Parts for Bosch WFMC2201UC/02: Facia Panel Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

This interference capacitor reduces electrical noise and helps protect the appliance's control circuitry from voltage spikes. It's a direct-replacement noise suppressor used where EMI/RFI filtering is required for reliable operation. What it does:

• Suppresses electromagnetic and radio-frequency interference that can affect controls and electronics
• Helps prevent false signals or erratic behavior caused by electrical noise
• Supports stable operation of motors and electronic control boards
• Can reduce audible electrical noise or interference-related symptoms

• Disconnect power at the breaker before inspecting or replacing the capacitor
• Discharge the capacitor and avoid touching terminals; use insulated tools
• Verify wiring match and polarity before connecting

This electronic module manages all washer functions and cycles, typically located behind or beneath the control panel. Replace it when wash cycles won't start, stop mid-cycle, or when the washer becomes completely unresponsive to controls.

Replacement fascia panel that covers the control area on your washer. Restores the front trim when the original is scratched, dented, cracked, or broken.

Cable harness for washers. Connects electrical components inside the machine. Replace if wires are damaged, frayed, or connections are loose or broken.

Rear case panel for washers. Covers and protects internal components at the back of the machine. Replace if cracked, damaged, or missing.

Shipping bolt kit secures washer drum during transport. Includes bolt, washer, and sleeve. Replace if missing, stripped, or lost before moving your washer.

This cover protects internal components and provides a finished appearance. Replace if cracked, broken, or missing to restore proper enclosure.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

2 included - Front load

Adjustable leveling foot that installs on the bottom of your washer to provide stable support. Replace when cracked, worn, or missing to restore balance.

The Lock is an OEM replacement part for Bosch front-loading washers. Securing mechanisms through customized openings prevents loads from rolling freely during spinning, maintaining optimal programmed processes. Reliable retention enhances cleaning consistency.

Causes of a bad lock can involve deterioration of locking pawls or supporting rails over many cycles of engaging and disengaging weekly. Protruding lock parts also risk impact damage from overfilled loads.

Symptoms of a bad lock include: 

• Inability to prevent tub contents from spinning unrestrained   
• Loose articles migrating from their intended placement within  
• Door failures to lock closed fully during active cycles
• Premature component wear transferring vibrations to cabinetry

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This suspension rod supports and stabilizes the washer drum assembly. Replace if your rod is bent, broken, or missing to restore proper drum support.

Replaces a broken, cracked, or worn washer door hinge. This pivoting component attaches the door to the machine body for smooth opening and closing.

Replacement mounting screw for dryers and washers. Secures panels, brackets, and trim pieces. Restores snug fit when original fastener is stripped or missing.

This sleeve is a small guide/bushing used in select Bosch-built appliances. It spaces and supports a moving component to keep it aligned and reduce friction, helping the mechanism operate smoothly and quietly.

• Acts as a bushing/spacer around a pin or shaft to guide motion
• Helps maintain alignment of connected parts
• Reduces friction and wear between mating surfaces
• A worn or missing sleeve can cause wobble, rough movement, or squeaking/clicking noises

• Disconnect power and shut off water before servicing
• Note the sleeve's orientation and seated depth during removal to match on installation
• Inspect the mating pin/shaft and surrounding parts; replace if worn for best fit
• Verify smooth movement by hand before reassembly and testing

The Cover is an OEM part for Bosch washing machines. This part covers and protects the door hinge mechanism, maintaining the sleek appearance of the appliance while preventing dust, lint, and moisture from compromising the hinge's functionality.  

Causes for the need to replace the Cover often stem from physical impacts during loading or unloading, general wear over time, or exposure to harsh cleaning chemicals that can degrade the material of the cover.

Symptoms of a bad Cover include:

• Visible cracks or breakage that can lead to moisture and debris entering the hinge area.
• A loose fit, which may cause noise during operation or interfere with the door's ability to close properly.
• Wear and tear that diminishes the aesthetic appeal of the appliance, making it look outdated or poorly maintained.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Fix a washer that won't start or stops mid-cycle with a faulty door lock. This mechanical locking assembly secures the door during wash cycles.

Hook plate for washer models. Secures internal components in place. Replace if cracked, broken, or missing to restore proper assembly and function.

Replacement screw secures appliance panels, brackets, and internal components. Install when original is stripped, missing, or corroded for proper alignment.

Replaces the outer door panel on your washer. Install when dented, scratched, or corroded to restore appearance and ensure proper door closure and seal.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Flat mounting washer that sits under screws or bolts to distribute load and maintain proper spacing. Replace if cracked, bent, or missing.

Mounting bracket for washer installations. Secures and stabilizes washer components. Replace if bent, cracked, or broken to restore proper support.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

Replacement support bracket for your washer. Installs to secure internal components. Needed when original is cracked, broken, or missing during repairs.

The Tank Spring is an OEM part for Bosch washing machines. It is located within the central support assembly below the washer tub. The spring provides counterbalancing tension to assist the tub during movement and rotation.

Causes can be fatigue from years of use, mineral buildup hindering spring function, or damage such as cracks or breaks in the spring coil.

Symptoms of a bad tub support spring include:

• Excessive vibration or off-balance loads during spin cycles
• Noisy squeaking or grinding sounds from central support area
• Difficulty lifting or rotating the tub for loading/unloading

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement mounting screw for washers. Secures panels, brackets, and components in place. Replace when stripped, missing, or damaged during repairs.

Drive pulley for washer drum and motor belt system. Replaces worn, cracked, or damaged pulleys that cause belt slippage or wobbling during operation.

Spring tank secures and positions an appliance tension spring to maintain proper movement and balance for a door or other moving assembly. Replacing a worn or broken tank restores correct spring alignment and smoother, more reliable operation. What it does:

• Holds the end of the tension spring and keeps it aligned in the assembly.
• Maintains correct spring tension so doors or panels open, close and remain balanced.
• Prevents spring detachment that can cause sudden drops, misalignment or noisy operation.
• Common symptoms of a failing tank: door drops or won't stay open, uneven closing, rattling or banging during movement.

• Disconnect power to the appliance before starting any repair to avoid electrical hazards.
• Support the door or moving panel while replacing the tank to prevent sudden movement or injury.
• Use the OEM part orientation and hardware; inspect the spring and mounting points for wear and replace if scored or damaged.
• Test the door/panel operation several times after installation to ensure correct tension and secure mounting.

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

Structural holder component for front-load washers. Secures internal parts in place. Replace if cracked, broken, or missing to restore proper assembly.

This is the main washing drum where clothes are cleaned during wash cycles. It rotates to agitate and tumble clothing through the wash and spin cycles. Replace this drum if it's cracked, rusted, or damaged, causing clothes to snag or the washer to be unbalanced.

Prevents water leaks where the drum connects to the machine. Replace if you notice leaking or bearing noise. Confirm fit with your model number.

Outer tub seal creates a watertight barrier between tub halves to prevent leaks. Replace if you notice water pooling or leaking during wash cycles.

This is the main washing drum where clothes are cleaned during wash cycles. It rotates to agitate and tumble clothing through the wash and spin cycles. Replace this drum if it's cracked, rusted, or damaged, causing clothes to snag or the washer to be unbalanced.

Seals washer door to prevent water leaks during wash cycles. Replace if torn, cracked, or moldy. Confirm fit with your model number before ordering.

Secures the door boot to the tub on front-load washers. Replace if you notice increased vibration, noise, or water leaks. Confirm fit with your model.

Secures the door boot gasket to the washer tub. Replace if stretched, rusted, or causing leaks. Confirm fit with your Bosch front-load washer model.

This washing machine balance counterweight is a heavy concrete block attached to the left side of the washer tub to reduce vibration during spin cycles. It helps keep the machine stable and prevents excessive shaking or walking across the floor. Replace this counterweight if it's cracked, broken, or if your washer vibrates excessively or moves during operation.

Washer fixing kit secures internal components and prevents vibration or movement. Replace if parts are loose or machine rattles. Confirm fit with your model.

Replacement screw for washer assembly. Used to secure internal components and panels. Order a new screw if yours is stripped, missing, or damaged.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.

The Drive Motor is an OEM replacement part for Bosch washing machines. This powerful motor is responsible for driving the drum rotation during the wash and spin cycles.

A bad drive motor can occur due to electrical faults, mechanical issues, or normal wear and tear over time. Signs of a faulty drive motor include the drum not spinning or agitating, unusual noises coming from the motor, or the washer not starting at all.

Symptoms of a bad drive motor include:

• The drum not spinning or agitating  
• Unusual noises
• The washer not starting  

Replace your faulty washer drive motor with this genuine OEM Bosch part to restore your washing machine. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This is a mounting holder used inside a washing machine to secure internal components in place. It provides structural support and helps maintain proper alignment during operation. Replace this holder if it is cracked, worn, or broken, which can cause excessive vibration, unusual noises, or misalignment of internal parts.

Controls drum movement and reduces vibration during the spin cycle. Replace if worn, cracked, or causing excessive bouncing to restore stability.

Fix a washer that won't heat water with this heating element. Common solution for cold wash cycles and poor cleaning results. Moderate DIY repair.

Fix a washer that won't heat water properly or stops mid-cycle with error codes. This temperature sensor monitors and regulates water temperature accurately.

Cable harness for washer electrical connections. Replace if wires are damaged, frayed, or connectors are broken. Restores proper wiring between components.

Cable harness for washers. Connects electrical components and control systems. Replace if wires are frayed, damaged, or connections are loose or broken.

Cable harness for washer control panel and electrical connections. Replace if damaged, frayed, or has broken connectors affecting wire routing.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Plastic baffle installs on the inner drum rim to lift and tumble clothes during wash cycles. Replace if cracked, broken, or missing pieces.

Secures and supports internal components in your washer. Replace if the holder is cracked, broken, or missing to restore proper assembly and function.

This replacement hose connects the dishwasher drain/sump to the drain system, restoring proper water removal and preventing leaks or standing water. It's a direct-fit service part when the original hose is cracked or clogged. What it does

• Carries waste water from the dishwasher sump to the household drain or disposal
• Restores proper draining when a split, collapsed, or clogged hose causes standing water
• Helps stop leaks and puddling that can occur from worn or damaged hose sections
• Maintains correct flow to prevent dishwasher error codes related to drainage

• Turn off power and water supply to the appliance before starting any repair
• Inspect hose routing and clamps; replace any damaged clamps or retainers for a secure seal
• Ensure hose connections are tight and routed without kinks to allow proper drainage

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

The Cold Water Inlet Hose is an OEM replacement part for Bosch washing machines. It serves as a flexible supply line that delivers cold water from an external plumbing source directly to the washer. This hose plays an important role in providing a balanced mix of hot and cold water flow into the unit.

Symptoms of a bad cold water inlet hose include:

• Fluctuations in water temperature during cycles  
• Issues with certain temperature settings like warm or cold not operating properly
• Visible cracking, kinking, or leaking along the hose body
• No water flow or pressure at the cold supply 

Causes of a failed cold water inlet hose can be mineral deposits clogging the line, natural wear and tear over time, or physical damage from crushing or abrasive surfaces compromising its integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.

The Cold Water Inlet Valve is an OEM part for Bosch washing machines. It is designed to regulate the flow of cold water into the washing machine during the wash cycle. This valve operates based on signals from the washing machine's control board, ensuring the right amount of cold water is provided.

Causes of a faulty cold water inlet valve can include wear and tear over time, clogs or blockages in the valve, electrical issues, or valve failure.

Symptoms of a bad cold water inlet valve may include:

• Insufficient or no cold water flow into the washing machine
• Leaking or dripping water from the valve during the wash cycle
• Inconsistent or inadequate water supply for washing clothes
• Error codes related to water supply or filling

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: For the Hot Water Valve, order part number 00422245.

This is an electromagnetic water inlet valve that controls the flow of hot water into the washing machine. It opens when the washer calls for hot water during the wash or rinse cycle and closes when the cycle is complete. Replace this valve if the washer is not filling with hot water, fills slowly, leaks from the back of the machine near the hose connections, or continues to fill when the machine is off.

Connects and directs incoming water from the fill hose into your washer. Replace if you notice leaks at the hose connection or reduced water flow during fill cycles.

This hose inlet is the water inlet connection that directs incoming water into the appliance, restoring a secure supply path and helping prevent leaks at the entry point. What it does

• Provides the sealed connection point for the incoming water supply hose.
• Routes water into the appliance's fill system so cycles can start and run properly.
• Helps prevent leaks where the external supply hose attaches.
• Commonly replaced when water won't enter, the connection leaks, or the inlet is damaged.

• One hose inlet connection.

• Turn off the water supply and disconnect power before replacing.
• Inspect existing seals or gaskets; replace if cracked or worn.
• Tighten connections to hand-firm plus a quarter turn; avoid overtightening.
• After installation, restore water and power and check thoroughly for leaks during a fill cycle.

Fix washer leaks or uneven water flow with this T-connector. Joins three water lines to restore proper distribution. Simple DIY repair.

Inlet hose for washers. Connects water supply to the machine. Replace if cracked, leaking, kinked, or worn to restore proper water flow to your washer.

Secures washer hoses to direct water flow properly. Replace if leaking, loose, or showing wear from age or chemical exposure. Confirm fit with model.

This fastening ring secures mating appliance components by locking parts in place to prevent movement or separation during operation. It's a simple yet essential hardware piece that helps maintain proper alignment and reliable function. What it does

• Holds mating parts together to prevent wobble, vibration, or dislocation
• Keeps seals and assemblies properly seated to reduce noise and misalignment
• Helps maintain correct component spacing for smooth operation
• Commonly replaced when the original ring is bent, worn, or missing

• Designed for use with compatible OEM assemblies; follow for correct placement
• Inspect mating surfaces and replace any damaged clips, seals, or gaskets before reassembly
• Use proper tools to avoid deforming the ring during installation; do not force into place
• Disconnect power and follow safety procedures before servicing the appliance

Directs water from your home supply into the washer. Replace if cracked or leaking to restore proper fill and prevent water damage. Confirm fit with your model.

Secures water hoses in your washer to prevent leaks. Replace if cracked, rusted, or causing drips. Verify fit with your model number before ordering.

Secures washer hoses to prevent leaks. Replace if loose, cracked, or causing water leakage during wash cycles. Verify fit with your model number.

Fix washer overfilling or not filling properly with a new pressure switch. Monitors water levels during fill cycles. Common DIY repair for fill issues.

This humidity sensor monitors moisture levels inside the washing machine during the wash and dry cycles. It helps the control board determine optimal cycle timing and performance. Replace this sensor if the washer is not properly detecting moisture levels, cycles run too long or too short, or if you receive error codes related to sensor malfunction.

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Fix washer overfilling or fill errors with this pressure chamber hose. Restores proper water level sensing by connecting the sump to the pressure chamber.

Fix washer water level issues or won't fill correctly with a new pressure chamber. This part regulates water sensing for proper fill cycles.

Secures washer hoses to prevent leaks. Replace if cracked, loose, or causing water seepage. Verify compatibility with your washer model before ordering.

Secures hoses in your washer to prevent leaks. Replace if loose, corroded, or leaking at connections. Verify fit with your model number before ordering.

This installation set provides the hardware needed to mount and connect a compatible appliance, helping ensure a secure fit and correct hookups during installation. Designed as the ready-to-use kit installers expect. What it does:

• Provides the mounting and connection hardware used during appliance installation
• Helps prevent loose fittings and reduce leaks caused by improperly secured components
• Useful when original installation parts are missing or damaged
• Supports a proper, stable installation for safe operation

• Follow the appliance's installation instructions and local codes when installing this kit
• Turn off power and water supply before beginning work
• Use appropriate tools and verify all connections are tight and leak-free after installation

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.