Electrolux Range Gas Conv Kit Parts

This top burner orifice meters gas to a 14,000-BTU surface burner on your range, maintaining the correct flame size and heat output. Replace a worn or incorrect orifice to restore consistent burner performance and control. What it does

• Regulates gas flow to the 14,000-BTU top burner for proper flame height and shape
• Helps resolve weak or oversized flames and uneven heating
• Can reduce yellow/orange flame tipping and improve simmer control
• Supports reliable ignition by ensuring correct fuel metering

• One 14,000-BTU top burner orifice

• Shut off gas supply and power; allow the cooktop/range to cool before service
• Remove burner cap and head to access the orifice; use the correct socket/wrench
• Install and snug—do not overtighten; verify it's the correct orifice for the burner position and gas type specified for your model
• Reassemble, check for leaks with a soapy-water solution, and verify a stable, blue flame (adjust air shutter if applicable)

For 12k burner.

This ignitor orifice assembly supplies and meters gas to the burner while positioning the ignitor for reliable ignition, helping restore consistent burner lighting and oven heat. What it does:

• Meters gas flow to the burner and aligns the ignitor for proper spark/heat-up
• Restores reliable ignition when the burner lights slowly or not at all
• Helps maintain a steady flame and consistent cooking temperatures
• Prevents intermittent ignition and repeated sparking during use

• One ignitor orifice assembly

• Shut off gas supply and power to the appliance before starting work
• Access usually requires removing the burner/grate and possibly the oven or range top; use basic hand tools
• Inspect nearby lines and fittings for damage; replace any cracked or corroded parts
• If you smell gas or are uncomfortable working on gas appliances,

This LP conversion kit lets a compatible gas range or cooktop be converted for use with propane (LP) fuel, restoring safe burner performance after changing fuel types. Use the kit to adapt fuel delivery and burner settings for LP operation. What it does:

• Reconfigures burner fuel delivery for propane so the appliance operates on LP instead of natural gas
• Provides the parts needed to change orifices and adjust pressure flow for LP-compatible combustion
• Helps correct symptoms like poor burner ignition, low flame size, or uneven heating when set up for the wrong fuel
• Supports safe, manufacturer-recommended fuel conversion when installed correctly

• LP conversion kit components

• Installation should follow the manufacturer's conversion instructions exactly
• Turn off and disconnect the gas supply before beginning work
• After installation, test for leaks and verify proper burner ignition and flame characteristics

This orifice is the small gas-fitting that meters fuel to a range or cooktop burner, helping maintain the correct flame for safe, even cooking. Replacing a worn or clogged orifice restores expected burner performance and heat control. What it does

• Meters and directs gas from the valve to the burner for proper combustion
• Helps maintain an even, stable flame and consistent heat output
• A clogged or damaged orifice can cause weak, uneven, or noisy flames
• Correct orifice sizing is required for safe burner operation and efficient cooking

• One orifice

• Turn off gas supply and power to the appliance before servicing
• Replace only with the exact orifice specified for your appliance
• After installation, check all connections for leaks using a soap solution or a gas leak detector

LP orifice / size #93 (9.5k)

This ignitor orifice assembly replaces the gas orifice and ignitor at the oven/burner to restore reliable ignition and consistent gas flow. Use it when your bake or broil burner has ignition problems or unstable flames. What it does:

• Provides ignition for the oven/broil burner so the burner lights consistently
• Metered orifice ensures proper gas delivery to maintain a steady flame
• Helps stop delayed ignition, weak or uneven flames, or continuous clicking from the igniter
• Restores safe burner operation when the original assembly is worn or damaged

• One ignitor orifice assembly

• Turn off gas supply and disconnect power to the appliance before starting work
• Basic hand tools usually required; follow the appliance service manual for instructions
• Do not force parts or overtighten fittings
• If you smell gas, stop work immediately, leave the area, ventilate if safe.

This ignitor orifice assembly directs and meters gas to the oven burner and provides the correct ignition pathway for reliable lighting. Replaces a worn or damaged assembly to restore consistent ignition and proper burner operation. What it does:

• Controls gas flow to the oven burner through the correct orifice size for safe ignition
• Works with the oven ignitor to allow the burner to light when called for
• Helps stop delayed lighting, weak flames, or burners that fail to light
• Fits into the burner manifold and aligns with factory ignition components

• One ignitor orifice assembly

• Turn off gas supply and disconnect power before servicing
• Install only the exact replacement part for your model;
• Tighten connections to OEM torque and check all fittings for leaks with a soapy water solution

This conversion kit changes a compatible gas range or cooktop's fuel configuration so burners operate correctly when switching fuel types. Use it to restore proper burner flame height and heat control after a gas-type change. What it does:

• Replaces orifice/regulator components needed to convert the appliance between gas fuel types
• Restores correct burner flame size and stability when fuel type is changed
• Helps eliminate low, uneven, or hard-to-light burners caused by incorrect orifices
• Ensures the appliance matches local fuel supply and operating requirements

• Gas conversions must follow the OEM instructions included with the kit; read all documentation before starting
• Turn off the gas supply and electricity to the appliance before beginning work
• Additional parts or adjustments may be required for some models