Crosley Dishwasher Switch

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

• Inability to properly detect water levels
• Long fill or drain times
• Failure to fill or drain completely
• Potential overflow or standing water issues
• Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.

The Pressure Switch is an OEM part for Frigidaire dishwashers. It plays a crucial role in monitoring water pressure inside the dishwasher, signaling the control module when to activate various components during the wash and rinse cycles. Overl or under pressure conditions could damage the dishwasher or prevent it from cleaning properly.

Symptoms of a bad pressure switch include: 

• Dishes not getting fully clean 
• Cycles not completing or getting stuck
• Error codes displaying
• Strange noises or leaks coming from the dishwasher

Causes of a bad pressure switch can be wear and tear over time, mineral buildup interfering with the switch's function or accidental damage from household chemicals or objects left in the dishwasher. 

This OEM Frigidaire replacement part is designed to function like the original part for reliable performance. It is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 
 

This miniature door switch is the snap-action interlock that tells the appliance when the door is closed. Replacing a worn or sticking switch restores reliable start/stop and proper door-status sensing for safe, consistent operation. What it does:

• Acts as the latch/interlock sensor for door open/closed status
• Signals the control to allow or prevent operation based on door position
• Typical symptoms include: won't start or shows a door message, stops when the door is bumped, or light/fan behavior doesn't match door position

• 1 miniature door switch

• Disconnect power before servicing. If working on a microwave, high voltage may be present even when unplugged—properly discharge the capacitor.
• Access the latch/interlock area; note wire positions and transfer one lead at a time to the new switch.
• Use a multimeter to confirm the switch changes continuity when pressed before reassembly.

This door switch detects when the dishwasher door is fully closed and latched. Replacing a worn or intermittent switch restores reliable start/stop operation and ensures the safety interlock cuts power whenever the door is opened.

• Senses door-closed status and sends a signal to the control
• Interrupts power to the machine when the door opens
• Helps prevent operation with an unlatched door
• Typical failure symptoms: won't start, stops mid-cycle if the door is bumped, or only runs when pressing on the door

• Disconnect power at the breaker before servicing
• Access the latch/switch area by removing the inner door panel or console; note wire locations
• Transfer wires one at a time and secure the new switch in the bracket
• Verify latch engagement and switch actuation before restoring power

This replacement switch assembly restores proper signaling between the dishwasher's mechanism and the control, so selected functions register and cycles can start and run consistently. A worn or failed switch can cause intermittent or no operation. What it does:

• Provides the on/off signal the control needs when the mechanism is actuated
• Can lead to a dishwasher that won't start or stops mid-cycle when failing
• May cause options or selections to be unresponsive or require extra pressure
• Heat damage or a broken actuator on the switch assembly can indicate failure

• 1 switch assembly

• Disconnect power to the dishwasher before servicing
• Access location varies by model; refer to your model's parts diagram/service information
• Photograph wiring and move connectors one at a time to the new assembly
• Verify secure connections and proper wire routing to prevent pinching during reassembly

This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:

• Provides the electrical on/off or function control for the appliance circuit.
• Replaces a failed switch that can cause intermittent operation or unresponsive controls.
• Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
• Connects to the existing wiring harness and mates with the original mounting points.

• Disconnect power to the appliance before beginning any work.
• Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
• Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
• Restore power and verify the replaced switch operates the function correctly.