Parts for Ikea IX7DDEXGZ002: Icemaker And Ice Container Parts

The Ice Container Assembly is an OEM component for Whirlpool refrigerators. It is the bin that collects and stores ice produced by the ice maker. With its precise design and durable construction, the ice container allows ice cubes to easily drop down through the chute from the ice maker.

Causes of a bad ice container assembly can include cracks or broken parts that prevent proper operation. Over many uses, normal wear and tear may compromise its ability to effectively store and retain ice.

Symptoms of a bad ice container assembly include:

• Ice cubes dropping outside of the container and accumulating elsewhere  
• Difficulty removing cubes from the container
• Cracks or openings that compromise insulation and cause premature melting

This replacement is also compatible with Kenmore, KitchenAid, and select Maytag models.

This fan scroll is the blower housing that directs airflow from the blower motor to the appliance's ducts, helping maintain proper circulation. It replaces a damaged or warped housing to restore efficient airflow and reduce noise. What it does:

• Channels air from the blower motor into the appliance air path for cooling or venting.
• Helps maintain consistent temperatures and airflow for proper operation.
• Can reduce vibration or rubbing noises caused by a cracked or deformed housing.
• Supports the blower motor assembly and seals the motor-to-duct interface.

• One fan scroll / blower housing.

• Disconnect power to the appliance before starting any repair.
• Installation may require removal of the blower motor and nearby panels; handle motor and impeller carefully.
• Inspect and reuse or replace any required mounting hardware, gaskets, or seals as needed—only what explicitly ships is included.
• If you hear unusual noises after installation, recheck alignment and clearance between the impeller and the scroll.

The Motor-Evaporator is an OEM part for Whirlpool refrigerators. It powers the cooling system responsible for maintaining proper internal temperatures. The evaporator motor functions by circulating refrigerant through coils located behind the refrigerator liner. 

Symptoms of a bad motor evaporator include:

• Fluctuating interior temperatures
• Inability to achieve desired cooling levels
• Ice buildup caused by inefficient airflow
• Unusual noises or vibrations from the cooling system

Causes of failure relate to wear and tear of internal motor components over time. Replacement ensures optimized temperature performance through consistent operation of refrigerant circulation.

This OEM Whirlpool part is also compatible with Kenmore, Maytag, Jenn-Air, and some KitchenAid models.

This ice box divider fits inside the refrigerator's ice container to separate sections and guide ice to the dispenser. Replacing a cracked or missing divider helps prevent jams and keeps cubed or crushed ice dispensing the way it should.

• Separates the ice bin interior and channels ice toward the auger/dispenser path
• Helps maintain proper cubed/crushed ice selection and flow
• Reduces spillover and clumping that can block dispensing
• Common symptoms of failure: poor or no ice dispense, inconsistent cubed/crushed output, or ice overflowing inside the bin

• Disconnect power and turn off the water supply before servicing
• Remove the ice bin, empty remaining ice, and locate the internal divider
• Transfer any reusable hardware/clips and install the new divider in the same orientation
• Reinstall the bin, restore power, and test both cubed and crushed dispense

This gasket for the damper assembly provides a replacement seal that helps keep compartments properly isolated and reduces air leakage. Replacing a worn gasket restores more consistent airflow and supports stable internal temperatures. What it does:

• Seals the damper opening to reduce unwanted air transfer between compartments.
• Helps the damper close and regulate airflow for more consistent temperature control.
• Common symptoms of a failing gasket: temperature swings, frost or moisture buildup, and noisy or improperly closing damper.
• Restoring a proper seal can improve cooling consistency and help avoid overworking the compressor.

• Disconnect power to the appliance before attempting service.
• Remove interior items and any trim panels needed for damper access; use gentle prying to avoid damage.
• Seat the new gasket fully into the damper groove and verify smooth damper movement before replacing panels and contents.

The Whirlpool ice dispenser motor is an OEM replacement part responsible for driving the mechanism that dispenses ice from the ice maker in a refrigerator. This motor is typically located within the ice container assembly, where it powers the auger or paddle responsible for pushing ice cubes through the dispenser chute and into a container or glass. When a user activates the ice dispenser on the refrigerator's exterior, the motor engages, causing the auger or paddle to rotate, delivering ice efficiently.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

• Failure to dispense ice when the ice dispenser is activated.
• Unusual noises, such as grinding or squeaking, coming from the ice dispenser.
• Slow or intermittent ice dispensing, resulting in inconvenience for users.
• Ice cubes getting stuck or jammed in the dispenser chute.

This ice dispenser solenoid assembly engages the dispenser mechanism to switch between crushed and cubed ice. A worn or failed solenoid can prevent the selector from changing modes or stop ice from dispensing smoothly.

• Actuates the ice bucket/crusher selector to allow cubed or crushed ice
• Failure may cause only one ice option to work, no change between modes, or intermittent dispensing
• Can resolve loud clicking/buzzing from the dispenser area when switching options
• Helps restore proper ice dispensing performance

• Disconnect power before servicing the dispenser area
• Access is typically through the freezer door dispenser chute/ice bucket area
• Note actuator linkage orientation during removal to ensure correct reassembly
• After installation, test both crushed and cubed selections

This mounting bracket secures internal panels and components to restore proper alignment and support. It replaces a worn or broken bracket to reduce rattling and keep parts correctly positioned for safe operation. What it does:

• Provides a stable attachment point for panels or assemblies
• Stops movement that can cause rattling, noise, or misalignment
• Restores proper fit between connected parts after damage or wear
• Helps prevent strain on adjacent components that can lead to failure

• High-level replacement: remove nearby panels or fasteners to access and swap the bracket
• Use correct fasteners and torque; replace any damaged clips or screws
• Disconnect power before working on electrical appliances and follow safety procedures

The Spacer is an OEM component specifically designed for Whirlpool side-by-side refrigerators. Located within refrigerator door walls, it maintains precise alignment between internal insulation and outer door panels.

Causes of a bad spacer include cracks or breaks developing from repeated door openings and closings. Prolonged very low temperatures can also make plastic prone to snapping.

Symptoms of a bad spacer include: 

• Misaligned or loose door walls and panels
• Cold air leakage around the door perimeter
• Difficulty closing doors completely flat
• Visible broken pieces inside door walls

This OEM Whirlpool replacement spacer restores critical door insulation integrity. Its durable construction supports tight door seals to maintain interior climate control.

Replace yours if any issues arise. This part is also compatible with some GE, Crosley, and select Kenmore side-by-side models. Reliable seal performance relies on an OEM spacer replacement when failing.

This Arm-shut is the OEM shut arm that secures and guides the appliance door so it closes and latches correctly, helping the unit operate safely and reliably. It restores proper door movement and engagement when the original arm is worn or damaged. What it does:

• Guides and supports the door during opening and closing so the latch can engage
• Holds the door in the closed position for normal operation
• Prevents door misalignment that can cause leaks, error codes, or failure to start
• Replaces a bent, broken, or worn shut arm that interferes with proper door closure

• One Arm-shut

• Disconnect power (and water if applicable) before starting any repair
• Basic hand tools required; follow the appliance service manual for disassembly
• Inspect surrounding hinge, latch, and strike for wear and alignment and replace if needed

This is the small extension that attaches to the ice maker's shut-off arm. It lengthens the arm so the ice bin can reliably raise/lower the arm to stop ice production when full and resume when space is available.

• Extends the ice maker's shut-off/bail arm for proper bin detection
• Helps prevent ice maker overfilling when the bin is full
• Can resolve issues like continuous ice production, overfilling, or ice not stopping
• Restores original fit and function on compatible ice maker assemblies

• Disconnect power and shut off water supply before servicing
• Access the ice maker, then slide/clip the extension onto the shut-off arm as directed by your model's service info
• Ensure the arm moves freely and properly actuates the ice maker switch
• Restore power and verify the arm stops ice production when raised

The Wire Harness is an OEM part for Whirlpool refrigerators. It connects the icemaker to the refrigerator's electrical system, ensuring proper voltage and function.

A bad icemaker wire harness can occur due to wear and tear, accidental damage, or electrical issues. If you notice symptoms such as no ice production, intermittent ice production, or the icemaker not receiving power, it may indicate a faulty or damaged wire harness.

Symptoms of a bad icemaker wire harness include:

• No ice production
• Intermittent ice production
• Icemaker not receiving power

Restore your refrigerator's icemaker by replacing the faulty wire harness with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This impinger assembly directs heated airflow inside the oven/microwave cavity to help promote even cooking and consistent heating. It replaces a damaged or warped air baffle to restore proper airflow distribution. What it does:

• Routes and evens airflow across the cooking cavity to help reduce cold spots
• Helps maintain consistent internal temperatures during operation
• Prevents hot air from short-circuiting around food for more uniform results
• Replaces cracked, warped, or missing air-baffle components that impair airflow

• Disconnect power to the appliance before starting any repair
• Use appropriate hand tools and take care to avoid sharp sheet-metal edges
• Inspect mounting clips/fasteners and replace if damaged; follow OEM fitment orientation

The Ice Maker Assembly is an OEM part for Whirlpool refrigerators, designed to replace your fridge's original ice-making unit. This assembly is responsible for ensuring a consistent and reliable supply of ice, featuring components such as the ice mold, the water inlet valve, and the ice ejector arms. 

Causes for a malfunctioning Ice Maker Assembly can range from mineral build-up in the water filter or inlet valve, to mechanical failures in the motor or electrical components. 

Symptoms of a bad Ice Maker Assembly include:

• Failure to produce ice
• Producing smaller or misshapen ice cubes
• Leaking water inside the freezer compartment
• Noisy operation or strange sounds during the ice-making process

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: IF ICEMAKER IS NOT COMPATIBLE WITH UNIT ORDER ICEMAKER KIT PART# W10882923 IT COMES WITH ALTERNATE MODULE COVER AND HARNESSES PER MELODY AT WHIRLPOOL PARTS