Parts for Whirlpool DU929PFGQ2: 05 - Dishrack Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Small mounting clip that secures interior panels and trim pieces in your dishwasher. Replaces clips that are cracked, broken, or missing to restore fit.

Includes spray arm support W10851031 and clip WP303722.

Protective rubber bumper for dishwasher dishrack. Installs on the outer front edge of the lower rack. Replace if cracked, broken, or missing.

Replacement lower dishrack wheel for dishwashers. Installs on the bottom rack to enable smooth rolling. Replace if wheel is cracked, broken, or worn.

Lower dishrack assembly for dishwashers. Holds dishes, pots, and pans in the bottom section. Replace when rusted, cracked, or coating is worn or peeling.

Support lock for upper wash.

Color: white. Measures about 2 inches wide by 9-1/2 inches high by 15 inches deep.

Silverware basket, small items lid.

Ring bearing supports spray arm rotation in dishwashers. Mounts at spray arm base to allow free spinning. Replace if cracked, worn, or missing.

The Upper Dishrack Rail is an OEM replacement part for Whirlpool dishwashers. It guides upper racks in and out for easy access to dishes. 

Causes of faulty rails can include worn rollers, broken clips, or stress cracks in modules after repeated cycles. 

Symptoms of a bad upper dishrack rail include:

• Difficulty inserting or removing the upper rack smoothly   
• Off-track movement that impacts washing coverage
• Detached ends or segments that compromise stability

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Dishwasher upper rack track stop clips into the dish rack track slots to secure the rack position. Replace if cracked, broken, or missing.

This is only a door. For entire silverbasket, including this door, order W11027965.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This is the right side silverware basket clip. For left side use 8051187.

This is the left side silverware basket clip. For right side use 8051188.

Replace cracked or broken dishwasher rack roller axle assemblies. Installs on upper or lower dish racks to restore smooth gliding. Includes clips.

This replacement dishrack restores secure loading and proper spacing so wash water reaches every item. Replacing a bent or rusty rack helps prevent tipped dishes and marks from flaking rust, and keeps loading/unloading smooth when the rack rollers are intact.

• Holds plates, bowls, and cups in place during wash and rinse cycles
• Maintains spacing for spray coverage and drying airflow
• Rolls in and out along the rails when paired with functional rack rollers
• Common symptoms include broken or bent tines, flaking coating or rust, items tipping, or difficulty sliding the rack

• Disconnect power to the dishwasher before servicing
• Open the door, pull the rack forward, release rack stops/end caps if present, and slide the old rack off the rails
• Transfer any reusable accessories from the old rack to the new rack as required by your model
• Slide the new rack onto the rails, reinstall rack stops, and verify smooth travel before running a cycle

Secures the flex-row tines in your dishwasher's rack assembly. Replace if the retainer clip is broken, cracked, or missing, causing tines to loosen or rattle.

Replacement tine row for dishwasher upper or lower rack. Holds dishes upright and properly spaced. Replace if tines are rusted, broken, or rotted away.

Lower spray arm assembly with integrated shield for dishwashers. Replaces cracked, broken, or worn spray arms with torn center mounts or split rings.

Cap with rubber pressure seal to hold down lower spray arm. Instruction sheet included.

This lower wash arm bearing keeps the dishwasher's lower spray arm turning smoothly so dishes get even water coverage. It replaces a worn bearing to reduce noise and restore proper spray-arm rotation. What it does:

• Supports the lower spray arm so it can spin freely during cycles
• Helps maintain even water distribution for better cleaning
• Reduces grinding or scraping noises caused by a worn bearing
• Prevents wobbling or misalignment of the lower spray arm

• Disconnect power and shut off the water supply before starting any repair
• Inspect the spray arm and mounting surfaces for damage; clean before installing the new bearing

Color: white. It measures about 1-1/2 inches high by 2 inches deep.

This small cupshelf is the replacement door shelf insert that restores secure storage for cups, glasses and small items in your refrigerator door. It helps organize the door and prevents items from shifting or falling. What it does:

• Replaces a cracked, broken or missing small cupshelf to restore door storage capacity
• Supports cups, small glasses and lightweight containers on the refrigerator door
• Helps keep items organized and prevents sliding when the door opens or closes
• Matches OEM fit and mounting points when used as the specified replacement part

• One small cupshelf

• Remove items from the door and lift out the old shelf; align tabs and snap the new shelf into the existing door mounts
• No special tools are typically required; handle carefully to avoid damaging door trim or mounting tabs
• Always follow refrigerator power/safety guidance from the manufacturer when working near controls or lights

Secures the cup shelf to your dishwasher's upper rack. Replace this clip if it's broken, cracked, or missing to keep your cup holder stable and secure.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.