Parts for Ge JGP970BEK2BB: 02 - Gas & Burner Parts

Liquid propane

Natural gas burner orifice spud for cooktops and ranges. Installs in the burner assembly to control gas flow. Replace if damaged or converting fuel type.

Replace a worn, damaged, or missing burner orifice spud on your cooktop. This small threaded fitting controls gas flow to the burner for proper operation.

Natural gas orifice spud for cooktop burners. Installs at burner base to regulate gas flow. Replace if damaged, worn, or converting fuel type.

Burner orifice spud for cooktop or range. Installs in burner assembly to regulate gas flow. Replace if damaged, worn, or converting between fuel types.

Liquid propane

Natural gas orifice spud for cooktop burner assembly. Needed when converting from LP to natural gas or replacing damaged orifice threading.

Converting your cooktop from natural gas to liquid propane? This LP gas orifice spud enables proper fuel conversion for specific burner positions.

Liquid propane orifice spud for cooktop and range burners. Regulates gas flow for proper flame. Replace if damaged, worn, or converting from natural gas.

This 120V appliance buzzer provides the audible alert for cycle completion and user notifications, restoring clear beeps when your appliance's buzzer has failed or gone silent. Ideal for ovens, ranges, and similar appliances that use a 120V signal. What it does:

• Produces audible alerts for cycle end, error notifications, and timer signals
• Commonly replaces units that are silent, intermittently loud, or emit distorted/weak tones
• Matches the OEM electrical rating to ensure proper signalling at 120 volts
• Designed for direct replacement of the original buzzer assembly

• Disconnect power to the appliance before servicing to avoid shock hazard
• Minimal tools typically required; handle the part and wiring carefully to avoid damage

Rubber grommet that seats beneath the burner head on your gas cooktop surface. Replace if cracked, worn, or missing to keep burners level and secure.

This hold-down bracket secures a designated component inside your appliance, keeping it firmly anchored during use. Replace a bent, broken, or missing bracket to stop movement and rattling and restore proper alignment and a stable, factory fit. What it does:

• Anchors the specified part to the appliance frame/cabinet to prevent shifting
• Reduces vibration and rattling noises during operation
• Helps maintain correct alignment and spacing for reliable performance
• Replace if the bracket is bent, cracked, corroded, or missing

• 1 hold-down bracket

• Disconnect electrical power; for gas appliances, also shut off the gas supply
• Note the original orientation and screw locations before removal (a quick photo helps)
• Reuse existing mounting hardware unless your model specifies new fasteners
• Do not overtighten; verify the secured component is aligned and stable before restoring power

Support bracket that mounts under cooktop burners to provide structural stability. Replace if cracked, bent, or broken to properly secure burner assembly.

Bottom shield that protects the burner box assembly on gas cooktops. Replace if cracked, warped, or corroded to restore proper protection and appearance.

Mounting bracket secures your cooktop to the countertop or cabinet. Replace if bracket is bent, broken, or missing to ensure proper appliance installation.

Replace your cooktop's burner tube that delivers gas from the valve to the burner. Order this tube if yours is cracked, corroded, or misaligned.

Burner tube that connects gas valve to the burner assembly on your cooktop. Replace if cracked, corroded, or damaged to restore proper gas flow.

Burner tube for gas cooktops. Connects gas valve to burner head. Replace if cracked, corroded, or showing signs of gas leakage for safe operation.

Burner tube for gas cooktops. Connects gas valve to burner head. Replace if cracked, corroded, or damaged to restore proper gas flow to burner.

Includes the natural gas orifice

Includes the natural gas orifice

Natural gas orifice spud for cooktop burners. Installs at burner base to regulate gas flow. Replace if damaged, worn, or converting fuel type.

Gas pressure regulator for cooktops and ranges. Installs on the gas supply line to control flow to burners. Replace if cracked, leaking, or missing.

This replacement valve kit controls water flow into the appliance, restoring proper fill and operation. It replaces a worn or failing inlet valve assembly to help stop leaks and restore normal fill cycles. What it does:

• Opens and closes to allow water into the appliance during fill cycles
• Stops water flow when cycle is complete to prevent overfilling
• Commonly used to address no-fill, slow-fill, or continuous-fill symptoms
• Helps stop valve-related leaks when the valve assembly is the source

• One valve kit

• Disconnect power to the appliance and shut off the water supply before starting
• Handle and position the valve carefully; use appropriate hand tools
• Inspect hoses and fittings and replace any damaged seals or clamps

The Spark Module is an OEM part for GE cooktops. Located within the cooktop's control unit, this module is responsible for generating electric sparks to ignite the burners. Consisting of electronic components and wiring, the spark module works with other systems to reliably and safely light the gas or electric burners.  

Symptoms of a bad spark module include:

• Burners not lighting or lighting intermittently  
• Repeated flashing of the burner indicator lights  
• Clicking or buzzing sounds coming from the control unit

Causes of a failed spark module can be exposure to moisture, dust or debris accumulating inside the control unit over time as well as mechanical or electrical degradation of the ignition components.

This genuine OEM GE replacement part is also compatible with some Kenmore cooktop models that use GE's control systems.

This switch harness assembly is part of the surface-burner ignition system. It links the burner valve switches to the spark module so the cooktop ignites when you turn a knob, restoring consistent sparking.

• Carries the electrical signal from each surface-burner switch to the spark module
• Triggers ignition spark when a control knob is turned
• Helps resolve no-spark on one or more burners
• Can correct constant clicking/sparking from shorted or stuck switches
• Replaces heat-brittled, broken, or corroded switch wiring

• Disconnect power; for gas units, also shut off the gas supply
• Remove knobs and the appropriate top/console panels to access the harness
• Move one connector at a time to the new harness to maintain correct routing
• Inspect wire routing and insulation; test all burners for proper spark before final reassembly

Secures gas valve connections on your cooktop. Replace if loose, cracked, or causing gas leaks. Verify fit with your model number before ordering.

Maintop support plate mounts beneath your cooktop burner assembly. Replace if the original is cracked, warped, or corroded to restore stability.

Right angle

Manifold seal for gas cooktops. Prevents gas leaks between manifold and burner assembly. Replace if damaged, cracked, or causing odors. Verify fit with your model number before ordering.

Gas supply tube for cooktop burner assemblies. Replaces damaged, kinked, or corroded 7/16-inch gas tubes. Essential for safe gas line connections.

Gas tube fitting for cooktop burner systems. Connects gas supply lines. Replace if cracked, damaged, or leaking. 7/16 inch diameter tube fitting.

Replacement power cord for cooktops. Connects your cooktop to the electrical outlet. Replace if cord is frayed, damaged, or missing for safe operation.

ST10-16 X 7/16"

Replacement screw for securing panels, brackets, and internal components in ranges, ovens, and cooktops. Replace missing, stripped, or damaged screws.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Replacement mounting screw for securing panels, trim, and brackets on ranges. Needed when original screws are missing, stripped, or damaged during repairs.

Black. 8-18 AB HXW 3/8

Connects cooktop ignition components for reliable spark delivery. Replace this harness if wires are damaged, frayed, melted, or causing connection issues.

Specially formulated cleaner for ceramic glass and smooth cooktops. Removes cooked-on food, grease, and spills without scratching. Verify fit by model.