Parts for Electrolux ERMC2295AS: Freezer & Middle Drawer Parts

This flexible refrigerator door gasket seals the cabinet to help keep cold air in and reduce energy loss. It replaces a worn or torn seal to improve cooling performance and reduce frost and condensation. What it does:

• Creates an airtight seal around the refrigerator door to help maintain internal temperature
• Helps prevent warm air leaks that can cause excess frost, moisture, or cycling
• Reduces energy use by improving cabinet insulation
• Restores proper door closing and alignment when the old gasket is warped or cracked

• Disconnect power to the appliance before beginning any repair
• Clean and dry the gasket mounting surface to ensure a proper seal
• Seat the gasket evenly into the door channel; use gentle heat (hair dryer) only as manufacturer recommends to soften and shape
• Inspect door alignment and latch after installation; replace if hinge or closure issues persist

A replacement door gasket that restores a refrigerator door seal to help maintain proper cooling and energy efficiency. Designed to fit the original door opening and create a consistent airtight seal. What it does:

• Seals the refrigerator door to help keep cold air in and warm air out
• Helps reduce frost build-up and prevents food spoilage caused by poor sealing
• Common symptom fix: warm or fluctuating refrigerator temperatures around the door area
• Common symptom fix: visible gaps, cracks, or tears in the existing door seal

• One replacement door gasket

• High-level swap: remove the old gasket, clean the gasket channel, and press the new gasket into place following the door's retaining flange
• Warmth or a hair dryer on low can help soften and seat the gasket during installation (use caution to avoid overheating)
• Check door alignment and hinge adjustments if the gasket does not seat evenly after installation
• Disconnect power and follow manufacturer safety instructions before working on the appliance

This replacement door gasket creates a tight seal around the refrigerator door to help maintain proper temperature and keep food fresher. It restores the cabinet seal to reduce frost, leaks, and energy loss from a failing seal. What it does:

• Seals the refrigerator door to keep cold air in and warm, humid air out
• Helps prevent frost buildup and water pooling inside or under the unit
• Reduces temperature fluctuations that can cause spoiled or frozen food
• Can improve cooling efficiency and reduce excessive compressor cycling

• Remove food and shelves as needed for clear access; handle gasket carefully to avoid twisting
• Clean the door flange and mating surface before installing to ensure a proper seal
• Inspect hinge alignment and strike plate; minor adjustments may be needed for an even seal

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer

This interior refrigerator lamp replaces a burned or dim light to restore usable illumination inside the appliance, making it easier to find items and temperatures at a glance. Simple swap restores safe, visible interior lighting. What it does:

• Replaces a failed or flickering refrigerator interior lamp so the compartment is properly lit
• Helps you see food clearly to prevent spoilage and make loading/unloading easier
• Restores normal operation when the lamp no longer lights or is visibly damaged
• Works with compatible Frigidaire refrigerator light housings and sockets

• One interior refrigerator lamp

• Disconnect power before servicing to avoid electrical shock
• Handle the lamp carefully; avoid touching glass with bare hands if it's a halogen-style bulb
• Seat the lamp securely in the socket and restore power to test operation
• If the lamp still doesn't work after replacement, check the socket and door switch for issues

The PC Board is an OEM part for Frigidaire refrigerators. It serves as the control center of your refrigerator, allowing you to adjust settings, monitor temperatures, and access various functions.

A bad PC board can be caused by electrical issues, component failure, or damage. When the user interface and display board become faulty, it can result in issues such as unresponsive controls, inaccurate temperature readings, or a blank display.

Symptoms of a bad PC include:

• Unresponsive buttons or controls on the refrigerator
• Inaccurate temperature readings or inconsistent display
• Blank or flickering display

Replace your faulty PC board with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This replacement screw secures appliance panels, brackets, and components for a solid, rattle-free fit. Replace stripped, rusted, or missing hardware to restore proper alignment and dependable fastening where this fastener is specified.

• Fastens panels, brackets, trim, or internal parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling noises
• Direct replacement for stripped, rusted, or missing hardware
• Symptoms include loose panels, gaps, or screws that won't tighten

• Disconnect power (and gas/water if applicable) before servicing
• Use the correct driver/bit; hand-start threads to avoid cross-threading
• Replace screws one at a time to maintain alignment
• Snug firmly—do not overtighten into plastic or thin metal

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This is a replacement mounting screw used to secure appliance panels and small components so parts stay firmly in place during normal use. Installing the correct screw restores proper fit and reduces rattles or loose trim. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps components aligned to prevent vibration and noise
• Replaces a lost or stripped screw to restore secure attachment
• Helps maintain safe, stable operation by holding parts where they belong

• One replacement mounting screw

• Disconnect power and water before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can damage threads or panels
• Keep removed fasteners organized so you reinstall them in the original locations

This replacement refrigerator storage drawer restores lost or damaged bin space so food stays organized and contained. It fits into the refrigerator's lower storage area and offers a clean, visible place for produce and packaged items. What it does

• Replaces a cracked, broken, or missing storage drawer so items can be stored securely.
• Holds produce and packaged foods while keeping the cabinet organized and tidy.
• Slides into the cabinet on existing tracks or rails to allow easy access.
• Helps contain spills and makes cleaning faster by removing and rinsing the drawer.

• Unplug the appliance or disconnect power before beginning any work.
• Remove all contents and any damaged drawer remnants before installing the new drawer.
• Slide the drawer into the existing rails or guides; do not force — it should align and move smoothly.
• If the drawer does not seat properly, inspect rails, rollers, and guides for damage or debris and replace those parts as needed.

The Refrigerator Freezer Drawer Assembly is an OEM replacement part for Frigidaire bottom-mount refrigerators. It provides a pull-out storage solution accessible from the bottom of the refrigerator. The drawer assembly contains the necessary components to function as a freezer compartment.

Symptoms of a bad drawer assembly include: 

• Difficulty opening or closing the drawer  
• Improper freezing or frost buildup inside
• Temperature fluctuations within the drawer
• Water or air leaks causing freezer burn on contents

Causes may be related to wear and tear over time, particularly on moving parts. Damage from overloading or other mishandling could also impair operation. 

This replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore side-by-side refrigerator models.