Parts for Ge CDW9380N20SS: 01 - Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Water hardness test strip tool for dishwashers. Tests mineral content in tap water to help determine optimal detergent and rinse aid settings.

Replacement handle bracket for your dishwasher. Secures the door handle assembly to the door panel. Order when bracket is cracked, broken, or missing.

Set screw secures refrigerator door handles in place. Replace if lost, stripped, or missing after repairs. Requires hex wrench for installation.

Fix a loose, broken, or missing dishwasher door handle. This replacement handle restores proper opening and closing. Simple DIY installation.

Fix a loose, broken, or missing dishwasher door handle. This replacement handle restores proper opening and closing. Simple DIY installation.

Replace your broken or cracked dishwasher handle end cap to restore secure operation. Simple DIY fix—installs in minutes with basic tools.

Replacement mounting screw for dishwashers. Secures components and panels inside the unit. Order a new screw if yours is stripped, missing, or damaged.

This control panel keypad lets you enter cook settings and commands so your oven responds correctly to touch inputs. A direct-replacement user interface for restoring responsive button control and basic front-panel operation. What it does:

• Provides the front-panel buttons for selecting bake, broil, timers and other oven functions
• Sends user button presses to the appliance control so selected cycles start or change
• Fixes unresponsive, sticky, or missing button input when the keypad is the faulty component
• Restores normal tactile feedback and front-panel input recognition when replaced

• Disconnect power to the appliance before accessing the control area to avoid shock or damage
• Follow OEM disassembly steps for removing the control panel; handle the keypad and ribbon connector carefully
• Verify connector seating and alignment before reassembly; do not force connectors
• Test the control board and wiring harness for faults

The Blower Motor Assembly is an OEM part for GE dishwashers. This part is responsible for driving the dishwasher's venting system, which plays a key role in the drying process of your dishes.

Over time, the Blower Motor Assembly may need replacement due to wear and tear, damage, or failure. A malfunctioning blower motor can lead to ineffective drying of dishes, increased cycle times, or the dishwasher failing to complete its drying cycle properly.

Symptoms of a bad Blower Motor Assembly include:

• Dishes remaining damp or wet even after the drying cycle is complete.
• Unusual noises coming from the dishwasher, indicating that the blower motor is struggling to operate.
• The dishwasher stopping or pausing during the drying cycle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Stainless steel toekick panel that covers the base of your dishwasher. Replace if cracked, dented, discolored, or missing for a complete appearance.

Dishwasher mounting screw used to secure internal components and panels. Replace if screw is stripped, missing, or damaged during appliance repair.

Left-hand door hinge assembly for dishwashers. Installs on the left side to support and secure the door to the cabinet. Replace if bent, broken, or worn.

Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This assembly secures the door and engages the safety switch. DIY fix.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Size: 10-32GX FLT25 .615 S

Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.

Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.

Secures the detergent dispenser to the dishwasher inner door panel. Replace if cracked, broken, or rusted to restore proper alignment and mounting.

The GE screw is an OEM replacement part responsible for securing various components and parts of the dishwasher together. The screw is designed to provide a tight and secure connection for different panels, brackets, or other elements within the dishwasher. It plays a crucial role in maintaining the structural integrity of the appliance by preventing loose parts.

Common causes of a bad screw can include regular wear and tear from frequent use, exposure to moisture leading to corrosion, or damage from over-tightening. A compromised screw can result in loose or unstable components, which can affect the dishwasher's performance and safety.

Symptoms of a bad screw include:

• Loose or wobbly components within the dishwasher
• Difficulty in securing parts properly
• Visible rust or corrosion on the screw
• The screw head being stripped or damaged

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.

Replacement vent bracket assembly for your dishwasher. Secures the vent duct system in place. Order a new bracket if yours is cracked, broken, or missing.

Replacement mounting screw for dishwasher door panels, control assemblies, and internal components. Needed when original screws are stripped, rusted, or missing.

Size: 8-18 x 7/8 inch.

This vent flapper is the exterior exhaust flap that opens to let dryer air and lint exit and closes to keep weather, pests and drafts out when the dryer is off. It restores proper airflow at the outside vent hood. What it does:

• Opens with dryer airflow to allow exhaust to escape and closes when idle to block outside air.
• Helps prevent backdrafts, pests and rain from entering the vent system.
• Can restore normal drying performance when a stuck or broken flap was restricting airflow.
• Commonly replaced when the flap is cracked, warped, jammed or does not seal.

• One vent flapper/exterior exhaust flap.

• Disconnect power to the dryer (and gas supply if applicable) and work from the outside hood when possible.
• Remove the exterior vent hood or access cover to inspect and replace the flap; basic hand tools required.
• Check that the flap moves freely after installation and seats against its seal to prevent air leaks.
• Clean or repair the ductwork to avoid repeat failures.

Cap assembly for dishwasher door. Installs on the interior door panel to seal openings. Replace if cap is missing, cracked, or broken during shipping.

This lock nut assembly kit replaces a worn or missing locking nut that secures threaded fasteners on dishwasher components. It restores secure fastening to help stop movement, noise, or loose panels. What it does:

• Provides a threaded locking nut that holds mating fasteners in place on dishwasher assemblies
• Helps prevent loosening from vibration that can cause rattling or misalignment
• Commonly used where a nut must resist backing off without adhesive
• Compatible with the original mounting locations that use a captive/locking nut design

• Disconnect power to the dishwasher before accessing internal components
• Verify you are replacing the exact nut for the affected mounting point; hand-start threads to avoid cross-threading
• Tighten securely but avoid overtightening to prevent thread or component damage
• Keep track of screws and fasteners and test operation after reassembly

This module control assembly is the appliance's main electronic control board that manages cycle selection, timing and user inputs. Replacing a faulty control can restore correct cycle operation and user-interface response. What it does:

• Acts as the main electronic control for cycle sequencing, timing and user commands.
• Interprets user inputs and starts/stops functions such as fill, agitate and spin.
• Faulty units can cause unresponsive controls, cycles that won't start or advance, or erratic behavior.
• Works with other appliance systems to coordinate normal wash cycles and error reporting.

What's included: Includes: 1 module control assembly Install notes:

• Disconnect power to the appliance before attempting replacement to avoid shock.
• Handle the module as a static-sensitive electronic component; avoid touching circuit traces and connectors.
• Verify connector orientation and seating; reuse original mounting hardware unless replacements are specified.

Grinding noise during drying cycle? This vent door actuator opens and closes the dishwasher vent for proper airflow. Easy DIY fix, one screw install.

Includes 12 screws.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.