Frigidaire Range / Cooktop / Oven Wire, Harness, Power Cord

This wiring harness connects electrical components to restore proper power and signal routing in your appliance. Replaces a worn or damaged harness to help resolve intermittent power, non-functioning controls, or connector-related failures. What it does:

• Carries power and signals between control boards, motors, switches, and sensors
• Replaces frayed, broken, or heat-damaged wiring that can cause intermittent operation
• Restores secure connections where connectors are cracked or pins are loose
• Helps eliminate faults caused by shorted or open circuits in the original wiring

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Compare the new harness to the old part to ensure connector types and routing before installing.
• Route wires along the original paths and secure with existing clips or ties to prevent heat or abrasion damage.

This 4-foot, 40-amp, 3-wire power cord replaces a worn or damaged range/oven cord to restore safe, consistent power to the appliance. Bagged for protection, it provides the correct length and amperage for compatible electric ranges. What it does:

• Carries 240V/120V power to the appliance through three conductors (two hot, one neutral/ground)
• Restores power when a frayed, cut, or burnt cord is the cause of appliance power loss
• Helps eliminate intermittent power or arcing caused by loose or damaged cord connections
• Suitable when the original 3-prong cord needs replacement with a like-for-like amperage and length

• One bagged 4' 40 amp 3-wire power cord

• Disconnect house power at the breaker before removing the old cord or accessing terminal block
• Match replacement cord terminals and mounting orientation to the existing cord; secure with the factory strain relief
• Inspect terminal block and wiring for damage before connecting the new cord; replace any damaged parts first

This main wiring harness connects a refrigerator's control board and key components, providing organized power and signal routing so controls, lights and the compressor operate reliably. Replaces a damaged or burned main harness for restored electrical continuity. What it does

• Routes power and signal connections between the control board, lights, compressor and sensors.
• Prevents intermittent operation caused by loose, corroded or broken wiring.
• Can stop failures such as no lights, components not running, or control errors when the harness is the fault.
• Keeps wires organized and secured to avoid chafing and shorting.

• One main wiring harness as pictured.

• Disconnect power before servicing to prevent shock or damage.
• Compare the new harness to the original and route wires the same way; replace any damaged clips or grommets.
• Reconnect all terminals fully; loose connectors can cause intermittent faults.

The Wiring Harness is an OEM component specially designed for Frigidaire gas ranges. Comprising bundled electrical wires, it powers critical control functions linking internal systems.

Continuous vibration from burners and motors fatigues insulation over time risking circuit failures or shorts that limit operations. Performance reliability decreases.

Causes involve normal thermal cycling from gas heating repeatedly flexing harness sheathing. Impacts risk abrading or severing vulnerable conductors.

Symptoms of a bad wiring harness include: 

• Unresponsive control panels or display errors
• Individual cooking features ceasing to operate
• Range failing to power on as expected

Replacing with this OEM Frigidaire harness restores integrated range functionality. Compatibility also fits some Kenmore, Gibson, and Electrolux appliances preserving safe, optimized performance for years through authorized maintenance. 

This 4-foot, 4-wire, 50-amp range cord provides a secure connection from a 4-prong receptacle to your electric range, restoring reliable power when the original cord is damaged, overheated, or worn.

• Connects the range to a compatible 4-prong outlet using two hot, one neutral, and one ground conductor
• Replaces cords with frayed insulation, scorched or loose plug blades, or damaged terminals
• Helps address intermittent power loss or breaker trips linked to a failing cord
• Supports installations that require a 50-amp, 4-wire connection

• Turn off power at the service panel before starting any work
• Route through a proper strain relief and tighten per your model's instructions; connect L1, L2, Neutral, and Ground securely with no exposed copper
• If your model uses a neutral-to-chassis bonding strap, follow the wiring diagram for a 4-wire setup.

This harness assembly is the appliance wiring connector bundle that carries power and signals between controls and components, restoring proper electrical connections for normal operation. What it does:

• Routes power and control signals between the control board and key components
• Replaces damaged, burned, or loose wiring that can cause intermittent operation
• Helps resolve symptoms like unresponsive controls, failure to start, or component loss of power
• Restores factory wiring layout and connector fit for reliable connections

• Disconnect power before starting; confirm power is off at the breaker
• Compare connectors and wire colors to the old harness before removal
• Route and secure harness to avoid heat or pinch points; use existing clips/mounts

This multi-connector wire harness restores electrical connections between appliance components so controls and features receive power and signals. Replacing a damaged harness helps stop intermittent operation and restore reliable function. What it does:

• Routes power and signal connections between control boards, switches, and components
• Replaces cracked, burned, or frayed wiring that can cause intermittent or no operation
• Fixes symptoms such as controls not responding, lights or displays failing, or specific functions not working
• Provides factory-style connectors for a direct plug-in replacement

• Disconnect power (unplug or shut off breaker) before starting any repair
• Match connector shapes and pin counts; do not force connectors together
• Secure harness away from hot or moving parts and use existing clips or fasteners