Parts for Mastercut 12AVB2M7059 / 2011: General Assembly 12Avb2 Parts

This part is a replacement sphere bearing assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a worn out, damaged, or defective sphere bearing in a variety of outdoor power equipment.Sphere bearings have a variety of uses. They are particularly useful for equipment with a high load capacity that also requires high tolerance and self-aligning ability. They can be found in a wheel assembly, transmissions, or other machinery parts. Sphere bearings are subject to significant wear and tear, requiring replacement. When working on or near to an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this sphere bearing assembly, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this sphere bearing assembly is suitable for use on several different models of small engine outdoor power equipment manufactured by MTD, Yard Machines, Cub Cadet, Yard Man, Bolens, and Troy-Bilt. This is a genuine part made of high-quality, durable materials and is sold individually.

Square nut fastener for walk-behind lawn mowers. Secures components and housing panels. Replace if stripped, corroded, or missing during maintenance.

Lower handle for push lawn mowers. Connects the upper handle to the mower deck. Replace when bolt holes are damaged, handle is bent, or cracked.

Carriage screw that secures various components on lawn mowers and snowblowers. Replace if your screw is stripped, loose, missing, or damaged during use.

This hex screw and lock washer are commonly used with lawn mowers and other small engines to secure a motor to the housing of the equipment. It is machined in such a way that it binds the manifold and frame permanently. There are occasions when these bolts have to be removed, typically when major repairs are performed on the engine. In those cases, users often find it advisable to replace the hex bolts and washers with new ones. It happens as well that these screws are so tightly fastened that they cannot be unscrewed and must be cut off. In those cases, it is necessary to replace the original screws. These replacement screws and lock washers are genuine OEM certified replacements that are manufactured to be identical to the hardware they are replacing. In addition to mowers, these hex screws are used to secure engines to devices such as log splitters, edgers, shredders, trimmers, and snowblowers. This screw is compatible with devices made by Husky, Yard-Man, Cub Cadet, Troy-Bilt, Ryobi, Bolens, and Yard Machines.

Fix mower connection issues with this adapter assembly. Connects parts for smooth operation. Common fix for component misalignment or disconnection.

Replaces worn, dull, or damaged 21-inch mulching blades on walk-behind mowers. Features curved design for effective mulching. Upgrade your rusty blade.

Metal blade support spacer that mounts between the mower blade and bolt. Secures the blade to the deck base. Replace if worn, damaged, or missing.

Hex bolt secures blade adapter and other components on lawn mowers. Replace if bolt is stripped, damaged, or missing to properly fasten parts.

Attaches to the back of your walk-behind mower deck to prevent grass and debris from reaching the operator. Replace if cracked, broken, or missing.

Fixes mower drive issues caused by damaged transmission wiring. Direct replacement wire restores self-propelled function. Simple repair for worn cables.

This adjustment lever knob is a genuine MTD part, sold individually. This adjustment lever knob can be used as a replacement part for a lawnmower. This adjustment lever knob is to adjust the operating height of the lawnmower wheel and the deck.The adjustment lever knob should be replaced if it can no longer customize the height of the lawnmower wheel and the deck or if the height of these components cannot be maintained during the standard operation of the appliance. If the knob suffers damage rendering it beyond functionality or if general wear and tear from long-term usage has left the knob non-reactive to operation, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This Adjustment lever knob is compatible with the following outdoor appliance brands: MTD, Troy-Bilt, Murray, Yard Machines, Huskee, Yard Man, and MasterCut.

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Compression spring for walk-behind mowers. Returns components to original position and absorbs energy. Replace if broken, worn, or missing.

This part is a replacement front cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a damaged or defective front cover in a variety of lawnmower models.The front cover is designed to protect the equipment's drive components and transmission from damage due to dirt or debris, which can damage the engine and transmission and prevent proper functionality. To stop this occurring, the front cover should be replaced if cracked, worn, broken, or missing. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. For more accurate information on how and where to install this front cover, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this front cover is suitable for use on several different models of lawnmowers manufactured by MTD, Yard Man, Yard Machines, and Husky. This is a genuine part made of high-quality, durable plastic and is sold individually.

Front axle retaining clip for walk-behind mowers. Secures the front wheel axle assembly. Replace if bent, broken, or missing to restore wheel stability.

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock nut may begin to weaken and may become loose or break. If it appears to be broken or weak, a replacement is required. Flange locks can be adjusted and uninstalled after use. When replacement is required, you may need a socket set, screwdriver, hacksaw, and butane torch. The socket wrench will loosen the bolt it is connected to, while the torch is used to heat the lock nut. A socket wrench may remove the nut, but sometimes cutting it with a hacksaw is required. This flange lock nut is a genuine OEM component directly from the manufacturer and comes in an individual unit. It is made of metal, a gold color, and can be found in various areas of lawn equipment. It works with lawnmowers, trimmers, snowblowers, cultivators, tillers, and leaf blowers by Poulan, MTD, Toro, Cub Cadet, Murray, Troy-Bilt, Bolens, Yard Machines, Craftsman, and Yard-Man.

Red plastic wing knob that secures the lever handle to the mower base. Replace if cracked, broken, or missing to properly hold components together.

Wing knob for lawn mowers and snow blowers. Secures chutes, bagger frames, and adjustable components. Replace if cracked, broken, or missing.

This is a replacement front axle assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part can be used to replace a broke, damaged, or malfunctioning front axle assembly on a variety of different lawnmower models. The front axle attaches to the front wheels of the lawnmower and helps transfer power from the transmission to the wheels to drive it forward. The axle is essential to proper functionality and should be replaced if damaged. Access to proper tools is required to install this part, including a flat-head screwdriver and a nut driver. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this front axle assembly, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this front axle assembly is suitable for use on several different lawnmower models manufactured by MTD, Yard Man, Yard Machines, Cub Cadet, Troy-Bilt, and Husky. This is a genuine part made of high-quality, durable materials and is sold individually.

Fixes mower that won't move forward or self-propel function fails. This transmission spur gear restores drive power. Moderate DIY repair for walk-behind mowers.

Mower losing power or not self-propelling? This spur gear transfers rotation and torque for smooth operation across different surfaces. Direct fit.

Replacement screw for gas walk-behind and self-propelled mowers. Secures components and housing panels. Needed when original is stripped or missing.

This flange lock nut is a metal component used in many types of lawn and garden equipment. It is the part that attaches to the rear wheel to keep it steady on any kind of terrain. It can also be used on handles and chutes for some equipment. The nut size is 3/8 and it has a thread size of 16. Most flange lock nuts will last for years. In some cases, the silicone ring inside the nut will wear down when it is loosened and tightened. When this happens, the flange lock nut will start to move around. It can start as minor slippage but often gets worse over time. It will need to be replaced but this is a simple task. Regardless of what equipment it is attached to, it simply needs to be unscrewed. Take off the old nut and replace it with the new one. This flange lock nut is an authentic OEM product that is sourced directly from the manufacturer. It is sold individually. The lock nut is made for use with lawnmowers, wood chippers, and edgers manufactured by MasterCut, Yard-Man, Bolens, Craftsman, Cub Cadet, Murray, Troy-Bilt, Yard Machines, MTD, and Huskee.

This is a complete wheel assembly for walk-behind and push lawnmowers. It is a single replacement wheel for the front wheels on a mower. Wheels may be damaged by impact with hard objects or from exposure to the elements over time. When the wheel is visibly damaged or otherwise does not roll as well as it should, it should be replaced.If the user is having difficulty pushing the walk-behind lawn mower, a visual inspection of the wheels will determine if a new part is required. Replacing a wheel on a lawn mower is simple. Tools including a socket set, pliers, and a screwdriver may be necessary to perform the repair.This wheel is a genuine OEM replacement part. It is compatible with MTD, Troy-Bilt, and Yard-Man machines. It is sold as an individual unit. The wheel is made of durable plastic.

Dowel pin for walk-behind lawn mowers. Fastening component used in internal machinery. Replace if worn, damaged, or missing. Sold individually.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when the screw is driven into the material. This type of screw also creates a firmer grip. This screw can also be used to secure a newly installed front cover or grill. This part is available as an individual replacement part. It is a genuine OEM part for use with specific models of snow throwers, lawn tractors, electric mowers, chippers, and log splitters from Bolens, Cub Cadet, Craftsman, Poulan, Ryobi, Toro, MTD, Troy-Bilt, Yard Machines, and Yard-Man.

This is a knob handle that is used on various types of lawn and garden equipment. It is responsible for helping to make adjustments to the upper handle of the lawnmower or other machine. If the knob handle no longer works, is broken, or falls off, adjustments can no longer be made to the equipment. If this situation occurs, the knob handle will need to be replaced.Take a look at the knob handle and determine if it has been damaged. It could have cracks, broken areas, or excessive scratches that make it hard or impossible to use. If the knob handle is not present, this also necessitates a replacement. The part is easy to replace and requires no tools to install. Simply remove the old handle and place the new one in the same location.This is an authentic OEM replacement knob handle that is directly sourced from the manufacturer. It is sold as an individual component. The knob handle is used on lawnmowers, snowblowers, string trimmers, leaf blowers, wood chippers, and edgers. It fits various models offered by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be damaged or break. When this happens, the tie will need to be replaced to ensure the cable stays on the handle.If the cable tie needs to be replaced, no tools are needed. In the situation where other parts need to be replaced at the same time, a basic set of tools and a pair of work gloves may be required. Turn off the yard equipment and place it on a stable surface before replacing the broken cable tie. The old tie can be removed so the new one can be installed before further use.This cable tie is an authentic OEM replacement part that is directly sourced from the manufacturer. This product is sold individually. The component is designed to be compatible with lawnmowers, lawn tractors, tillers, and snowblowers manufactured by MTD, Troy-Bilt, Yard-Man, and Yard Machines.

Rope guide eyebolt for lawn mower recoil starters. Guides the starter rope smoothly during pull starts. Replace if bent, broken, or missing.

Self-propel speed control cable for walk-behind mowers. Installs from control handle to transmission. Replace if frayed, broken, or stretched.

This control cable is a mower part that works with the control handle or lever bar that engages the wheels. It is also known as choke cable, brake cable, choke control, and control assembly cable. The inner wire total length is 53 inches, and the cable casing or conduit length is 40 inches. The control cable can stretch over time and it will result in a mower that moves forward slower than usual. A cable that's too corroded won't be capable of moving the drive lever. A broken or cut cable won't make the mower move. Here is a manufacturer-approved replacement control cable that's easy to install. A genuine OEM replacement part, this control cable is made to fit specific models of walk-behind mowers from Bolens, Ryobi, MTD, Troy-Bilt, and Yard-Man. It is sold individually.

This is a shoulder screw that is used to secure the handles of yard equipment. Typically, this screw is used with a matching wing nut, which is sold separately. Many different varieties of push lawn mowers have handles that fold downward for ease of storage. This is one of the locations on a mower where one will find shoulder bolts and the point at which these bolts are most likely wear out. While they are made of durable machined metal, shoulder bolts receive a great deal of wear, particularly from the handles being raised and lowered each time the mower is used. When pushing down on the mower to clear wet grass clippings or to make sharp turns with the mower, the entire weight of the mower is put on the two shoulder screws where they intersect. Since the metal of the handles can turn at that juncture, extra shearing action is put on the shoulder bolts, which can wear out. It is actually advantageous that the bolts wear out since otherwise, the handles themselves would warp and break apart. These OEM genuine replacement parts fit a number of different lawn and garden machines, including many made by Cub Cadets, Husky, Troy-Bilt, Craftsman, Yard-Man, Bolens, MTD, and Yard-Machines.

Replace a broken deck wash nozzle that prevents proper mower deck cleaning. Compatible with walk-behind, self-propelled, and riding mowers. Simple install.

This part is a replacement transmission tension spring pin. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. If the current spring pin is defective, this part can be used as a replacement. It is intended for use with a variety of lawn mower models.This spring pin is critical as it securely fastens the transmission to the mower's front deck tray. This part will need to be replaced if lost, broken, or otherwise ineffective. When working on or near an engine, always ensure that the equipment is powered off and completely cooled down before attempting to undergo any repairs. For more accurate information on how and where to install this transmission tension spring pin, the appropriate owner's manual and equipment diagrams should be referred to. This spring pin is suitable for use on a variety of lawn mower models manufactured by MTD, Craftsman, and other brands. It is a genuine OEM part and thus is made of high-quality, durable metal. Part sold individually.

Replace a missing, stripped, or damaged shoulder screw on your lawn mower or tractor. This fastener secures components and maintains proper alignment.

This replacement part is a lower tray and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. A lower tray is found in lawn mowers to help protect the user from any dangerous parts of the lower level of the appliance. A new lower tray might be needed if the current one is visibly damaged or broken including being dented, cracked, snapped, or chipped. It is not unusual for this part to become damaged as it is close to debris during use. Be sure to reference the specific user manual for more detailed instructions on how to replace this part. This repair is fairly easy and should only require common household tools. It is recommended that the user wear work gloves during this repair to minimize injury. This lower tray is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure a proper fit in many different appliances.

This is a replacement belt for self-propelled lawn and garden equipment. The belt is responsible for turning the axle that rotates the wheels when the self-propelled action is engaged. Over time, the belt can become worn with regular use. it should be replaced every season for optimal operation. There may also be instances where the belt breaks or becomes damaged and needs immediate replacement to avoid further damage. Without a working belt, the self-propelled function will not work. This genuine OEM v-belt is designed for use with a variety of 21-inch walk-behind lawn mowers and snow throwers. This belt is made of durable composite rubber material and reinforced for longer life with premium compression materials. Be careful when replacing belts and other tension parts as pinching and crushing injuries are common. Always allow the engine to cool and disengage the spark plug for safety.

Hex screw that secures components on lawn mowers, snow throwers, tillers, and chippers. Replace if stripped, rusted, missing, or damaged during repair.

This replacement part is an engine shroud. This part is a genuine replacement part made by MTD. Engine shrouds allow for more airflow to be filtered through the engine to allow for proper functionality overall. It also works to bring air into the machine like a funnel. A new engine shroud might be needed if the current one is visibly missing or damaged in any way. This can be because of normal wear and tear over time. If debris or other objects get stuck in this part it is common that many choose to replace it over repairing it. Be sure to refer to the proper user manual before attempting to replace this specific engine shroud. This engine shroud is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

Replace your lawn mower's side discharge chute if it's cracked, broken, or missing. Attaches to the side of the mower to direct grass clippings away.

Side discharge chute for walk-behind mowers. Directs grass clippings away from mower deck. Replace if cracked, broken, or missing to prevent clogging.

Hinge pin fastener for lawn mowers. Secures moving components and panels. Replace if bent, missing, or damaged to restore proper attachment and function.

Secures the chute deflector on your walk-behind mower. Replace this bracket if cracked, broken, or missing to properly mount the deflector guard.

This replacement part is a screw. This is a genuine replacement part made by MTD. A screw is a small part but important to the overall workings of many appliances. Screws work with other small pieces such as nuts and washers to keep parts in place and secure during use.A new screw might be needed if the current one is missing or damaged. This can be caused by normal wear and tear or an isolated incident. Screws endure friction over time and can become worn down.This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Secures hardware, handles, and connections on lawn equipment. Replace if stripped, corroded, or missing. Standard hex nut for various outdoor models.

This is a simple set of lawnmower ignition keys. They’re also used for an array of riding mowers, lawn tractors, and even snowblowers. To simplify repair and replacement procedures, most manufacturers use standardized keys for all their machines in a given class. As a result, a single key can be used for dozens of machines. The keys are manufactured from stainless steel, with an INDAK logo stamped into the center. Regardless of whether the machine is a walk-behind mower or a full-sized lawn tractor, a keyed ignition is easier to operate than a recoil cord. Similarly, replacing a key is generally straightforward. The exception is if the old key has snapped off in the ignition. In this case, a set of needle-nosed pliers can sometimes be used to extract the key. A powerful magnet can also be helpful if the broken key is being stubborn. In the worst-case scenario, the ignition may need to be replaced. This is an OEM part sourced directly from MTD, and it is sold as a set of two.

Replace a dead or weak lawn mower battery that won't hold charge or causes starting problems. Direct-fit 12-volt battery for walk-behind and riding mowers.

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

Grey plastic wheel hubcap for lawn mowers, snow throwers, and outdoor power equipment. Replaces cracked, broken, or missing hubcaps to protect wheel hubs.

Nozzle adapter for lawn tractors and riding mowers. Connects hoses or tubes in the fuel or deck wash system. Replace if cracked, stripped, or missing.

Fix your mower that won't self-propel or moves slowly with this forward transmission assembly. Restores proper drive speed and engagement for walk-behind mowers.