Parts for Bosch WFL2060UC/30: Pump Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This dispenser tray is a removable insert that fits inside the detergent dispenser drawer of a washing machine. It separates compartments for detergent, bleach, and fabric softener so each is dispensed at the correct point in the wash cycle. Replace this tray if it is cracked, warped, or clogged with residue that cannot be cleaned, which can cause improper dispensing of laundry products.

The washer lower dispenser tray is the plastic housing at the bottom of the detergent dispenser drawer that holds and channels laundry products into the wash drum. It guides detergent, fabric softener, and bleach into the machine at the correct time during the wash cycle. Replace this part if the tray is cracked, warped, or detergent is leaking out of the dispenser instead of flowing into the drum.

If detergent isn't dispensing properly or the drawer leaks, the dispenser case may be cracked or clogged. This replacement part restores function.

This valve magnet is the solenoid actuator used to open and close a dishwasher water/control valve, restoring proper water flow for filling and cycle operation. It replaces a failed or weak magnet to help the valve respond correctly. What it does:

• Converts electrical signal into linear motion to operate the dishwasher valve
• Restores valve opening and closing when a worn or stuck magnet causes fill or circulation issues
• Commonly used when dishwasher won't fill, stops mid-cycle, or shows related valve/fill errors
• Works with the valve body; does not include seals or the full valve assembly

• Disconnect power and shut off the water supply before beginning service
• Replace with the matching OEM magnet and ensure proper seating on the valve body
• Keep terminals dry and secure electrical connections; inspect gaskets and valve body for damage

Connects your washer to the household water supply. Replace if hose is cracked, leaking, worn, or damaged to prevent water damage and ensure proper fill.

The washer water inlet filter is a small mesh screen that sits at the water inlet valve connection point and catches sediment, debris, and mineral particles from your home's water supply before they enter the machine. Keeping this filter clear ensures proper water flow into the washer. Replace this part if your washer is filling slowly, not filling at all, or if the existing filter is torn, corroded, or too clogged to be cleaned effectively.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

Secures rotating components in your washer to prevent movement and vibration. Replace if parts feel loose or noisy. Confirm fit with your model number.

Fix washer drainage issues with this sump check ball. Prevents water backflow in the pump system. Simple DIY repair for most home mechanics.

This eco hose sump assembly manages water drainage and filtration in the dishwasher's lower section. Replace if water doesn't drain properly after cycles, you notice standing water in the bottom, or error codes related to drainage appear.

This flexible drain hose routes wastewater from the dishwasher tub to the drain pump or household drain, helping remove used water after a cycle. It replaces a damaged or leaking hose to restore proper draining. What it does

• Carries wastewater from the dishwasher to the drain pump or disposal
• Stops leaks and prevents water pooling when the original hose is cracked or split
• Helps resolve slow or incomplete draining caused by a compromised hose
• Fits the factory hose connections and follows the cabinet routing to avoid kinks

• One flexible drain hose

• Disconnect power and turn off water before beginning any repair
• Remove the lower access panel or toe kick to reach hose connections
• Inspect and follow the original routing; avoid sharp bends or kinks that restrict flow
• Secure hose with appropriate clamps and check all connections for leaks after testing

Fix washer water level issues or won't fill correctly with a new pressure chamber. This part regulates water sensing for proper fill cycles.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Fix washer overfilling or fill errors with this pressure chamber hose. Restores proper water level sensing by connecting the sump to the pressure chamber.

Fix washer not draining or slow drainage with this drain pump tube. Connects pump to reservoir. Moderate DIY repair, typically 30-45 minutes.

Water pooling under your washer? A cracked or clogged drain reservoir housing disrupts wastewater flow. This repair restores proper drainage.

Vent hose for washer drain reservoir. Installs between the drain pump and reservoir to allow air circulation. Replace if cracked, split, or missing.

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

Air duct for washer ventilation system. Installs between the tub and outer cabinet. Replace if cracked, damaged, or missing to restore proper airflow.

Fix a washer that won't drain or hums during drain cycle. This drain pump removes water during wash cycles. DIY repair takes 20-90 minutes.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

Fix a washer that won't stop filling or overflows during cycles. This water valve magnet controls water flow during wash and rinse. Common DIY repair.

Fix washer leaks or uneven water flow with this T-connector. Joins three water lines to restore proper distribution. Simple DIY repair.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.