this wire harness. Resolves power issues, control panel malfunctions, and component failures caused by damaged wiring.

Fix a washer that won't fill, fills slowly, or won't stop filling. This water inlet valve controls water flow during wash cycles. 30-minute repair.

Fixes intermittent power loss or control failures. This main wire harness restores electrical connections between the control board and components.

Fix a stuck or unresponsive control button with this snap-in pushbutton. Restores tactile feedback to your washer's control panel. Simple snap-in install.

Control panel pushbutton for washers. Replaces cracked, broken, or missing pushbuttons on the control panel. Restores proper operation of controls.

Fix unresponsive or erratic cycle selection with this rotary encoder switch. Mounts behind the control knob to restore accurate cycle settings and indicators.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.