Crosley Dishwasher Spring Parts

The Door Spring is an OEM part for Frigidaire dishwashers. It plays a critical role in the smooth operation of the dishwasher door, providing the necessary tension to ensure that the door opens and closes gently and securely. Without a functioning door spring, the door may drop open suddenly or be difficult to close, which can lead to potential hazards and inefficiencies in the kitchen.

Causes of a bad Door Spring can include stretching or snapping due to metal fatigue, corrosion from exposure to moisture and detergents, or improper alignment that leads to uneven wear and tear.

Symptoms of a failing Door Spring include:

• The dishwasher door feeling unusually heavy or dropping open
• A snapping sound when opening or closing the door
• Difficulty in keeping the door closed or fully open
• The door slamming shut rather than closing gently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dishwasher Door Spring is an OEM part for Frigidaire dishwashers. It helps to balance and support the weight of the dishwasher door, allowing it to open and close smoothly and safely. The spring ensures that the door remains stable at any angle, preventing it from dropping too quickly or not staying open. This spring, 8" in length, is sold individually. 

The door spring may need to be replaced if it becomes worn out, stretched, or broken. Causes of a bad door spring can include frequent use, excessive force when opening or closing the door, and general wear and tear over time.

Symptoms of a bad dishwasher door spring include:

• The door dropping open quickly
• Difficulty in keeping the door open at various angles
• The door not closing properly
• Unusual noises when opening or closing the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Spring is an OEM replacement part for Whirlpool dishwashers. It assists in balancing and supporting the door during opening and closing motions. 

Causes of a bad door spring can include metal fatigue from years of compression and extension during cycles. The spring can also become misshaped if over-tightened during maintenance or installation.

Symptoms of a bad door spring for a dishwasher include:  

• Doors that slam shut too forcefully or rapidly
• Difficulty smoothly opening or closing the door  
• An imbalanced feeling when lifting or lowering the door

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper built-in dishwashers.

The Door Spring is an OEM part for Frigidaire dishwashers. It provides smooth opening and closing of the dishwasher door by maintaining tension and balance. This spring ensures that the door moves gently and stays in place when opened, preventing slams that could lead to damage or injury.

Symptoms of a bad Door Spring include:

• A door that falls open abruptly or feels heavier than usual 
• Difficulty in keeping the door open 
• Noticeable wear or rust on the spring 
• Unusual noises when opening or closing the door

Causes of a bad part can include normal wear and tear over many cycles of use, corrosion from exposure to moisture, and mechanical failure due to improper alignment or installation.

This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Note: Also, consider checking the door spring linkage 154325201.

The Door Spring is an OEM part for Whirlpool dishwashers. This part allows the smooth and controlled operation of the dishwasher door. The spring helps balance the weight of the door, allowing it to open and close effortlessly without slamming shut.

Causes of a bad door spring can include wear and tear from repeated use, corrosion or rust, and breakage due to excessive force or mishandling.

Symptoms of a bad door spring include:

• The dishwasher door dropping quickly or not staying open
• Difficulty in opening or closing the door
• Unusual noises when moving the door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

A replacement tension spring designed to restore proper movement and return force to the appliance mechanism. Helps the affected component operate smoothly so doors, levers or assemblies move with correct tension and alignment. What it does:

• Provides return and holding tension for the appliance mechanism to restore normal movement.
• Helps reduce sagging, misalignment, or loose operation of the associated door or linkage.
• Minimizes noise and vibration caused by a worn or weakened spring.
• Works as the direct-fit part when the listed part number matches your appliance.

• Disconnect power and water (if applicable) before beginning any repair.
• Springs are often under tension—wear eye protection and use caution when removing or installing.
• Follow the appliance's service manual or OEM instructions for correct orientation and safe installation.

This replacement spring provides the tension and return force needed for proper movement of a spring-loaded appliance component. Use it to restore smoother operation and consistent positioning where the original spring has worn or lost tension. What it does:

• Supplies tension and return force for hinges, latches or other spring-loaded mechanisms
• Helps restore proper movement and alignment of parts that sag, stick, or won't return to position
• Prevents excess play or slippage in spring-loaded assemblies when functioning correctly
• Works as a direct-fit replacement when the original spring is worn, stretched, or broken

• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Use appropriate hand tools and eye protection; springs may be under tension and can release suddenly
• Compare the old spring to the new one for length, coil count and end type before installation

This dishwasher door spring provides the counterbalance tension that lets the door open and close smoothly. Replacing a worn or broken spring restores proper door feel and helps prevent the door from dropping unexpectedly.

• Provides counterbalance tension so the door opens and closes smoothly
• Helps the door stay partially open without drifting
• Reduces slamming or sudden drop when opening
• Common failure signs: door feels heavy, drops quickly, opens unevenly, or a spring is visibly broken

• Disconnect power and shut off water; remove the toe-kick/access panel
• Support the door; note spring routing and which frame holes are used before removal
• Install the new spring in the same holes; adjust hole selection only per service information to fine-tune tension
• Springs are under tension—wear gloves/eye protection; consider replacing both springs together for balanced operation