Parts for Ge PSIC3RGXCFBV: 01 - Freezer Door Parts

Soft touch insert for refrigerator door handle. Replaces worn, cracked, or missing grip inserts. Restores comfortable grip and finished appearance.

Fix a cracked or discolored dispenser trim on your refrigerator. This recess trim covers the touchpad area for a clean finished look. Easy DIY fix.

Fix a damaged or missing dispenser trim on your refrigerator. This trim recess covers the touchpad area for a clean finished look. Simple install.

Replaces a cracked or broken door stop on your refrigerator. This plastic cam riser installs on the cabinet to control door closure and positioning.

Replaces broken or cracked refrigerator door stop. Installs on door to limit swing range and prevent cabinet damage. Needed when missing or worn.

Seals freezer door to prevent frost buildup and air leaks. Replace if torn, warped, or causing moisture issues. Verify fit with your model number.

Seals freezer door to prevent warm air entry and cold air loss. Replace if torn, cracked, or causing frost buildup. Confirm fit with your model number.

White plastic cam closure that aligns and secures the freezer door in the hinge area. Replace if cracked, broken, or worn to restore proper alignment.

Replaces a broken or worn freezer door cam closure on side-by-side refrigerators. Installs on the door to control opening range and secure latching.

Guides ice from the ice maker to the dispenser or storage bin. Replace if cracked, broken, or missing to prevent ice jams and ensure proper alignment.

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This is a refrigerator ice and water dispenser drip tray located on the freezer door. Color: White. It measures about 8 inches wide by 4 inches deep. For black order WR17X11655.

Replacement drip tray for refrigerator water and ice dispensers. Catches drips and spills at the dispenser. Replace if cracked, broken, or stained.

Ice won't dispense or dispenser flap sticks open? The ice dispenser solenoid controls ice flow. DIY-friendly repair with our install video.

The recess door retainer secures the dispenser's ice chute flapper in the refrigerator door. Replacing a cracked or missing retainer restores proper flapper pivot and sealing to help reduce frost buildup and air leaks around the dispenser.

• Holds the recess/ice door on its pivot within the dispenser assembly
• Helps the flapper close fully to seal the ice chute
• Restores smooth open/close action of the dispenser door
• Common symptoms: loose or fallen flapper, poor chute seal, frost or condensation in the dispenser area, and ice clumping near the chute

• Unplug the refrigerator before servicing the dispenser
• Carefully remove the dispenser bezel/control panel to access the ice chute door assembly
• Note spring orientation and retainer position; transfer components to the new retainer
• Verify flapper movement and seal before reassembly and restoring power

If your dispenser light stays off or won't turn on, this control board restores proper illumination. Moderate DIY, requires clip release and wiring.

White

This kit includes a dispenser housing shield and funnel guide that direct ice from the ice maker through the dispenser chute and into your glass. The shield helps prevent ice from jamming or scattering inside the dispenser housing. Replace this kit if ice is getting stuck in the chute, dispensing erratically, or if the plastic shield or funnel is cracked or broken.

Ice dispenser door assembly seals the ice chute opening on your refrigerator. Replace if cracked, warped, or the rubber gasket is damaged and leaking air.

Spring that provides closing tension for the refrigerator water/ice dispenser door flap. Keeps the dispenser sealed when not in use. Replace if door hangs open or won't close.

Replacement dispenser door recess crank for refrigerators. Operates the ice/water dispenser door mechanism. Replace if broken, worn, or corroded.

Bisque

White

This kit includes a dispenser housing shield and funnel guide that direct ice from the ice maker through the dispenser chute and into your glass. The shield helps prevent ice from jamming or scattering inside the dispenser housing. Replace this kit if ice is getting stuck in the chute, dispensing erratically, or if the plastic shield or funnel is cracked or broken.

Water or ice dispenser not working? This dispenser switch activates when you press the lever. Easy DIY repair—takes about 30 minutes with basic tools.

The Torsion Spring is an OEM part for GE refrigerators. It is essential for maintaining the proper tension and operation of the refrigerator door. This spring ensures the door closes smoothly and stays securely shut, preventing cold air from escaping and maintaining the appliance’s efficiency.

Causes of a bad torsion spring can include metal fatigue from regular use, corrosion from exposure to moisture, or damage due to excessive force or mishandling. Over time, these factors can weaken the spring, affecting the door’s performance.

Symptoms of a bad Torsion Spring include:

• Door not staying closed
• Difficulty in opening or closing the door
• Door feels loose or unbalanced
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Connects water supply tubing sections in your refrigerator. Replace this plastic compression union if it's cracked, leaking, or broken. Installs inline.

Color: Black

Freezer module support bracket for refrigerators. Installs inside the freezer to hold shelving or storage components. Replace if cracked or broken.

This fixed freezer module shelf supports and secures the freezer module assembly, restoring stable storage and preventing items from shifting or contacting the module. It's a direct replacement for a cracked, warped, or missing shelf. What it does:

• Holds and supports the freezer module assembly so it stays properly positioned.
• Keeps stored items from contacting or damaging the module.
• Replaces shelves that are cracked, broken, or bent and that allow items to slide or fall.
• Reduces rattling or movement caused by a loose or broken shelf.

• Disconnect power to the refrigerator before servicing to prevent electrical hazard.
• Empty the freezer area and remove loose shelves or bins that block access.
• Align the shelf with its mounting points and seat it gently; do not force or modify the part.
• If fasteners are present, reuse OEM fasteners or replace with manufacturer-specified hardware.

Replace your refrigerator's damaged or missing wire tilt-out basket. This door-mounted storage bin restores organization and accessibility for smaller items.

Bottom freezer door plug insert for side-by-side refrigerators. Replaces cracked, broken, or missing inserts to restore door appearance and seal.

Plastic bushing that fits inside the lower freezer door hinge assembly. Replace when cracked, worn, or broken to restore smooth door operation.

Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.

Replacement mounting screw for refrigerator panels, brackets, and hardware. Secures loose components and reduces rattling from missing or stripped screws.

Door hinge thimble for side-by-side refrigerators. Installs on the door hinge assembly. Replace if cracked, broken, worn, or missing for proper alignment.

Door hinge thimble for side-by-side refrigerators. Installs on the door hinge assembly. Replace if cracked, broken, or worn to restore proper alignment.

Bushing that lines the upper hinge pin on refrigerator doors. Replace if cracked, worn, or missing to restore smooth door swing and proper alignment.

White freezer door handle trim assembly for refrigerators. Replaces cracked, broken, or discolored trim pieces. Installs on freezer door handle.

Freezer door side trim for refrigerators. Installs along the edge of the freezer door. Replace if cracked, broken, or missing to restore appearance.

A replacement door side trim that restores the freezer door's finished appearance and helps seal the door edge. Durable trim covers the exposed edge for a cleaner look and helps maintain an even door fit. What it does:

• Covers and protects the exposed freezer door edge from chips, dents, and wear
• Helps maintain a tighter door fit to reduce drafts and improve closure
• Restores the refrigerator's original finished appearance after damage
• Useful when trim is cracked, bent, or missing from the freezer door edge

• Remove power or keep door propped open per manufacturer safety guidance before replacing parts
• Trim typically snaps or screws into place; inspect fasteners and retainer clips for damage
• If clips or screws are damaged or missing, replace them before installing the new trim

This top door trim piece replaces a damaged or faded freezer door trim to restore the door's appearance and proper edge finish. It provides a clean, factory look and helps protect the door edge from chips and wear. What it does:

• Replaces cracked, dented or missing top trim that leaves the door edge exposed
• Restores a flush, finished appearance along the top of the freezer door
• Helps keep the door gasket aligned at the top edge for a cleaner seal
• Prevents debris and moisture from collecting in the exposed door edge

• Disconnect power to the appliance before starting work to avoid injury
• Remove any retainers or screws securing the trim; some models use snap-in clips—support the door while working
• Align the replacement trim carefully and secure with the original fasteners; do not overtighten

Decorative trim piece that covers the top edge of your refrigerator freezer door. Replace if cracked, broken, discolored, or missing to restore appearance.