Parts for Ge GLDT690D00BB: 01 - Escutcheon & Door Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Replace your dishwasher's ring nut with gasket if the original is cracked, worn, or missing. Secures components and ensures a proper seal.

Dishwasher duct vent and gasket assembly that directs air flow during drying cycles. Replace if cracked, damaged, or missing to restore proper ventilation.

Secures the dishwasher door handle to the panel. Replace if your bracket is cracked, broken, or missing and the handle feels loose or unstable.

Replacement door hinge pin for dishwashers. Serves as the pivot point for smooth door opening and closing. Replace if worn, missing, or broken.

Fix a cracked, loose, or broken dishwasher door handle. This handle assembly restores a secure grip and professional appearance. Easy installation.

This is the front-facing escutcheon panel that covers the dishwasher's control area on the door. It houses the touch pad buttons and provides a finished appearance to the control interface. Replace this part if the panel is cracked, discolored, or if buttons are sticking or unresponsive due to physical damage to the escutcheon.

Outer door panel for your dishwasher. Replaces a cracked, damaged, or discolored front exterior panel. Restores the cosmetic appearance of your unit.

Secures and guides your dishwasher door for smooth opening and closing. Replace this hinge assembly if yours is worn, damaged, or causing door misalignment.

This is a hinge spring. This piece applies tension when opening and closing a dishwasher door. The hinge spring prevents the from door dropping too quickly and hitting the ground when the machine is opened. This hinge also ensures that the door is completely shut and that there are no leaks during the washing cycle.If the door frequently falls open, will not stay closed, or will not latch this part may need to be replaced. The repair is fairly easy, but care should be taken because the hinge holds tension and may snap while being replaced. Keep in mind many dishwashers have springs on both sides of the door, so make sure to verify if the machine needs one or two replacements. This is an OEM part sourced directly from the manufacturer. It is sold individually. This part is compatible with machines from manufacturers like General Electric and their brands Hotpoint, and RCA.

Left-side hinge assembly secures and supports your dishwasher door for smooth opening and closing. Replace if worn, damaged, or broken to restore alignment.

Dispenser won't open during wash cycle? This detergent dispenser restores reliable soap release and rinse-aid dosing. Moderate DIY repair with video.

Dishwasher O-ring seal prevents leaks in pump and valve assemblies. Replace when worn, cracked, or causing water leaks. Verify fit with your model number.

Protective cover for dishwasher power board. Shields electrical components from debris and accidental contact. Replace if cracked, broken, or missing.

Structural bracket that secures the detergent dispenser assembly in your dishwasher. Replace if the original bracket is cracked, broken, or missing.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

M5 x 10mm mounting screw for dishwashers. Secures internal components and panels. Replace if stripped, missing, or corroded during repairs or maintenance.

A replacement joint pin that secures a hinge or linkage, restoring stable door or panel movement. Use this durable metal pin to fix loose, sagging, or misaligned doors and ensure reliable operation. What it does:

• Acts as the pivot/fastener for a hinge or linkage assembly to maintain correct alignment and motion
• Restores secure door or panel attachment when the original pin is worn or missing
• Helps eliminate sagging, rubbing, or uneven closing caused by a broken or loose pivot
• Works with the associated hinge and bracket to keep moving parts aligned during normal use

• Designed for direct replacement—remove the old pin and press or slide the new pin into the hinge or linkage assembly
• Use basic hand tools; wear gloves and eye protection to avoid injury from sharp edges or slipping tools
• Do not force damaged hinge parts—replace any broken brackets or worn components for a secure repair

Replace a missing, damaged, or worn spring washer in your dishwasher. Provides tension to keep fasteners secure during vibration and movement.

This ST3.5 tapping screw is a factory-style fastener used to secure appliance panels, trim, and components where a self-tapping thread is required. It provides a reliable hold for repairs and replacement parts. What it does:

• Creates its own mating threads in sheet metal or plastic to fasten panels and brackets
• Commonly used to secure control panels, trim pieces, and interior components
• Helps stop rattles and loose panels when the original screw is missing or damaged
• Matches OEM fit and function for straightforward replacement

• Use the correct ST3.5 screwdriver or bit to avoid cam-out and damage
• Start straight and apply steady pressure; do not force if resistance indicates wrong thread fit
• Avoid over-tightening to prevent stripping the mating material or breaking the screw
• Wear eye protection and follow appliance power/disconnect safety before servicing

Left switch breakwater bracket secures console switch assembly in dishwasher door. Replace if cracked, broken, or missing to restore proper alignment.

Dishwasher won't start or stops mid-cycle? This door latch microswitch signals the control when the door is securely closed. DIY-friendly repair.

Black power button for dishwasher control panel. Replaces cracked, faded, or missing button. Installs in front panel control assembly for clean look.

Black delay start button for dishwasher control panels. Replaces cracked, worn, or missing buttons to restore tactile feedback and delayed-start functionality.

This handle cover is a cosmetic trim piece that restores the look of a refrigerator door and protects the underlying handle hardware from wear. It replaces a faded, cracked or chipped cover to give the door a finished appearance. What it does:

• Covers and protects the exposed portion of the refrigerator door handle
• Restores door appearance when the original cover is scratched, cracked or discolored
• Keeps dirt and grime off the handle mounting area for easier cleaning
• Matches original black finish for a seamless look

• High-level install: remove the existing cover and snap or slide the replacement into place; follow your model's disassembly steps
• Disconnect power or follow manufacturer safety guidance if removing nearby trim or door panels
• Use non-marring tools to avoid scratching surrounding surfaces
• If screws or clips are present, keep track of hardware; replace only with manufacturer-specified parts

This white replacement handle cover restores the exterior look and protects the underlying handle on compatible refrigerators. It provides a clean finished appearance and covers worn or cracked handle surfaces. What it does:

• Replaces a cracked, faded, or chipped refrigerator handle cover to improve appearance.
• Shields the actual handle from everyday wear, spills, and grime.
• Fits over the existing handle assembly to restore a finished exterior.
• Helps eliminate rough edges or cosmetic damage that can catch on clothing.

• Designed to snap or slide onto the existing handle; no special tools usually required.
• Turn off power to the appliance only if required by your model's disassembly instructions (most cosmetic covers do not require power removal).
• Handle fasteners or the underlying handle may need to be removed first—keep screws and small parts in a safe place.

Replace your dishwasher's worn, cracked, or missing control panel select button. This white control button installs on the front panel interface.

Replace a cracked, worn, or missing black select button on your dishwasher control panel. Restores easy operation for choosing settings and cycles.

Replace your dishwasher's control panel touch pad when buttons become unresponsive, the overlay is cracked, or the keypad membrane is worn or damaged.

Replace your dishwasher's control panel touch pad when the keypad surface is cracked, worn, faded, or unresponsive. Installs on the front control panel.

This right switch breakwater helps position and protect the dryer control switch assembly, keeping the switch secure and preventing rubbing or shorting. It restores stable switch alignment for reliable control operation. What it does:

• Holds the right control switch in place to prevent movement and wear
• Protects the switch from contact with adjacent components that can cause sticking or intermittent operation
• Helps stop rattling or vibration-related noise from the control area
• Supports proper button/knob actuation for consistent user input

• One right switch breakwater

• Intended for use in the dryer control area; inspect surrounding parts for related damage
• Disconnect power before servicing to avoid shock or accidental startup
• Use basic hand tools; do not overtighten fasteners to avoid cracking the plastic
• Replace damaged switches or mounting hardware together for best results

A standard M5 x 20 mm machine screw used to fasten panels and components in appliances. Replaces worn or missing screws to restore secure mounting and help prevent rattling or loose parts. What it does

• Secures panels, brackets, or assemblies where an M5 x 20 mm fastener is specified
• Restores proper fit and alignment for trimmed panels and internal components
• Helps stop vibration-related noise caused by loose fasteners
• Matches OEM thread size and length for a direct-fit replacement

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when snug to avoid damaging threads or part mounting points
• Replace any corroded or damaged mating nuts or clips for best results

The Latch Assembly is an OEM part for GE dishwashers. This part secures the dishwasher door during operation, ensuring that the door remains tightly closed to prevent water leaks and to allow the dishwasher to operate correctly.

Common causes of a bad latch assembly include wear and tear from regular use, damage from forceful closing or impacts, and issues with the internal mechanism or switches.

Symptoms of a bad Latch Assembly include:

• The dishwasher door not closing or latching properly
• The dishwasher not starting or pausing mid-cycle due to the door not being securely latched
• Water leaking from the door during operation
• The door popping open during a cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.