Parts for Ge DFE28JSHFSS: Ice Maker & Dispenser Parts

Removes contaminants from your refrigerator's water and ice. Replace every 6 months or when the filter indicator activates. Confirm fit with your model.

Replacement screw secures panels, trim, brackets, and internal components in your refrigerator. Needed when original is missing, stripped, or corroded.

Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.

The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.

Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.  

Symptoms of a bad Cover Latch include:

• Visible cracks or breaks
• The latch handle not being properly covered
• Difficulty in operating the latch handle
• Loose or missing cover latch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ice Box Door Assy is an OEM part for GE refrigerators. It is the complete door assembly housing the storage bins for ice cubes on the fresh food door. 

The Ice Box Door Assy keeps ice conveniently accessible while maintaining cold air containment in the fresh food section.

Causes can involve normal wear over time from frequent use. Accidental dings or impacts can also damage fresh food door components.  

Symptoms of a bad Ice Box Door Assy include:

• Difficulty opening or closing the ice box door
• Improper sealing letting warm air enter the freezer
• Damage or cracks in the plastic door assembly

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

This spring feeler arm is the replacement sensing arm used with the refrigerator ice maker assembly to detect ice level and help actuate the ice-making mechanism. Restores proper ice sensing and helps prevent overfill or stoppage. What it does:

• Acts as the ice maker's feeler/bail arm to detect when the ice bin is full or empty.
• Triggers the ice maker to stop or continue cycles based on ice level.
• Helps prevent overfilling and reduces ice production problems caused by a bent or broken arm.
• Can stop erratic ice maker behavior when the original arm is damaged or worn.

• Disconnect power to the refrigerator before beginning any repair.
• Handle the arm carefully and inspect the ice maker mounting points for damage before installation.
• Reuse factory hardware if undamaged; replace any stripped or missing fasteners.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice maker won't stop making ice or won't make any? This feeler arm senses ice levels to control production. Fixes overfilling and no-ice issues.

The Icemaker Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for producing and dispensing ice cubes. It includes all necessary components for ice production, ensuring your refrigerator has a consistent supply of ice.

Causes of a bad icemaker assembly can include wear and tear over time, mineral buildup from hard water, electrical issues affecting the control module, or damage to the mechanical components.

Symptoms of a bad Icemaker Assembly include:

• No ice production
• Ice cubes being smaller than usual or irregularly shaped
• Leaks or water pooling inside the freezer
• Unusual noises coming from the icemaker

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Fix loose components or rattling sounds in your refrigerator with this lock washer. Simple 10-minute fix for securing bolts and preventing vibration.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.

Ice not dispensing or dispensing slowly? This refrigerator ice dispenser auger agitator moves ice from the bucket to the chute. Moderate DIY repair.

The Coiled Cold Water Tank is an OEM part for GE refrigerators. This part is responsible for storing and cooling the water that is dispensed through the refrigerator's water dispenser. It ensures that you have access to refreshing cold water whenever you need it. The coiled design allows for efficient cooling and helps maintain the desired temperature of the water.

A bad coiled cold water tank can occur due to wear and tear, leaks, or other factors. If you notice symptoms such as water not being dispensed properly, frozen water, or leaks around the tank, it may be time to replace it with a new one.

Symptoms of a bad coiled cold water tank include:

• Improper water dispensing
• Frozen water tank
• Leaks around the tank

Ensure the availability of dispensed cold water by replacing the faulty coiled cold water tank with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Fix water dispensing issues with this refrigerator water valve cover and tank assembly. Addresses leaks and flow problems. Moderate DIY repair.

Ice maker stopped making ice? This dual water inlet valve controls flow to both the ice maker and water dispenser. Common DIY fix for no ice production.

Water leaking from connections? This locking clip secures 1/4-inch tubing in push-to-connect fittings on refrigerator water and ice systems.

Fix water leaks at tubing connections with this 5/16-inch quick-connect clip. Secures water lines to prevent accidental release in dispenser and icemaker systems.

Ice bucket and crusher assembly stores and crushes ice in your refrigerator's freezer. Replace if cracked, jammed, or not dispensing properly. Verify fit with your model number before ordering.