Need Help?
Call or text
If your oven won't bake or broil, the clock control board likely failed. This part regulates temperature and sends power to heating elements. DIY-friendly.
I first felt along each heating element (bake and broil) hoping to find a rough or blistered place on them. But they were both smooth with no irregular places. (replacing the elements would have been the easiest and cheapest repair. Pulled the back off the range (unplugged, of course) - checked wiring. There were no loose connections or burned wiring. I disconnected the elements and checked them with a ohmmeter (VOM) and both had continuity. Discovered that both elements used the same... Read more
Fix F10 error code or oven that won't heat with this control board. Manages temperature, timer, and heating modes. Moderate DIY repair with video guide.
I researched online and found that it was probably one of two things wrong: the heat probe or the control board (clock). Since the probe was less expensive, I ordered that on Appliance PartsPros. It arrived SO quickly, and with the repair video I easily replaced it. BUT... it still got the F10 reading. Sigh. So I found a local appliance repairman (I didn't want to replace a more expensive item if it turned out I was wrong). He was a good one: he listened to my story, said he was sure it was the... Read more
Fix F10, F11, or F12 error codes, oven temperature issues, or non-heating elements with this range control board. DIY repair in about 30 minutes.
I ordered a new kit and replaced it. It was easy except the video on the website did not include how to get off the front sticker. However, I did find another video to help Read more
Fix oven not heating, F10 error codes, or non-working controls. This electronic control board regulates baking temps and timers. DIY-friendly repair.
I ordered the oven control board, I was told that it would fix my problem. I installed it, which was extremely easy, and it worked. The oven worked flawlessly. Read more
Fix F11 or F13 error codes, blank display, or total control panel failure. This gas range circuit board restores oven timers and functions. DIY-friendly.
We simply removed the back panel off the stove, removed four screws and unplugged the controller. It was so quick and easy. It took about five minutes to replace. Read more
Fix F11 error codes and power outage failures with this range control board. Controls oven temperature, modes, and timing. DIY install in 15-20 minutes.
I googled the error code and symptoms my oven was exhibiting to determine the solution and which parts to order. I needed a new control panel and chose also to replace the overlay that shows on the front of the stove. I could have reused the old one because I turned out to be able to remove it without damaging it. I just kept it in case I damage the new one in the future. The “fast” shipping (not overnight) option had the part delivered the next morning, which was a nice surprise. I felt... Read more
Fix F10 error codes, oven won't heat, or incorrect time display issues. This range clock timer control board typically takes 1 hour to install.
Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on. Read more
Fix oven not heating, error codes, or beeping issues with this range control board. Manages temperature settings and oven functions. 25-minute DIY repair.
Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more
Fix F10 error codes, blank displays, or temperature fluctuations. This oven control board restores bake/broil cycles and keypad response in your range.
Replaced the control board. Read more
Oven won't heat to set temperature or display shows error codes? This electronic control board manages bake/broil circuits and clock functions. DIY repair.
Fix a blank display, beeping error codes, or non-working oven timer with this range clock control board. Most DIYers complete this repair in 15 minutes.
I looked up and ordered a new display panel. Since it was not showing anything I was hoping something on the board just failed. When I got the new part I plugged it in and it has been working fine since. I wish I could have found some trouble shooting options for this type of problem but I could not find anything related to a blank display. Like I said fortunately the new panel worked. Iremember it took about 4 days to get the part which was not bad considering I did not want to pay for... Read more
Fix F11, F14, or E15 error codes and unresponsive controls. This electronic control board restores oven temperature regulation and display functions.
My induction slide-in range was getting an E15 error code. First thing to do is look in the service manual, which should be in a plastic pocket at the back of the oven. I eventually did do that, but first I googled it. First, power cycle the stove, i.e. turn off the breaker, wait a minute, then turn it back on. That fixed it for a few months, but then it started doing it again, except now it only took a minute for the oven to beep E15 after turning the breaker back on. The service manual... Read more
Fix E15 error codes, blank displays, or unresponsive controls with this range electronic control board. Restores oven heating and timer functions.
New circuit board. Read more
Fix display issues, unresponsive controls, or oven overheating with this electronic control board. Manages bake/broil functions and timing display.
Unplugged oven and removed back panel of oven, found schematics taped to back of oven. Found a relay board that was burned where upper heating element plug connected to it. Replaced relay board and then repaired burned connector by replacing the spade terminal ends that were melted. Suspect connection was loose and that caused board damage. The other board i replaced because some display segments had stopped working with oven temperature. Was difficult to see what temp the oven was. This was a... Read more
Fixes E15 and F14 error codes with constant beeping. This control board manages bake/broil functions and temperature. Moderate DIY, 30-45 minutes.
I replaced the interface board that connected stove top to the elements. I was a little worried because some online message boards reported the same problem and the problem did not clear when they replaced the board. I ordered the board on Thursday afternoon and it was delivered to my home Saturday afternoon. I installed the new board Saturday night and oven is working like new. I thank you for your excellent service. Read more