Craftsman Edger Parts

This choke temperature control gasket is an authentic OEM replacement part sourced directly from the manufacturer for use small engines that utilize a choke. The temperature control gasket helps to create a seal inside the choke that prevents air from seeping in or out of the choke. If the gasket is worn or damaged, air and contaminants could infiltrate the choke and cause the choke to fail. The choke temperature control gasket should be inspected and replaced if it is damaged. The choke uses a mixture of fuel and air to start the engine combustion process. If the choke temperature control gasket is not fully functioning, too much air could get in, and the ratio would not be optimal for the ignition process. If the engine is rough starting or starts and dies quickly, the choke's gaskets should be inspected and replaced as needed. Wear gloves when working on the choke and ensure that the spark plug is removed to prevent accidents.This choke temperature control gasket is sold as an individual part. It is designed for use in small engines that utilize a choke manufactured by MTD, Yard Machines, Yard Man, Cub Cadet, Husky, Troy-Bilt.

Carburetor assembly for walk-behind mowers and wheeled trimmers. Replaces cracked, damaged, or worn carburetors that affect fuel mixing and delivery.

This part is a carburetor gasket. A carburetor mixes fuel and air before delivering it to the engine. The carburetor gasket creates a seal between the carburetor and cylinder that ensures that air is where it's supposed to be.The carburetor gasket may need to be replaced if the seal is broken and it is allowing air in. If there is a slight leak, the operator may notice engine roughness when it's at idle. A larger leak will cause the engine to vibrate, misfire, or hesitate under acceleration. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD part and is an OEM part sourced directly from the manufacturer. It it is sold individually. This carburetor gasket is compatible with engines, lawnmowers, log splitters, and trimmers manufactured by MTD, Yard Machines, Yard-Man, Cub Cadet, Husky, and Troy-Bilt.

V-belt transfers power from engine to auger or drive system. Replace if worn, cracked, or slipping. Verify fit using your model number before ordering.

Drive belt transfers power from engine to wheels on self-propelled mowers and snow blowers. Replace if slipping, worn, or cracked. Verify fit by model number.

This replacement piston kit is designed to be used with many different types of handheld lawn and garden equipment. The pistons are important parts of the engine. The crankshaft powers the pistons, so they move up and down within the cylinder. The purpose of the pistons is to transfer the gas that expands within the cylinder. The pistons can begin to wear out over time, which means that they could fail, which will cause serious problems for engine performance. If there are issues with the piston, a replacement piston kit is essential to get the machine back up and running. When a piston goes bad, it will cause the engine power to decrease. In some cases, the engine might lose all power. Replacement will require pliers, a set of wrenches, and a screwdriver to complete. This high-quality piston kit replacement is a genuine OEM part. It is sold individually. The part can be used for pole pruners, edgers, leaf blowers, string trimmers, and hedge trimmers. Compatible brands include Weed Eater, Poulan, Poulan Pro, Husqvarna, and Craftsman.

This starter spring is a genuine OEM replacement part for chainsaws that operate using a starter rope. When an operator pulls the starter rope out, there is a pulley around which the rope then has to recoil. The starter spring maintains tension in the pulley so that the rope will naturally recoil. The starter spring also provides enough tension to prevent the operator from yanking the rope all the way out of the assembly. Through repeated use, and especially if an operator is rough on their appliance, the starter spring can loosen up and will no longer work as effectively. When this happens, the starter pulley will not recoil and the starter rope will hang loose from the appliance. Fortunately, switching out the starter spring is an easy repair that should only require a wrench and a pair of pliers. Be careful when pulling the old spring out. Although it isn't as tense as it once was, it still has the potential to snap back. This replacement starter spring is a high-quality part for Husqvarna, Poulan, and Weed Eater appliances, and as such, it is sourced from its original manufacturer. This part does not ship with any additional hardware.

Klik pin fastener secures wheels to tiller and snowblower assemblies. Replace if bent, broken, or missing to restore proper wheel attachment.

Handle knob for tillers and outdoor power equipment. Replaces cracked, broken, or missing knobs on control handles. Direct-fit replacement part.