Parts for Maytag MDBH949PAW1: 01 - Door And Panel Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Right-hand door hinge that restores proper door alignment and smooth operation. Replace if your dishwasher door sags, binds, or won't stay open. Verify fit.

Replacement hinge brace for dishwasher doors. Anchors the door hinge assembly to the tub. Install if original is cracked, warped, or missing.

This is the exterior-facing door panel that attaches to the front of the dishwasher door. It provides the finished outer appearance and helps protect the internal door components. Replace this panel if it is dented, scratched, discolored, or warped, or if the mounting points are damaged and the panel no longer sits flush.

This is the outer door panel that forms the visible exterior face of the dishwasher door. It provides a finished appearance and protects the internal door components, including insulation and wiring. Replace this panel if it is dented, scratched, discolored, or damaged, restoring the appliance's appearance.

This is a stainless steel outer door panel that forms the visible exterior surface of the dishwasher door. It provides a finished appearance and protects the internal door components. Replace this panel if it is dented, scratched, rusted, or if you are updating the look of your dishwasher.

This is the lower front access panel (toe kick plate) that covers the area beneath the dishwasher door. It conceals the water supply, drain connections, and electrical wiring while providing a finished appearance. Replace this panel if it is cracked, warped, discolored, or damaged during installation or maintenance work. This panel is bisque in color.

White front access panel for dishwasher door. Replace worn, discolored, or damaged panels to restore your dishwasher's appearance. Direct fit installation.

Black plastic access panel that covers the bottom front of your dishwasher. Replace if cracked, broken, scratched, or missing to restore appearance.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.

• Fastens panels, brackets, or internal parts to the cabinet/frame
• Helps maintain alignment to reduce vibration and rattling
• Replaces lost, stripped, or corroded screws
• Common symptoms: loose panels/trim, rattles, or a screw that won't tighten

• Disconnect power; shut off water or gas if applicable
• Match thread and length to the original; replace one at a time to keep alignment
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten, especially into plastic or thin sheet metal

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

This is a small retainer clip in a biscuit (bisque) color used to secure the access panel on the front of a dishwasher. It snaps into place to hold the lower access panel firmly against the dishwasher frame. Replace this clip if the access panel is loose, rattling, or won't stay in position due to a broken or missing retainer.

White retainer clip secures the kickplate at the bottom of your dishwasher. Replace if broken, cracked, missing, or lost to keep kickplate firmly attached.

Color: Black

The Access Panel Retaining Clip is an OEM part for Whirlpool dishwashers. This black clip is used to secure the access panel to the dishwasher frame, ensuring it stays in place and provides a finished look while protecting internal components.

You should replace the access panel retaining clip if it becomes damaged or worn out. Over time, the clip can break or lose its grip due to repeated removal and installation of the access panel or general wear and tear.

Symptoms of a bad access panel retaining clip include:

• The access panel not staying securely attached
• Rattling or vibrations from a loose panel
• Missing or broken clips

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Friction pad for dishwasher door hinge assembly. Reduces friction for smooth door operation. Replace if cracked, broken, worn, or missing from spring bushing.

Foam pad that installs between dishwasher door panels to dampen sound and shield from heat. Replace if torn, compressed, or missing for quieter operation.

White door handle pocket for dishwashers. Mounts on the dishwasher door to provide grip area. Replace if cracked, broken, or discolored.

Black plastic handle pocket trim for dishwasher doors. Replaces cracked, broken, or missing trim pieces that cover the door handle mounting area.

Replacement door handle pocket for dishwashers. Installs on the front panel to house and support the handle. Order when original is cracked or broken.

This is a recessed pocket handle that mounts on the front panel of a dishwasher door, providing a grip area for opening and closing the door. It features a sleek, integrated design that sits flush with the door panel. Replace this part if the handle is cracked, broken, or has become loose and no longer provides a secure grip.

Reduce noise and prevent heat loss with this dishwasher toe panel insulation. Replace when soiled, damaged, or missing. Adhesive-backed for easy install.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.