Frigidaire Wall Oven Touch Pad

This is a control panel overlay for the electronic oven control on select ranges and wall ovens. It restores clear, readable button labels and refreshes the panel appearance while shielding the control face from everyday wear.

• Provides printed legends/icons for clock, timer, and oven functions
• Adheres to the EOC face to protect it from splashes and cleaning abrasion
• Use when the original overlay is faded, peeling, bubbled, cracked, or illegible
• Model-specific layout ensures the correct key positions and markings

• Disconnect power to the appliance before beginning any disassembly
• Remove the control panel/trim to access the old overlay; retain all hardware
• Carefully peel off the old overlay and clean residual adhesive; allow the surface to dry completely
• Align the new overlay with the display and key openings and apply evenly to avoid bubbles

The Overlay is an OEM part for Frigidaire ranges. It is a cosmetic component that covers and protects the control panel of the range. With a scratch-resistant surface, the overlay shields control buttons and displays from wear and spills in the kitchen. 

Symptoms of a bad overlay include:  

• Cracks, peels, or missing pieces in the overlay surface
• Faded or discolored graphics that are difficult to read  
• Exposed wiring or components under a broken overlay

Causes can be normal wear and tear over time, exposure to heat from the nearby cooktop, or damage from impacts or sharp objects.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This adhesive graphic overlay covers the electronic control panel, restoring clear, readable button labels and a clean, factory appearance. It helps you operate settings confidently when the original overlay becomes worn, faded, or damaged. What it does:

• Provides printed labels/icons for the electronic control's buttons and display
• Protects the control face from everyday use, spills, and cleaning
• Common symptoms: peeling edges, bubbling, cracking, discoloration, or unreadable text
• Cosmetic component; if keys don't respond, the keypad or control board may require service

• 1 adhesive control panel overlay

• Disconnect power before servicing
• Remove the control panel/EOC as needed to fully access the old overlay
• Carefully peel off the old film; remove all adhesive residue and clean the surface with isopropyl alcohol
• Test-fit alignment, then peel and apply from one edge while smoothing to avoid bubbles

This overlay is the exterior cover for the appliance's control panel, providing the labeled surface and cosmetic finish that users interact with. It restores readable button markings and protects the underlying controls from wear. What it does:

• Replaces faded, scratched, or peeled control-panel graphics so buttons and labels are visible.
• Covers and protects the underlying switch/keypad area from spills and everyday wear.
• Helps resolve user issues caused by missing or unreadable button markings.
• Restores the appliance's finished appearance when the original overlay is damaged.

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Remove any surrounding trim or bezel to access and replace the overlay.
• Handle the overlay carefully to avoid scratching the printed surface; align precisely before seating or adhering.
• If adhesive or clips are used, follow OEM instructions.

This touchpad and control panel assembly replaces the user interface that lets you set oven functions, temperature and timers. Restores button responsiveness and the visible control surface so the range responds correctly to inputs. What it does:

• Provides the front user controls and membrane touchpad for selecting bake, broil, timers and other functions
• Sends user commands to the range's control board so cycles start and settings change
• Commonly replaces panels with unresponsive or stuck buttons, missing legends, or intermittent input
• Resolves control-related problems when the display or buttons do not register presses

• Disconnect power to the appliance before servicing to avoid shock or damage
• Typical installation requires removing the oven door or control housing; handle the glass and trim gently
• Avoid touching circuit traces and connector pins; ensure connectors are fully seated
• After installation, reconnect power and test all functions before reassembling trim panels

This black control panel is the exterior face for the appliance console, restoring the unit's appearance and providing the mounting surface for touchpads, displays and trim. It replaces a cracked, faded or cosmetically damaged front panel. What it does:

• Provides the visible front surface for the console, covering and protecting switches, display and electronics
• Restores a clean, readable control surface for user controls and displays
• Replaces panels that are cracked, chipped, scratched or discolored
• Helps secure touchpads and trim in the control area

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove any trim or screws securing the old panel; retain fasteners for reinstallation
• Handle the panel carefully to avoid scratching the finish; avoid contact with circuit components
• If the panel is attached to electronic modules or overlays, follow OEM disassembly steps

This control panel is the outer console trim that covers the appliance's user interface, restoring the appearance and protecting the underlying controls. It helps keep buttons and the display secure and readable. What it does:

• Replaces cracked, warped, or cosmetically damaged console trim to restore appliance appearance
• Protects control buttons, knobs, and display from spills, dust, and everyday wear
• Helps maintain proper user access to controls and visible display
• Useful when buttons are sticking or the front surface is broken but underlying electronics are intact

• Disconnect power (unplug appliance or switch off breaker) before starting any repair
• Remove mounting screws or retainers from the old panel; handle edges carefully to avoid cuts
• Transfer any required buttons, overlays, or mounting clips only if explicitly included or reusable
• Reconnect power and verify button function and display visibility after installation