Parts for Electrolux ERMC2295AS: Shelves Parts

Water dispenser not working or leaking underneath? This reservoir tank stores and supplies water to your refrigerator's dispenser and ice maker system.

This drum support roller keeps the dryer drum turning smoothly by supporting and guiding the drum on its shaft. Replacing a worn roller restores quieter, more reliable drum rotation and helps prevent drum wobble. What it does:

• Supports the dryer drum and reduces friction during rotation
• Helps eliminate squeaking, thumping or rumbling noises from the rear of the drum
• Prevents excessive drum wobble that can lead to uneven wear
• Works with the dryer's shaft and bearing system to maintain proper drum alignment

• Disconnect power before beginning any repair to avoid electric shock
• Inspect the mating shaft, bearing and other rollers for wear; replace as needed
• Remove the dryer drum to access and replace the roller per your model's service instructions
• Use correct tools and follow factory torque/fit guidance; do not lubricate sealed bearings

Replace a cracked, broken, or missing refrigerator storage drawer. This molded plastic bin slides into factory rails to organize and contain food items.

Replacement cover assembly for bottom-mount refrigerators. Installs to conceal internal components and protect mechanisms. Order new assembly if original is cracked, broken, or missing.

This is a replacement mounting/support bracket that secures internal components and helps keep panels and assemblies aligned for reliable operation. Use it to restore proper fit and reduce vibration or movement in the affected area. What it does:

• Provides a secure mounting point for an appliance panel or internal assembly
• Keeps parts aligned to prevent rubbing, gaps, or mis-seating
• Reduces vibration and rattling caused by a loose or damaged bracket
• Helps restore proper door or panel fit when original bracket is bent, cracked, or worn

• Install with power disconnected and appliance in a stable position
• Check surrounding fasteners and mating surfaces for wear; replace if damaged
• Use the same screw locations and hardware unless the OEM specifies replacements

Tempered glass shelf that installs inside your refrigerator to provide storage space. Replace if yours is cracked, chipped, broken, or missing.

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This mounting bracket secures appliance components and helps keep panels, assemblies, or wiring in place for stable operation. Fits specific Frigidaire appliance locations where a compact support or fastener is required. What it does

• Provides a secure mounting point for panels, assemblies, or wiring to reduce movement
• Restores proper alignment of parts that may shift or sag over time
• Helps eliminate rattling or vibration caused by loose components
• Works as a direct replacement for the original bracket in the same location

• Bracket

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain existing fasteners unless replacements are required
• Handle edges carefully to avoid cuts; wear gloves if needed

Replacement mounting screw for refrigerators. Secures panels, brackets, and trim components. Replace if missing, stripped, or damaged to restore fit.

Fix warm fridge temps and frost buildup with a new door gasket. Restores the seal to keep cold air in and reduce energy waste on your refrigerator.

Replacement storage drawer bin for bottom-mount refrigerators. Restores usable space when original is cracked, broken, or missing. Durable plastic.

Separates sections inside refrigerator shelves or drawers to organize food. Replace if cracked, broken, or missing to restore compartment layout.

Replacement drawer slide guide for refrigerators. Installs on the drawer track to ensure smooth, aligned movement. Needed when cracked, broken, or worn.

Fix water leaks or low ice production with a new refrigerator water manifold. Routes water from inlet to dispenser and ice maker. Moderate DIY repair.

Reduces contaminants and removes chlorine taste and odor from your refrigerator's water and ice. Replace every 6 months for optimal performance.

Wire connector for bottom-mount and side-by-side refrigerators. Replaces damaged, cracked, or corroded electrical connectors in wiring harnesses.

No water or ice from your refrigerator? This inlet valve controls water flow to the dispenser and ice maker. Direct replacement for bottom-mount models.

Replacement water supply tubing for refrigerators. Installs between water valve and ice maker or dispenser. Replace if original line is brittle, kinked, or leaking.

Water dispenser tube for bottom-mount refrigerators. Connects water supply to dispenser mechanism. Replace if cracked, leaking, or kinked.

Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.