Parts for Electrolux ERMC2295AS: Fresh Food Doors Parts

This electronic control board regulates the refrigerator's main functions, allowing the appliance to manage temperature cycles, defrost timing, and user interface signals for reliable daily operation. What it does:

• Controls compressor, fan, and defrost cycles to maintain set temperatures
• Manages front-panel display and user input signals
• Coordinates automatic defrost timing and related components
• May cause display errors, incorrect temperatures, or intermittent cooling when failing

• One electronic control board

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an ESD strap if available
• Verify connector orientation and secure all harnesses before restoring power
• After installation, test functions and temperature response; monitor for any error codes

Replacement door magnet that helps the refrigerator or freezer door stay closed for a tighter seal and more consistent cooling. Restores magnetic hold so doors close reliably and reduce warm spots. What it does

• Provides magnetic hold for the door liner so the door stays shut during normal use
• Helps maintain the gasket engagement to preserve internal temperature
• Common symptom: door not staying closed, food warming, or frost build-up near the door
• Used in door/gasket assembly where magnets secure the seal

• Turn off power to the appliance or unplug before removing door trim or accessing internal components
• Remove door liner or gasket per service instructions to access and replace the magnet; keep fasteners and seals intact
• Press or seat magnet into its channel or mounting location; use the OEM fastener or adhesive method specified by the manufacturer

This interior refrigerator lamp replaces a burned or dim light to restore usable illumination inside the appliance, making it easier to find items and temperatures at a glance. Simple swap restores safe, visible interior lighting. What it does:

• Replaces a failed or flickering refrigerator interior lamp so the compartment is properly lit
• Helps you see food clearly to prevent spoilage and make loading/unloading easier
• Restores normal operation when the lamp no longer lights or is visibly damaged
• Works with compatible Frigidaire refrigerator light housings and sockets

• One interior refrigerator lamp

• Disconnect power before servicing to avoid electrical shock
• Handle the lamp carefully; avoid touching glass with bare hands if it's a halogen-style bulb
• Seat the lamp securely in the socket and restore power to test operation
• If the lamp still doesn't work after replacement, check the socket and door switch for issues

This replacement screw secures appliance components in place. Use it to replace a missing, stripped, or rusted fastener so shelves, handles, panels, or brackets stay properly mounted and the unit operates without unwanted movement.

• Fastens components to the cabinet, door, liner, or frame
• Restores a solid fit when the original screw is worn or lost
• Helps eliminate looseness, rattling, or misalignment
• Matches the original hardware for correct fit and thread engagement

• Disconnect power before servicing; for refrigerators, also turn off the water supply
• Align parts and start the screw by hand to avoid cross-threading
• Tighten with the correct driver; do not overtighten, especially into plastic
• If receiving threads are damaged, repair or replace the mating clip/bracket before installing

This crisper drawer is the vegetable storage bin that helps organize fresh produce and free up shelf space in the refrigerator. It provides a clear, easy-to-clean compartment that keeps foods contained and visible. What it does:

• Replaces a damaged or cracked crisper/vegetable drawer to restore usable fridge storage
• Keeps fruits and vegetables separated from main shelves to reduce spills and mess
• Maintains clear visibility so you can quickly find stored items
• Fits into the refrigerator's lower storage area and slides on existing tracks or supports

• Remove power to the appliance or open the fridge door wide and work carefully to avoid pinching fingers
• Slide old drawer out fully and lift to disengage; set new drawer onto existing tracks and slide into place
• No special tools typically required; inspect tracks and guides for damage before installing
• If the drawer does not seat or slide smoothly, check for obstructions or broken supports and replace as needed

This clear refrigerator bin replaces a cracked, worn or missing interior storage drawer to restore usable shelf space and help keep food organized. A simple, visible container that holds produce, deli items or packaged foods. What it does

• Provides a removable storage area to keep items contained and organized inside the fridge
• Collects minor spills and prevents loose items from rolling onto lower shelves
• Restores proper fit and sealing where damaged or broken interior bins cause uneven stacking
• Helps maintain refrigerator usability when original drawer is cracked, chipped or missing

• Designed for a slide-in installation; align tracks or guides and slide until it seats firmly
• No special tools required for most units; your refrigerator's manual for specific guidance
• Disconnect power only if removing electrical components nearby; this is a non-electrical part
• Inspect mounting guides for damage and replace if worn to ensure proper fit

This replacement crisper/produce drawer stores fruits and vegetables in the refrigerator so they stay organized and contained. It restores missing, cracked, or damaged drawers so you can use the refrigerator storage as intended. What it does:

• Holds fresh produce and other refrigerated items on the lower shelf area
• Slides in and out to provide easy access to stored food
• Replaces a cracked, warped, or missing crisper drawer that lets items fall through or out of the fridge
• Helps keep contents contained to prevent spills and improve organization

• One replacement crisper/produce drawer

• Removes and installs by sliding into the lower drawer tracks; no tools typically required
• Inspect drawer tracks and mounts for damage; clean tracks before installing for smooth operation
• Handle replacement carefully to avoid cracking the plastic; do not overtighten any fasteners
• If sharp edges or broken fragments are present, wear gloves and follow proper disposal procedures

This replacement mounting screw secures panels and components on compatible Frigidaire appliances, restoring proper fit and stability. It's a direct-fit fastener used where factory screws have been lost, stripped, or corroded. What it does

• Fastens panels, brackets, or components to the appliance chassis
• Restores secure attachment when original screw is missing or damaged
• Helps eliminate rattling or loose parts caused by worn or missing fasteners
• Compatible where the OEM screw specification is required for proper fit

• Disconnect power before accessing appliance panels or internal components
• Use the correct driver bit and avoid over-tightening to prevent striping or thread damage
• Replace with the exact OEM screw type for safety and proper fit

The Handle Screw is an OEM part for Frigidaire refrigerators. It is a fastener or screw used to securely attach the refrigerator door handle. Properly installed handles allow for easy opening and closing of refrigerator doors with minimal effort. 

Causes of a bad Handle Screw include damage or wear over time and corrosion that causes the screw to seize or strip. 

Symptoms of a bad Handle Screw are:

• Loose or wobbly door handles
• Difficulty opening the refrigerator door  
• Handles detaching from the door
• Doors that will not stay closed securely

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Right Door Closer is an OEM part for Frigidaire refrigerators. It is responsible for ensuring that the refrigerator door closes securely and maintains a proper seal, keeping the cold air inside and your food fresh.

A bad right door closer can be caused by wear and tear, damage, or misalignment. When the closer becomes faulty, it can result in issues such as a loose or sagging door, difficulty in closing the door properly, or a compromised seal that leads to temperature fluctuations.

Symptoms of a bad right door closer include:

• Door not closing or sealing properly
• Condensation or frost buildup inside the refrigerator
• Noisy or squeaking door operation

Replace your faulty right door closer with this genuine OEM part to restore your refrigerator door. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This left-hand door closer replaces the refrigerator/freezer door closer that helps the door swing closed smoothly and stay aligned for a proper seal. Restores reliable closing and reduces door sag or misalignment. What it does:

• Guides and supports the left-side door as it closes to prevent slamming and ensure proper latch engagement
• Helps maintain an even seal to preserve internal temperature and reduce energy loss
• Reduces door sag, rubbing, or uneven gaps caused by worn or broken closers
• Works with the existing hinge/door hardware to control door motion

• High-level replacement — remove the door trim/inner panel to access the closer if required
• Keep screws and brackets organized; verify orientation for left-hand side before fastening
• Disconnect power to the appliance or follow manufacturer's safety guidance when working near electrical components

This refrigerator clip is a small retainer that secures a component in place so it stays properly seated during use. Replacing a worn or missing clip restores a snug fit and helps eliminate looseness, rattling, or misalignment.

• Holds a part, panel, tube, or wire securely in its mounting point
• Maintains alignment to prevent shifting or vibration
• Helps preserve proper fit and airflow when components are correctly seated
• Symptoms can include loose or sagging pieces, rattling noises, or parts that won't stay attached

• Unplug the refrigerator; if working near water lines, shut off the water supply
• Note the clip's orientation before removal; take a photo for reference
• Use needle-nose pliers to release/install; avoid over-flexing the clip
• After installation, tug-test gently to confirm a secure fit before reassembling

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head