Need Help?
Call or text
Blade guards are essential for protection from flying debris that may be kicked up or disturbed by the edger blade. They prevent debris such as small stones from being kicked up while the equipment is in use and are an important safety feature. Operating an edger without a blade guard can be dangerous. This edger blade guard can be used to easily replace worn out or broken blade guards.This edger blade guard is a genuine OEM part that has been sourced directly from the manufacturer. This replacement edger blade guard can be used on multiple different edger models including Troy-Bilt, Craftsman, and Husky. Please note that this part is sold individually.
This ignition coil assembly is a genuine MTD part, sold individually. This ignition coil assembly can be used as a replacement part for lawn mowers and string trimmers. This ignition coil assembly comes with all of the necessary components required to facilitate a complete replacement or a new installation of the part. The purpose of the ignition coil is to transmit the voltage from the battery of the appliance to ignite a spark in the spark plugs such that the engine can be powered on.If the ignition coil is not igniting the spark plugs and powering on the engine, it is likely that the component has suffered damage and will need to be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This ignition coil assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman, and Yard Man.
This starter pulley kit is designed for use on string trimmers. It is made to spin the flywheel so the engine will start up when the starter rope is pulled. Sometimes, the teeth on the starter pulley can wear out with extended use. This can result in teeth that do not contact the pawls on the flywheel. In some cases, the pulley will also wear in the area where the recoil spring attaches. If the string trimmer's engine isn't starting, has trouble starting, or has a pull rope that won't retract, a starter pulley kit offers the replacement parts needed. Before the replacement of the part is done, the engine should be cool to the touch. The wire and boot should also be removed from the spark plug before replacement to prevent starting the engine. This is a genuine OEM component that comes directly from the manufacturer. It's designed for use on gas-powered string trimmers by Husqvarna, Craftsman, and Poulan. It is made of hard plastic and steel and comes with the recoil spring, drive pulley, rewind pulley, and drive spring. This is sold as an individual kit.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
Usually ships within 4 - 14 days
This is a replacement carburetor for Husqvarna string trimmers and is also used on some Craftsman models. It consists of an aluminum body with a bright blue choke and cherry red primer bulb. Engines rely on a mixture of fuel and air for proper operation. In a small engine, the fuel and air mix inside the carburetor. This is achieved with a series of small channels, which release a fine mist of fuel into a vortex of air. When one of these channels gets clogged, it can negatively impact engine performance. Carburetors can often be cleaned with a commercial carburetor cleaning spray, but this is sometimes not sufficient to clean a badly clogged carburetor. In this case, other measures such as hypersonic cleaners can often be effective, but they’re not always worth the cost. The alternative is replacing the entire carburetor, which can be done using this kit. This is an OEM part sourced directly from the manufacturer, and it is sold individually. A heat shield is also included with the kit.
Installed new carburetor kit Read more
This is a genuine replacement for the line trimmer gearbox on select outdoor power trimmers. The gearbox is the housing that holds the gears responsible for turning the line reel. When the line reel turns, the string cuts grass and weeds. This part is made of durable metal, but it is also exposed to the elements and a lot of constant vibration, so it can become damaged over time and will need to be replaced. If the trimmer head stops spinning or there is a sudden grinding noise, it could indicate that this part needs replaced. It's important to use an OEM replacement for best results. This unit is sold as a complete assembly and includes the mounting hardware, three screws, head assembly, and the cap. A hex screwdriver, socket or wrench set, and Phillips screwdriver will be necessary to replace this part. Be sure to allow the unit to cool and wear gloves whenever performing repairs.This genuine OEM line trimmer gearbox is manufactured by MTD and compatible with machines from Craftsman.
An air filter blocks tiny particles from entering and harming the engine. Over time, it will accumulate dirt and dust. If it is too worn-down, it will no longer be an effective barrier. Small debris may make its way into the engine and cause clogging. It can impede proper airflow. Replacing an air filter is a relatively quick and straightforward maintenance project. Let the device cool first. Then, loosen or remove the air filter cover. Take out the failed filter and install the replacement. Make sure to align it to the housing. Return the air filter cover to its original position. This part will fit several trimmer models from brands like Husqvarna, Poulan, and Craftsman. It has the same shape and cut as the trimmer’s original filter. This replacement does not come with the airbox cover. One genuine Husqvarna airbox filter per order is included, sold individually.
The starter spring is what is used to create the recoil to start the engine on pull-start chainsaws, blowers, trimmers, and other lawn equipment. When the starter handle is pulled, the rope extends and pulls on the spring, causing it to tighten and then release, which creates the action to fire the motor. It may also be called the recoil spring, rewind spring, or return spring, but they all refer to the starter spring. Over time, this can become worn with use, and in some situations, it can even break completely. If the starter rope will not rewind into the housing, the spring may be twisted and need to be replaced. If so, this genuine OEM starter spring will do the job for compatible machines. This model is manufactured by Husqvarna and compatible with various Poulan and Husqvarna lawn equipment. This spring may serve as a replacement for many machines including blowers, hedge trimmers, grass trimmers, chain saws, and saws. Check the user manual for compatibility and fit, as well as part numbers. Be sure to install this according to all instructions and diagrams for safe and proper operation.
An ignition module works in conjunction with the flywheel to create an electric current. It sends the voltage to the spark plug at a precise time to ignite the fuel and air mixture in the cylinder. An ignition module does not have moving components, but exposure to heat can cause damage over time. There are several warning signs that the ignition module has failed. The most common ignition module related problem is engine sputtering. If the damage is severe, it may cause total engine start failure. This is an original Husqvarna ignition module replacement. This part is compatible with string trimmers, pole pruners, hedge trimmers, and leaf blowers from Craftsman, Poulan Pro, Weed Eater, and Poulan. It is sold individually. Other components are not included in this ignition module replacement.
The starter pawl bridge provides the resistance for the starter rope that is required to fire the engine. The bridge connects to the flywheel and is responsible for making it spin when the starter rope is pulled. Over time, the pawl can become worn with use. In the event that other starter components go bad, those can also damage the pawl. If the flywheel does not engage, it may be a faulty pawl. Always use gloves when replacing engine components and be certain to disconnect the spark plug before working on any engine parts. This OEM starter pawl bridge is manufactured to exact standards and is made by Husqvarna. It is compatible with select Husqvarna and Jonsered trimmers. This durable replacement part is made of metal and sold individually.
This fuel tank is a genuine Husqvarna part, sold individually. This fuel tank can be used as a replacement part for lawnmowers and lawn tractors.The fuel tank might have to be replaced if it suffers damage that prevents it from being able to store fuel. This could occur as the result of damage in the form of puncturing, tearing, ripping, or eroding to the material of the fuel tank so that fuel leaks out of the tank and into the appliance. If this occurs, the fuel tank should be immediately removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This fuel tank is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.