Electrolux Range / Cooktop / Oven Control Board

Fix E15 error codes, blank displays, or unresponsive controls with this range electronic control board. Restores oven heating and timer functions.

This is a relay board that controls power to the surface burner elements on an electric range or cooktop. It receives signals from the electronic oven control and switches the heating elements on and off at the correct power levels. Replace this board if your surface burners fail to heat, heat inconsistently, stay on continuously, or if you notice error codes related to the surface elements.

This electronic oven control board governs your range's heating functions and displays the time and timer. Replacing a failed board restores reliable bake/broil operation, accurate temperature control, and a responsive clock/timer interface. What it does:

• Controls bake/broil circuits to run selected cooking modes
• Monitors the oven temperature sensor and regulates heat to the set temperature
• Drives the time-of-day and countdown timer display
• Interprets keypad inputs for mode selection and settings
• Failure symptoms can include no heat or erratic heat, a blank or flickering display, or unresponsive buttons

• One electronic control board assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Use anti-static precautions and handle the board by its edges
• Photograph wiring and transfer connectors one at a time to the same positions
• Reuse the existing mounting hardware and any faceplate/overlay as required; set the clock after restoring power

Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.

This oven control board manages the range's bake and broil functions, temperature regulation, and the display/timer. Replacing a failed board restores accurate heating and responsive controls so the oven starts, runs, and shuts off as expected.

• Regulates bake and broil element relays based on temperature-sensor feedback and user settings
• Powers and manages the clock, timer, and oven display interface
• Common symptoms of failure: no bake/broil heat, blank or unresponsive display, beeping or error codes, oven won't turn off, or erratic temperature
• Helps restore consistent preheating and temperature control when the existing board is faulty

• Disconnect power at the breaker before servicing; verify no power is present
• Access the board from the control panel/backguard area
• Photograph wiring, then move connectors and mounting hardware to the new board one-for-one; handle electronics by the edges to avoid ESD damage
• After reassembly, restore power and test bake and broil functions and the display/keys

Fix E15 errors, runaway oven temperature, or unresponsive controls with this range control board. Manages cooking modes and temperature regulation.

Fix oven lights that won't turn off, error codes E75/E35/F15, or non-responsive controls. This control board restores normal range operation.

If your range displays E15 error codes, won't turn off, or has no oven heat, the electronic control board likely failed. Moderate DIY repair in 1-2 hours.

Fix F90 error codes, intermittent operation, or unresponsive oven controls. This range control board restores full electronic function to your oven.

Main electronic control board for electric cooktops. Manages user interface and appliance functions. Replace if board is damaged, burnt, or unresponsive.

Range won't heat or display is blank? This electronic control board manages oven temperature, timer, and cooking commands to restore front-panel operation.

Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.

Fix an oven that won't heat, shows error codes, or has an unresponsive display. This control board restores proper function to wall ovens.

Fix an oven that won't start, shows error codes, or has unresponsive controls. This main control board restores timing, display, and temperature regulation.

This is a relay control board that manages the power delivered to the surface burner elements on a range or cooktop. It receives signals from the electronic oven control and switches the heating elements on and off to maintain the selected temperature. Replace this board if one or more burners fail to heat, stay on continuously, heat unevenly, or if you notice error codes related to surface element control.

This is the power supply board that provides regulated electrical power to the oven control board and other electronic components in the range. It converts incoming voltage to the levels needed by the control circuitry. Replace this board if the range display is blank, flickering, or if the oven and burner controls are completely unresponsive despite the unit receiving power.