Parts for Electrolux ERMC2295AS: Ice & Water Dispenser Parts

This guide helps a refrigerator drawer or bin slide smoothly and stay aligned, restoring stable movement and preventing binding. It's a simple replacement that improves drawer tracking and reduces noise from misalignment. What it does

• Guides the drawer/bin along its track to maintain proper alignment.
• Reduces rubbing, catching, and uneven movement when opening or closing.
• Helps prevent drawer jams and uneven wear on adjacent components.
• Works as the replacement guide component for the original factory slide assembly.

• Remove power to the appliance and empty the drawer before beginning work.
• Usually installs with simple clips or screws; keep fasteners from the old part for reuse if intact.
• Inspect mating tracks and rollers for damage or debris and clean before installing the new guide.

This dispenser assembly replaces the front dispenser housing and controls the ice and water delivery on compatible refrigerators. Restores proper dispensing function and helps stop leaks or misalignment that prevent cups from filling correctly. What it does:

• Houses the dispenser chute, actuator area, and user controls for ice and water dispensing
• Directs water and ice into the cup and helps prevent drips and leaks at the dispenser opening
• Replaces cracked, warped, or broken dispenser housing that can block or misalign flow
• Restores stiff or non-engaging dispenser actuators when the housing is damaged

• Disconnect power and shut off the water supply before beginning work
• Handle panels and components carefully to avoid scratching or damaging the finish
• Test dispenser operation and check for leaks after installation

This cover is a replacement outer panel that protects internal components and restores the appliance's finished appearance. It helps keep wiring and mechanisms enclosed while giving the cabinet a clean, secure fit. What it does:

• Protects internal components from dust, debris and accidental contact
• Restores proper fit and finish when original cover is cracked, warped or missing
• Helps prevent rattles or gaps that can indicate a loose or broken panel
• Re-establishes mounting points and alignment for adjacent trim or controls

• Disconnect power to the appliance before beginning any repair
• Handle edges carefully; use gloves to avoid cuts from sharp sheet-metal or tabs
• Inspect mounting clips and screws; replace any damaged hardware for a secure fit

This control panel is the user interface assembly that lets you select and change oven or appliance functions, restoring visible controls and responsive button operation for normal use. It provides a straightforward replacement for worn or faulty front controls. What it does:

• Houses the push buttons/touch controls and display used to set temperatures, modes, and timers.
• Restores responsiveness when buttons or touch controls stop working or act intermittently.
• Replaces a control surface with faded or unreadable markings, improving visibility and usability.
• Re-establishes proper signaling between the user interface and the appliance control electronics.

• Control panel assembly (1)

• Disconnect power to the appliance before starting any repair to avoid shock.
• Remove outer trim or top panel as needed to access and replace the panel; keep screws and fasteners organized.
• Handle the assembly carefully to avoid damaging plastics, clips, or the display; do not touch circuit contacts.

This replacement electrical switch controls power to a specific function in your appliance. By opening or closing the circuit, it lets the selected feature turn on and off reliably when you actuate the control.

• Completes or breaks the circuit to start/stop its assigned component
• Restores responsive on/off or selector operation at the control
• Common failure symptoms: feature won't start or won't shut off, intermittent operation, loose/stuck actuator, or heat discoloration on the old switch
• Used in control, console, or door areas depending on model design

• Disconnect appliance from power before servicing
• Access the switch location per your model; remove knob/panel if applicable
• Photograph wire positions and note terminal labels (COM/NO/NC) if present; transfer wires one at a time to the new switch
• Secure mounting, ensure tight connectors, reassemble, restore power, and test operation

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This tension spring provides the restoring force needed for a moving refrigerator component, helping parts return to their normal position for reliable operation and alignment. It's a simple replacement that restores proper movement and stability. What it does:

• Provides tension to return or hold a component in place during normal operation
• Helps maintain proper alignment and smooth movement of the associated mechanism
• Worn or broken springs can cause improper latching, sagging, or uneven movement
• Replacing a damaged spring often resolves related noise or binding issues

• One replacement spring

• Disconnect power before attempting any repairs to avoid electrical hazards
• Handle springs carefully; they can be under tension and may require basic tools to remove/install
• Replace with the exact part number to ensure fit and function

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling