Parts for Bosch WFL2060UC/30: Drum Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix a washer that won't spin or tumble clothes with a new drum drive motor. Solves drum rotation failure from worn motor windings and bearings.

The Carbon brush, drum motor is an OEM part for Bosch washing machines. These carbon brushes are responsible for transferring electrical current from the commutator on the motor to power the rotary movement inside the washing machine drum.  Two come per package.

Symptoms of a bad carbon brush, or drum motor can include:

• noisy or squealing sounds coming from the motor during the operation  
• the drum fails to spin or spin inconsistently
• the washer is unable to enter spin cycles
• slow or reduced agitation 

Causes of a bad part include normal wear and tear over extended use. As the brushes continuously contact the commutator, friction can cause them to wear down over time.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This is a mounting holder used inside a washing machine to secure internal components in place. It provides structural support and helps maintain proper alignment during operation. Replace this holder if it is cracked, worn, or broken, which can cause excessive vibration, unusual noises, or misalignment of internal parts.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

Replacement screw for washer assembly. Used to secure internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Shock absorber stabilizes the washer tub during operation. Replace if cracked, broken, or loose to control vibration. Mounts between tub and cabinet.

Fix a washer that won't spin or agitate with this drive belt. Connects the motor to the drum for proper rotation. DIY-friendly repair in about 1 hour.

Secures the drum pulley to the washer's drive system. Replace this bolt if it's stripped, missing, or loose to properly fasten the pulley assembly.

Replace a worn washer drum pulley if your machine makes squealing noises, won't spin properly, or the drum turns unevenly. Simple repair with basic tools.

Replace worn washer drum bearings to restore quiet operation and eliminate grinding, squealing, or wobbling. Supports drum shaft for smooth rotation. Verify fit with your model number before ordering.

Replace your washer's rubber sealing ring to stop water leaks and maintain a tight seal between parts. Install when you notice dripping or moisture buildup.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This shaft seal fits around the main drive shaft where it passes through the outer tub of the washing machine. It prevents water from leaking out of the tub and into the motor or bearing area. Replace this seal if you notice water dripping from beneath the tub, hear grinding noises during the spin cycle, or find water pooling under the machine.

This is the inner drum (spin basket) where laundry is placed during a wash cycle. It rotates at high speed to agitate and extract water from clothes. Replace this drum if it has cracks, chips, or excessive rust that is snagging or staining clothing, or if the basket wobbles and produces loud banging noises during the spin cycle.

This is the dishwasher inner tub — the main water-holding enclosure that supports racks and directs wash water. Replacing a damaged tub restores the cabinet's watertight integrity and prepares the appliance for safe operation. What it does:

• Houses wash and rinse water and provides mounting points for racks, spray arms, and seals
• Maintains a watertight chamber to prevent leaks and water damage
• Supports proper spray and drainage by keeping components aligned
• A cracked, warped, or punctured tub can cause visible leaks, pooling on the floor, or dishwasher failure to fill/hold water

• Disconnect power and water supply before starting; follow manufacturer service procedures
• Replacing the tub typically requires partial disassembly of the dishwasher (door, panels, and internal components)
• Handle carefully — tubs can be heavy and have sharp edges; wear gloves and eye protection

Secures the front counterweight to the washer drum. Replace if strap is cracked, broken, worn, or missing to restore proper weight distribution.

Replace your washer door seal to stop leaks and prevent mold buildup. Essential when you notice water escaping or damage to the rubber. Verify fit by model.

Wire clamp spring that secures the door boot to the washer's front panel opening. Replace if broken, stretched, or missing to keep the seal properly seated.

This spring-tank is the replacement spring assembly used to restore proper door balance and movement. It helps the appliance door open and close smoothly and prevents sudden drops or heavy lifting. What it does

• Provides counterbalance tension for the appliance door to control opening and closing motion
• Reduces sagging or slamming of the door caused by worn or broken springs
• Restores smooth, even movement when the door feels heavy or uneven
• Works as a direct-fit replacement when the original spring assembly fails

• One spring-tank

• Disconnect power and water to the appliance before starting any repair
• Handle spring components carefully; springs are under tension and can cause injury if released unexpectedly
• Use proper tools and follow manufacturer instructions or a service manual for safe removal and installation

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.