Martha H Bremen , OH March 03, 2017 Appliance: Model WHIRLPOOL ELITE STANDUP FREEZER Wi could barley read the control panel alarms with my temperature & door alarm keep going off i tried to reset my door alarm but it just kept beeping! i tried turning the power on and off Easiest fix in the world! Took a painters putty knife and pried off the panel. Panel popped off and iI just replaced it. Make sure you turn the power off first before you start your repair. Read More... 10 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes Tools: Screwdrivers
Adam B Louisville , KY January 20, 2019 Appliance: Model 253.28712800 Control board My Kenmore elite upright freezer model started buzz beeping and interior light blinking, but only when I opened the door while the compressor was running. It would not stop until I closed the door, and then the freezer would return to normal. It never had any error codes and didn't do it if the compressor was off.This happened for several weeks until I opened the door one day while the compressor was running and the freezer shut off and random lights on the control panel were on. I unplugged the freezer and pulled the control panel off with a 2" putty knife and visually inspected it but I found nothing unusual. So I put it back on and plugged the freezer back in and different lights were lit up on the control panel than before but the freezer interior light was still off and the compressor never started back up. Then I knew the control panel was the issue. Read More... 9 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Mechelle J Kingwood , TX August 04, 2017 Appliance: Model 297366203 Freezer kept turning off. I replaced the electronic control panel. Read More... 4 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Darin A Sacramento , CA November 25, 2016 Appliance: Kenmore Freezer 25328092800 Lcd display on kenmore upright freezer malfunction (2008) Unplugged display by pulling up on edges with putty knife, thin screw driver, or finger nails. Plugged in new display. Very easy fix! Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes
Dennis M Apalachin , NY November 27, 2018 Yes I ordered the front control panel and it fixed the issue right away. Shipping was fast and very quick. Thanks Read More... 1 People found this story helpful Do-It-Yourself Rating: Repair Time Estimate: Less than 15 minutes