Craftsman Lawn Mower Parts

This is a replacement lawn mower wheel that can be used with select walk-behind lawn mowers. The lawn mower wheel helps keep the deck off of the ground and provide an easy way to maneuver the machine. Wheels are made of durable plastic, but they can wear or become dented or otherwise damaged from impacts with rocks and stumps, or even just with regular use. A broken, crooked, or otherwise damaged wheel is going to affect the ability to maneuver the mower. In some cases, it may prevent operation completely. Replacing the wheel with a genuine part like this will resolve the issue. This OEM lawn mower wheel is manufactured by MTD. It can be used with lawn mowers from MTD, Craftsman, Huskee, Yard Machines, and Yard Man. The wheel is made of durable plastic and attaches to the axle on the lawn mower. This unit is just the wheel and the hardware required to secure it will be sold separately. Those who need multiple wheels will have to purchase additional quantities. Always be sure to disconnect the spark plug before working on the deck of the lawn mower and wear gloves for hand safety.

The wheels of a lawnmower and other lawn care equipment take a lot of abuse, even on well cared for machines. They can wear down over time, making it difficult to maneuver the equipment. Eventually, it may be necessary to replace the wheels if they are no longer rolling properly or if they have cracked. This wheel is eight inches in diameter and is easy to replace in just a few minutes. This OEM replacement wheel is sold individually and is compatible with many different types of lawn and garden equipment. These include lawnmowers, snowblowers, tillers, edgers, and log splitters. The wheels work with a range of brands, including Craftsman, Mastercut, Montgomery Wards, Sears, Bolens, MTD, Yard Machines, and Cub Cadet. Keep in mind that this is an individual wheel, so be sure to get as many as needed for the equipment.

This is a simple extension spring with an outside diameter of 0.38 and a slack length of 2.5. It is primarily used as an extension spring for snowblowers, but may be compatible with other lawn equipment. It’s designed to apply tension as the throttle is applied. The more gas there is, the more resistance will be present. Under most circumstances, replacement is easy. When the spring breaks or gets rusty, look at both points of attachment. Memorize where it’s attached, or take a picture, and remove the old spring using a pair of pliers if necessary. Install the new spring and the tool is ready to use. This is an OEM part sourced directly from MTD, and it is sold individually. It’s black in color and was initially designed for Troy-Bilt lawnmowers. However, because this is a versatile part, it has since been repurposed for a number of MTD and related machines in other brands. These include lawn tractors and snowblowers, as well as lawnmowers, in brands such as Ryobi, Yard Machines, Husky, and Cub Cadet.

This part is a genuine OEM replacement mandrel spacer washer usually used to line up drive pulleys on lawn tractors or riding mower engines. The drive pulley is an integral part of the transmission. As a type of washer, a mandrel spacer helps to distribute weight and pressure so that the link does not crack or bend. Compared to standard washers, though, mandrel spacers are quite thick, so they can take more of a load. The best time to replace a mandrel spacer washer is when making repairs to the drive pulleys. These parts take a lot of wear and tear and can corrode the connection over time. To prevent this from happening, replace the mandrel spacer washer as soon as it starts to look worn out or when conducting regular maintenance. This mandrel spacer washer is a top of the line replacement part for Ryobi, Jonsered, Weed Eater, Poulan, and Husqvarna engines. As such, this part comes sourced directly from its original manufacturer. This spacer washer does not ship with any additional hardware.

This genuine Husqvarna bolt and washer replacement part is specifically engineered to hold and secure the lawnmower blade in place. The bolt is threaded while the washer has a curved or rounded headed. A washer is needed for even load distribution of the threaded bolt. Fastening the bolt without the fastener may cause stress to the material it's driven into. One of the warning signs that the bolt and washer are broken is if the lawnmower blade doesn't rotate properly. Instead of moving in one circular motion, it turns erratically and goes up and down. In some cases, it will make a loud grinding noise during cutting. The lawnmower blade may even fly out from its normal position. Replacing the worn-down bolt and washer is fast and straightforward. First, shut down the engine and let it cool. Then, take out the spark plug and turn the mower on its side. Use a socket to remove the old bolt and washer. Then, grab the replacement and insert it through the blade's hole. Tighten it using the socket. This original Husqvarna bolt and washer is only suitable for lawnmowers made by Husqvarna, Craftsman, and Weed Eater. It is also compatible with some Dixon and Poulan lawnmowers. This bolt and washer replacement is sold individually.

This is a seat switch found on many different lawnmowers. It is a four-pronged plug with a button on the top of the part. The inside of the button has dual sets of contacts. One of them completes the circuit between two blades, while the other focuses on the additional blades. The seat switch turns the motor off if the user leaves the seat while the deck is engaged. It is an important safety component that can prevent injuries and should be replaced if it is damaged or broken. If the seat switch is broken, it won't recognize if someone is in the seat or not and will not cut the engine power if someone leaves the seat while the motor is running. Replacing the part requires a wrench set, a screwdriver, and work gloves. Lift the seat to gain access to the seat switch. Make sure the battery is disconnected throughout the process.This is an authentic OEM replacement part directly sourced from the manufacturer. It is sold as an individual part. The seat switch is compatible with lawnmowers made by Craftsman, Husqvarna, and Poulan.

This adapter attaches the blade to the motor shaft and can ensure a secure fit for the size of the blade that you need. The adapter will hold the blade in place and allow it to rotate appropriately. Although this piece is made of metal, it can wear down with regular use over time and may need to be replaced. It could also become damaged, which would require a more immediate replacement. Either way, this genuine OEM blade adapter can provide a solution for compatible mowers. This blade adapter is reasonably simple to install, but always disconnect the spark plug before doing any work. The Craftsman blade adapter can be used as a replacement part on compatible lawnmowers models from Craftsman, Husqvarna, Poulan and Poulan Pro, Weed Eater, EHP, Yard Pro, Sears, Rally, and Roper.

The blades for a lawn mower are attached to the blade adapter and the spindle. It ensures that the blades are securely in place and that they will stay in place when mowing. It is not safe or effective to use a mower if there are issues with the adapter. Over time, many things could happen to the blade adapter that would require a replacement. In some cases, the adapter could be stripped, which would mean that the blades would then stop rotating properly. Damage from use and misuse can happen in some cases. Normal wear and tear will occur, as well, which can cause a blade to start vibrating and will cause problems with mowing. This metal replacement blade adapter is a genuine OEM part that will work for lawn mowers from several different brands. Compatible brands include Husqvarna, Jonsered, and Craftsman. Replacing the blade adapter will require a wrench.

This is a replacement mandrel assembly used for mowers. The mandrel assembly is one of the most important parts of the machine. This is the part that houses the shaft that the mower blades attach to. The mandrel assembly is mounted to the deck of the mower. The mandrel assembly is made from metal and it tends to be durable. However, it may need to be replaced at some point for any number of reasons. There could be corrosion, or it might no longer be functioning properly because of damage. Regardless of the reason the assembly is not working properly, it will need to be replaced to ensure the machine has full functionality. The replacement is relatively simple to do, but it should be noted that the bolt holes do not come tapped. The genuine OEM replacement part is high-quality and is sold individually. It does not come with the four bolts that will be needed to attach it to the deck. This part is used for lawn mowers and riding mowers. The brands compatible with the part include Craftsman, Husqvarna, and Poulan.

This steering shaft is a genuine Husqvarna replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a steering shaft is to connect the steering wheel to the steering gearbox. This allows the wheels of the small engine appliance to turn smoothly.A steering shaft might have to be replaced in the event that it suffers damage over time; this could be a result of regularly steering through uneven and irregular terrain or of turning the steering wheel too far in either direction too often, which can be overwhelming to the gears. Additionally, a steering shaft might have to be replaced if there is material deterioration over time. If this occurs, a replacement steering shaft part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This steering shaft is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This genuine OEM replacement part is an extension spring for a Craftsman snowblower idler pulley assembly. The idler pulley attaches to a part of the snowblower's housing and is helps to transfer energy throughout the belt drive. This extension spring helps to redistribute some of the back-and-forth motion created in the pulley as the snowblower runs. This keeps the assembly from shifting out of place and potentially slipping. This extension spring is attached at two points and, if pulled in both directions too far, can eventually lose some of its tension. When this happens, the idler assembly can begin to shake and even slip out of place. Replacing the extension spring is an easy job that will only require a socket wrench to remove the idler pulley. A pair of pliers may help to remove the spring from its clips. This part is only compatible with Craftsman snowblowers and is sourced from its original manufacturer. It ships individually and any additional parts needed will have to be purchased separately.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.