Parts for Bosch WFMC1001UC/02: Facia Panel / Control Module Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This interference capacitor reduces electrical noise and helps protect the appliance's control circuitry from voltage spikes. It's a direct-replacement noise suppressor used where EMI/RFI filtering is required for reliable operation. What it does:

<

Fix a washer that won't start, stops mid-cycle, or shows error codes with a new control module. This electronic board manages all wash functions.

Control panel fascia with knobs for your washer. Replaces the front panel covering that may be cracked, scratched, discolored, or missing knobs.

Cable harness for washers. Connects electrical components inside the machine. Replace if wires are damaged, frayed, or connections are loose or broken.

Rear case panel for washers. Covers and protects internal components at the back of the machine. Replace if cracked, damaged, or missing.

Shipping bolt kit secures washer drum during transport. Includes bolt, washer, and sleeve. Replace if missing, stripped, or lost before moving your washer.

This cover protects internal components and provides a finished appearance. Replace if cracked, broken, or missing to restore proper enclosure.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the m

2 included - Front load

Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.

The Lock is an OEM replacement part for Bosch front-loading washers. Securing mechanisms through customized openings prevents loads from rolling freely during spinning, maintaining optimal programmed processes. Reliable retention enhances cleaning consistency.

Causes of a bad lock can involve deterioration of locking pawls or supporting rails over many cycles of engaging and disengaging weekly. Protruding lock parts also risk impact damage from overfilled loads.

Symptoms of a bad lock include: 

• Inability to prevent tub contents from spinning unrestrained   
• Loose articles migrating from their intended placement within  
• Door failures to lock closed fully during active cycles
• Premature component wear transferring vibrations to cabinetry

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This suspension rod supports and stabilizes the washer drum assembly. Replace if your rod is bent, broken, or missing to restore proper drum support.

Replaces a broken, cracked, or worn washer door hinge. This pivoting component attaches the door to the machine body for smooth opening and closing.

Replacement mounting screw for dryers and washers. Secures panels, brackets, and trim pieces. Restores snug fit when original fastener is stripped or missing.

This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.

• Acts as a bushing/spacer around a p

The Cover is an OEM part for Bosch washing machines. This part covers and protects the door hinge mechanism, maintaining the sleek appearance of the appliance while preventing dust, lint, and moisture from compromising the hinge's functionality. &n

Fix a washer that won't start or stops mid-cycle with a faulty door lock. This mechanical locking assembly secures the door during wash cycles.

Hook plate for washer models. Secures internal components in place. Replace if cracked, broken, or missing to restore proper assembly and function.

Replacement screw secures appliance panels, brackets, and internal components. Install when original is stripped, missing, or corroded for proper alignment.

Replaces the outer door panel on your washer. Install when dented, scratched, or corroded to restore appearance and ensure proper door closure and seal.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Flat mounting washer that sits under screws or bolts to distribute load and maintain proper spacing. Replace if cracked, bent, or missing.

Mounting bracket for washer installations. Secures and stabilizes washer components. Replace if bent, cracked, or broken to restore proper support.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

Replacement support bracket for your washer. Installs to secure internal components. Needed when original is cracked, broken, or missing during repairs.

The Tank Spring is an OEM part for Bosch washing machines. It is located within the central support assembly below the washer tub. The spring provides counterbalancing tension to assist the tub during movement and rotation.

Causes can be fatigue from years of use, mineral buildup hindering spring function, or damage such as cracks or breaks in the spring coil.

Symptoms of a bad tub support spring include:

• Excessive vibration or off-balance loads during spin cycles
• Noisy squeaking or grinding sounds from central support area
• Difficulty lifting or rotating the tub for loading/unloading

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement mounting screw for washers. Secures panels, brackets, and components in place. Replace when stripped, missing, or damaged during repairs.

Drive pulley for washer drum and motor belt system. Replaces worn, cracked, or damaged pulleys that cause belt slippage or wobbling during operation.

Spring tank secures and positions an appliance tension spring to maintain proper movement and balance for a door or other moving assembly. Replacing a worn or broken tank restores correct spring alignment and smoother, more reliable operation. What it do

Structural holder component for front-load washers. Secures internal parts in place. Replace if cracked, broken, or missing to restore proper assembly.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Prevents water leaks where the drum connects to the machine. Replace if you notice leaking or bearing noise. Confirm fit with your model number.

Outer tub seal creates a watertight barrier between tub halves to prevent leaks. Replace if you notice water pooling or leaking during wash cycles.

Seals washer door to prevent water leaks during wash cycles. Replace if torn, cracked, or moldy. Confirm fit with your model number before ordering.

Secures the door boot to the tub on front-load washers. Replace if you notice increased vibration, noise, or water leaks. Confirm fit with your model.

Secures the door boot gasket to the washer tub. Replace if stretched, rusted, or causing leaks. Confirm fit with your Bosch front-load washer model.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

Replacement screw for washer assembly. Used to secure internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.

A bad drive motor can occur due to electrical faults, mechanical issues, or

This rear drum motor mounting bushing supports the motor shaft at the back of the tub, keeping the drum aligned and reducing wear. It restores smooth drum rotation and helps reduce noise and vibration when functioning properly. What it does:

• Cen

Controls drum movement and reduces vibration during the spin cycle. Replace if worn, cracked, or causing excessive bouncing to restore stability.

Fix a washer that won't heat water properly or stops mid-cycle with error codes. This temperature sensor monitors and regulates water temperature accurately.

Cable harness for washer electrical connections. Replace if wires are damaged, frayed, or connectors are broken. Restores proper wiring between components.

Cable harness for washers. Connects electrical components and control systems. Replace if wires are frayed, damaged, or connections are loose or broken.

Cable harness for washer control panel and electrical connections. Replace if damaged, frayed, or has broken connectors affecting wire routing.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Secures and supports internal components in your washer. Replace if the holder is cracked, broken, or missing to restore proper assembly and function.

This replacement hose connects the dishwasher drain/sump to the drain system, restoring proper water removal and preventing leaks or standing water. It's a direct-fit service part when the original hose is cracked or clogged. What it does

• Carrie

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the m

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

The Cold Water Inlet Hose is an OEM replacement part for Bosch washing machines. It serves as a flexible supply line that delivers cold water from an external plumbing source directly to the washer. This hose plays an important role in providing a balanced mix of hot and cold water flow into the unit.

Symptoms of a bad cold water inlet hose include:

• Fluctuations in water temperature during cycles  
• Issues with certain temperature settings like warm or cold not operating properly
• Visible cracking, kinking, or leaking along the hose body
• No water flow or pressure at the cold supply 

Causes of a failed cold water inlet hose can be mineral deposits clogging the line, natural wear and tear over time, or physical damage from crushing or abrasive surfaces compromising its integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, e

The Hot Water Inlet Valve is an OEM part for Bosch washing machines. It regulates the entry of hot water into the machine, crucial for cycles requiring warm or hot washes. Activated by the machine's control system, this valve opens at the precise m

Connects and directs incoming water from the fill hose into your washer. Replace if you notice leaks at the hose connection or reduced water flow during fill cycles.

This hose inlet is the water inlet connection that directs incoming water into the appliance, restoring a secure supply path and helping prevent leaks at the entry point. What it does

• Provides the sealed connection point for the incoming water supply hose.
• Routes water into the appliance's fill system so cycles can start and run properly.
• Helps prevent leaks where the external supply hose attaches.
• Commonly replaced when water won't enter, the connection leaks, or the inlet is damaged.

• One hose inlet connection.

• Turn off the water supply and disconnect power before replacing.
• Inspect existing seals or gaskets; replace if cracked or worn.
• Tighten connections to hand-firm plus a quarter turn; avoid overtightening.
• After installation, restore water and power and check thoroughly for leaks during a fill cycle.

Fix washer leaks or uneven water flow with this T-connector. Joins three water lines to restore proper distribution. Simple DIY repair.

Inlet hose for washers. Connects water supply to the machine. Replace if cracked, leaking, kinked, or worn to restore proper water flow to your washer.

Secures washer hoses to direct water flow properly. Replace if leaking, loose, or showing wear from age or chemical exposure. Confirm fit with model.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

Directs water from your home supply into the washer. Replace if cracked or leaking to restore proper fill and prevent water damage. Confirm fit with your model.

Secures water hoses in your washer to prevent leaks. Replace if cracked, rusted, or causing drips. Verify fit with your model number before ordering.

Secures washer hoses to prevent leaks. Replace if loose, cracked, or causing water leakage during wash cycles. Verify fit with your model number.

Fix washer overfilling or not filling properly with a new pressure switch. Monitors water levels during fill cycles. Common DIY repair for fill issues.

If your washer isn't heating water properly or cycles run incorrectly, the temperature sensor may have failed. This thermistor monitors water temp.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Fix washer overfilling or fill errors with this pressure chamber hose. Restores proper water level sensing by connecting the sump to the pressure chamber.

Fix washer water level issues or won't fill correctly with a new pressure chamber. This part regulates water sensing for proper fill cycles.

Secures washer hoses to prevent leaks. Replace if cracked, loose, or causing water seepage. Verify compatibility with your washer model before ordering.

Secures hoses in your washer to prevent leaks. Replace if loose, corroded, or leaking at connections. Verify fit with your model number before ordering.

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the m

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.