Craftsman Lawn Mower Control Cable

This is a control cable designed for use with walk-behind lawnmowers. It's made of durable materials but includes small connectors at each end of the cable. The connections on the end are delicate and can wear out with regular use. When this occurs, the control cable will need to be replaced. This cable is important because it assists with controlling the speed of the blades while mowing the lawn. If it is broken, the lawnmower may not start or will not keep the appropriate speed.If the control cable is broken or worn out, it needs to be replaced. There is no need to use tools for the process, but wear work gloves for safety. Untwist the original control cable to remove it. Once it has been removed, the new component can be installed in its place.This control cable is designed to be compatible with lawnmowers manufactured by Craftsman and Cub Cadet. It is sold as a single cable. The cable is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine OEM replacement clutch cable for a lawn tractor with a mechanical clutch system. A mechanical clutch is a simple transmission system engaged when the operator pushes a lever. The clutch cable transfers energy from the motor and either engages or disengages the mower blade. The clutch is essentially a brake for the mower blade. This allows the operator to stop mowing without having to turn off their appliance. The clutch cable can tense up in colder climates and snap, or alternatively, it can lose tension over time and no longer provide enough force to engage the clutch. Should this happen, the operator will not be able to turn the mower blade off or on, depending on what position the clutch is in. To replace the clutch cable, detach the lower deck from the lawn mower and disassemble the old cable with a pair of pliers. Replace with a new part and reassemble the lower deck. This repair is easy and straightforward but be sure to not lose the clips that hold the lower deck in place. This replacement clutch cable is compatible with lawn mowers made by Husqvarna, Poulan, and Jonsered. It comes sourced from its original manufacturer and ships individually.

This control cable is a genuine Husqvarna part, sold individually. This control cable can be used as a replacement part for lawnmowers. This control cable creates a system so that when the control cable is held, the lawnmower starts and when the control cable is released, the lawnmower engine quickly shuts off in order to prevent possible damage through continued use.The control cable might have to be replaced if its connection to the engine is severed through clear, visible damage to the component. Punctures, rips, tears, and erosion to the cables can all cause the component to lose its functionality. If this occurs, the control cables should be removed and replaced by this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This control cable is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

The cable assembly is a replacement part for lawnmowers. The cable is an essential part of the machine, used to connect the bail control to the engine. The bail control is the part of a walk-behind mower that is used to start and operate the machine. If the cable is damaged, it will be impossible to use the mower.The metal cable has a flexible plastic housing, and it is durable. However, accidents during use can cause damage. The cable might also wear out eventually and will need to be replaced. A wrench will be needed to complete this replacement.This lawn mower cable assembly is used with select mowers from Craftsman, Briggs & Stratton, and Honda. This is a genuine OEM replacement part made from high-quality materials. The cable assembly is sold individually.

The drive clutch cable is a clutch or engagement cable that tightens the drive belt or lifts the spinning friction disc contained within the drive housing. It will cause contact between the driveshaft and turn the wheels. If the wheels refuse to turn, it may be due to a cable that is damaged, loose, or snapped. If tightening the tension fails to yield results, this OEM replacement cable is needed. Replacing a drive clutch cable is fairly easy. Remove the original and use pliers and a socket set to install and tighten the new one. "This is a drive clutch cable designed for use in snowblowers produced by MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Yard-Man, and others. It ships individually and is made of rubber, wire, and metal.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This part is a throttle control box assembly. The throttle controls the amount of air or fuel that enters the engine and also controls the speed of the engine. This assembly includes a throttle control knob that allows the user to control the throttle and the speed of the outdoor power equipment machine.A new throttle control box may be needed if any part of the assembly is cracked, broken, or damaged in any way. It's important to remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This part is a genuine MTD throttle control box assembly and is an OEM part sourced directly from the manufacturer and it is sold individually. This specific throttle control box assembly is compatible with edgers and lawn tractors that are manufactured by MTD, Yard Man, Yard Machines, and Cub Cadet.