Parts for Kitchenaid KDTM804EBS0: 05 - Fill, Drain And Overfill Parts

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

Fix a dishwasher not filling with water by replacing the water level float lever. This lever regulates water levels and prevents leaks. Easy 15-minute DIY repair.

Delivers water from supply line to dishwasher tub. Replace if cracked, leaking, chewed by rodents, or damaged during installation or moving.

Fix a dishwasher that won't fill with water or fills intermittently by replacing the water inlet valve. This part regulates water flow during wash cycles.

Seals the water inlet connection to prevent leaks where water enters the dishwasher tub. Replace if you notice moisture damage or leaking at the valve inlet.

Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or leaking at the connection. Verify fit with your model.

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Leaks at the hose connection points
• Hoses slipping off the connections
• Visible rust or damage on the clamp
• Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Fix dishwasher not filling with water or slow fill issues. This inlet valve controls water flow into your dishwasher. DIY repair typically takes 15-30 minutes.

10 - 16 x 1/2

Bracket that secures the water level switch in your dishwasher. Replace if cracked, broken, or damaged, causing the switch to shift out of position.

Seals the float switch base to prevent leaks during dishwasher operation. Replace if water leaks from below the float assembly. Confirm fit with model.

The Nut is an OEM part for Whirlpool dishwashers. This nut secures the float switch, a key component in regulating the water level within the dishwasher. The float switch ensures your dishwasher does not overfill by triggering the water to stop once it reaches a certain level. 

Over time and with regular use, the nut that holds the float switch in place can become loose or damaged. This could potentially allow water to seep through gaps, leading to leaks, or could cause the float switch to malfunction, affecting the dishwasher's ability to regulate water levels accurately.

Symptoms of a faulty Nut include:

• Water leaks from the base of the dishwasher 
• The dishwasher overfills or underfills 
• Unusual noises during operation 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.

The Water Level Float is an OEM part for Whirlpool dishwashers. It helps regulate the water level within the dishwasher by rising with the water level and signaling the control board to shut off the water inlet valve when the appropriate level is reached.

Causes of a bad water level float can include wear and tear, mineral buildup or debris obstructing its movement, or damage due to mishandling. Over time, these issues can prevent the float from moving freely or accurately signaling the water level.

Symptoms of a bad water level float include:

• Dishwasher overfilling or underfilling
• Water leaks during the wash cycle
• The dishwasher not completing cycles correctly
• Error codes related to water level issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

• Water leaks around the hose connection points
• The hose slipping off the fitting
• Visible rust or wear on the clamp
• Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Dishwasher drain hose channels wastewater from the pump to your home plumbing. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.

This tube-vent routes dryer air from the blower housing to the exhaust port, helping maintain proper airflow for efficient drying and safe venting. It's a direct-replacement component used where the original vent tube is damaged or disconnected. What it does:

• Channels hot, moist air from the dryer's blower to the external vent
• Helps prevent air leaks that can reduce drying performance
• Reduces lint bypass around the blower housing when properly installed
• Can address symptoms like reduced drying efficiency or poor airflow at the outside vent

• One tube-vent

• Disconnect power (and gas supply for gas dryers) before beginning any service
• Inspect and clean surrounding lint and venting before installing the new tube
• Ensure all clamps and seals are tight to prevent air leaks; replace damaged clamps or gaskets as needed

This replacement refrigerator door gasket creates a tight seal around the fresh-food compartment door to help keep cold air in and warm, humid air out, improving cooling performance and reducing frost buildup. What it does

• Forms an airtight seal around the fresh-food door to help maintain interior temperature
• Helps prevent warm air and moisture from entering, reducing frost and condensation
• Can reduce compressor runtime caused by a leaking door seal
• Common symptom: visible gaps, tears, or warped edges around the door; uneven cooling or frost along the door perimeter

• One refrigerator door gasket

• Inspect and clean the door flange before installing to ensure a proper seal
• Start installation at the corners and work around the perimeter, pressing the gasket into the channel to seat it evenly
• Warm the gasket slightly if needed to make it more flexible for fit; avoid overheating
• Disconnect power only if required by your refrigerator model and follow all safety precautions

If steam isn't releasing properly or moisture remains after cycles, the dishwasher vent may be clogged or damaged. Restores proper ventilation.

Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.