Need Help?
Call or text
Usually ships within 4 - 14 days
This replacement part is a spring. Springs create torque and ensure that components remain secure during equipment use.Due to the amount of pressure they experience during use, springs can snap over time. If a spring has become loose and no longer holds enough tension, it should be replaced.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.
This replacement part is a grip handle. This is a genuine replacement part made by Husqvarna. This grip handle allows the user to have a stronger and more secure grip while maneuvering the machine to the desired areas. A new grip handle might be needed if the current one is missing or damaged. If the handle is not up to working condition it might not feel comfortable to hold. This might mean that the user will not be able to maneuver the machine. If this is the case the grip handle should be replaced as soon as possible. The repair should be fairly easy and only require common household tools. This grip handle is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.
KIT.TRACTOR CLUTCH.OG.1.125"
This is a genuine replacement blade for select mulching riding lawn mowers. The mower/mulch blade includes a center hole for attaching to the mandrel assembly with a bolt or nut. When secured and properly sharpened, the blade will cut the grass into fine clippings that can be left behind for mulching. Over time, this blade is subjected to regular use, repetitive motion, and potential ground contact. Other damage can also occur, such as if the mower hits a stump or a rock. In the event that the blade is warped, damaged, or dull, it needs to be replaced immediately. This genuine OEM mulching mower blade is designed for use with compatible riding lawn mowers from Poulan, Jonsered, and Husqvarna. There are more than 90 models that take this blade. This durable blade is made from high-quality metal and sold as a single unit. Hardware is not included with this purchase and will have to be purchased separately if it is required. The blade can be replaced with a wrench. Be sure to disconnect the spark plug and/or battery for safety before working on the blade or other moving parts.
This shock absorber is a genuine Husqvarna part, sold individually. This shock absorber can be used as a replacement part in a lawn mower. The purpose of the shock absorber in a lawn mower is to prevent excessive motion and vibration from the steering lever so that oversteering is avoided while the lawn mower is in operation.The shock absorber in a lawn mower might need to be replaced at some point within the typical lifespan of the appliance. If the shock absorber cannot function, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This shock absorber is compatible with the following outdoor appliance brands: Husqvarna, Poulan, Jonsered, and Craftsman.
This part is a replacement control knob. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken, defective, or misplaced throttle control knob on lawn tractors.This control knob is specifically for the throttle and enables the user to easily adjust the throttle control lever. This knob may easily become detached and lost, necessitating replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this throttle control know, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this control knob is suitable for use on several models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.
The Left Hand Housing Throttle is an OEM part for Husqvarna power equipment, specifically designed to encase and protect the throttle mechanism. This housing component is crucial for the proper function and safety of equipment such as chainsaws, trimmers, and blowers, ensuring that the throttle operates smoothly and is well-protected from external elements and debris.
Symptoms of a bad Left Hand Housing Throttle include:
Causes of a bad housing throttle can stem from accidental drops or impacts during use, exposure to harsh environmental conditions that degrade the material, or general wear and tear from regular use.
Replacing a damaged or malfunctioning throttle housing is essential for maintaining the effectiveness and safety of your Husqvarna equipment, ensuring that all controls remain responsive and protected.
This part is a replacement trigger. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken trigger in trimmers and edgers.The trigger features the throttle mechanism and is essential for the user to properly control the equipment. If the current trigger is jammed or in any way broken, it should be immediately replaced. Be careful when disassembling the handle to ensure no small springs are lost. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular trigger, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality metal. This trigger can be used with a variety of trimmer and edger models manufactured by Husqvarna, Poulan, and other brands.
A combustion engine will create a lot of pressure by igniting fuel and air with a spark. It features pistons beneath the valves and the cylinder block. Between these areas are the piston rings that have many purposes that include keeping gas compression between the piston and the wall of the cylinder, keeping a layer of lubrication on the inside of the engine, allowing adequate heat transfer, and supporting the piston inside the cylinder. This replacement piston ring is designed for use in a long list of edgers, trimmers, and blowers. It is compatible with Husqvarna, Poulan, and Craftsman machines. This is an OEM replacement part that will require a complex set of steps to install properly. It will require the use of torque wrenches, plug wrenches, pliers, screwdrivers, a mallet, and more to do the repair. It ships individually.
This cable wire harness assembly is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. A cable wire harness assembly is designed for use with edgers, trimmers, or string trimmers. It is compatible with products from brands such as Husqvarna and Poulan.The cable wire harness assembly is a complete part assembly, and it includes both the throttle cable and the control wires. This item is used to run the motor as well as to adjust the engines out by linking the control handles. The replacement or repair process of the cable wire harness assembly is straight-foward, but the user replacing the part should always wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.
This is a replacement fuel check valve. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part is intended to replace a broken or faulty fuel check valve on various lawnmower models.The fuel check valve can be found in-between the grommet check valve and the hose clamp. This part prevents fuel from flowing back into the tank once the engine has been powered off. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. Proper tools may be required to replace this part, including a socket set and pliers. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this fuel check valve, reference the appropriate owner's manual and included diagrams.As an authentic replacement part, this fuel check valve is suitable for use on several different lawnmower models manufactured by Husqvarna, Jonsered and Poulan. This is a genuine part made of high-quality, durable materials and is sold individually.
This replacement part is a gear cap. This is a genuine replacement part made by Husqvarna. This part is small but used to keep different gears within the lawnmower safe and secure during use. This part is made of durable plastic and meant to be a strong protector for many gears. A new gear cap might be needed if the current one is missing or damaged in any way. This can include being dented, bent, cracked, or chipped. If the gear cap is not able to stay in place, it might be time to replace it. Be sure to wear work gloves during this repair. It is also recommended that the user refers to the appropriate user manual before replacing this part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit and long-lasting use.
This replacement part is a cable drive and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Cable drives allow the user to control the transmission during.A new cable drive might be needed if the user is not able to control the transmission with the current cable drive. It is common that this part become damaged after years of normal wear and tear as it is a heavily used part in lawn mowers. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
Attaching to the front lift link, this washer is a component for use with lawn tractors. A washer is a component that is used with a screw fastener. Its purpose is to keep the screw from loosening by distributing the load over a larger area. A new washer may be needed if the user has mistakenly misplaced the original. When dealing with small parts, it's a good idea to place them in a container so that they are not lost. The washer could physically break over time due to normal wear and tear. If this is the case, it will need to be replaced so that the screws do not loosen. The repair person may choose to wear gloves to protect his or her hands during the replacement process.This washer is sold individually. It is an OEM part that is sourced directly from the manufacturer. It's compatible with lawn tractors that are manufactured by the Husqvarna, Poulan, and Craftsman brands.