Parts for Lg LFXC22596S/01: Ice Maker / Ice Bin Parts

This is a replacement screw used to secure appliance panels, trim, and small components so damaged or missing fasteners don't leave parts loose. It restores proper fit and reduces rattling and movement. What it does:

• Secures panels, trim pieces, or internal components to restore proper fit
• Stops panels from shifting or vibrating during use
• Replaces stripped, corroded, or missing screws that prevent proper assembly
• Helps eliminate rattling noises caused by loose fasteners

• One replacement screw as pictured

• Unplug the appliance or shut off power before installing
• Use the correct screwdriver or bit to avoid stripping the head
• Hand-start the screw, then snug—do not overtighten to avoid cracking plastic parts
• If screw threads are damaged, replace with the exact OEM screw to ensure proper fit

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models. 

The Drain Pipe Assembly is an OEM replacement part for LG refrigerators. It is a plastic tubing system that collects and removes liquid condensation from evaporator coils. Proper drainage is crucial to minimizing frost buildup and ensuring optimal cooling of food storage areas. 

Symptoms of a bad drain pipe assembly include:

• Excessive frost or ice accumulation inside the refrigerator
• Puddling or leaks detected near evaporator housing
• Slow draining allowing water to pool versus emptying fully
• Cracks or breaks in the tubing prevent complete fluid removal

Causes are typically mineral sediment clogging drainage paths or deteriorating plastic from constant use. This OEM LG replacement pipe restores reliable condensate removal to maintain peak efficiency.

This OEM LG part is also compatible with Sears/Kenmore. 

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This is an ice storage bucket that collects and holds cubed ice from the refrigerator ice maker, making it easy to dispense and store ice for daily use. It replaces a cracked, warped, or missing ice bin to restore proper ice handling. What it does:

• Collects and stores ice produced by the ice maker so cubes are ready to dispense
• Guides ice to the dispenser/door chute or manual access area to prevent spills
• Prevents ice jamming caused by broken or deformed bins
• Helps keep ice contained and sanitary inside the freezer compartment

• Disconnect power before servicing the ice maker area to avoid injury
• Remove any remaining ice before removing the old bucket to reduce spills
• Align bucket tabs/guides and slide into place until it seats naturally; do not force
• If ice does not dispense after install, check ice maker alignment and clear ice chute

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This roller assembly supports and guides a sliding rack, shelf, or drawer so it rolls smoothly along its track. Replacing a worn roller restores easy, even movement and helps prevent sticking, wobbling, noise, or the rack/drawer jumping off the rail.

• Provides rolling support for a sliding component on its rail
• Maintains alignment to reduce binding and off-track jams
• Helps the rack/drawer glide quietly and evenly
• Common signs to replace: hard-to-slide movement, squeaking/grinding, wobble or tilt, or a cracked/missing wheel

• Disconnect power before servicing; shut off water supply if applicable to your appliance
• Remove the rack/drawer to access the roller; support moving parts while working
• Note roller orientation and re-use existing fasteners/clips as designed
• Replace both sides for even operation

The Freezer Tray Roller is an OEM part for LG refrigerators. It is a dual roller wheel assembly located at the rear wall of the freezer compartment. The roller aids sliding shelf movement by reducing friction between trays and the liner wall. 

Causes of a bad freezer tray roller include cracks, flat spots, or separated roller pieces from wear over years of use.

Symptoms of a bad tray roller are:

• Difficulty sliding shelves smoothly in and out of position
• Excessive force required to access stored items
• Noisy operation or rattling noises within the freezer

This genuine LG OEM replacement part is also compatible with some Kenmore models.

This tray assembly is the replacement drawer pan that supports and contains items inside the refrigerator drawer, restoring proper storage and a secure sliding surface for the drawer. It helps keep foods contained and prevents sagging or cracking. What it does

• Replaces a cracked, warped, or missing drawer tray to restore a stable surface for stored items
• Supports the refrigerator drawer so it opens and closes smoothly and stays aligned
• Helps contain spills and prevents food from falling onto lower compartments
• Fits into the existing drawer frame and works with original slides and seals

• Disconnect power to the appliance before starting any repairs
• Remove the drawer and slides per the refrigerator's service instructions before swapping the tray
• Handle plastic components carefully to avoid cracking; use gentle pressure when seating the new tray

This Drawer Tray Assembly replaces a damaged or worn refrigerator drawer tray to restore proper storage and support for drawer contents. It provides a stable, easy-to-clean surface so drawers slide and seat correctly. What it does:

• Replaces a cracked, warped or broken drawer tray that lets food fall through or catch debris
• Restores a smooth, level surface so the refrigerator drawer opens and closes properly
• Helps contain spills and makes routine cleaning easier
• Fits into the existing drawer housing to support produce, deli items, and other stored foods

• Unplug the appliance or disconnect power before beginning any work.
• Empty the drawer and remove it per the refrigerator's service instructions before replacing the tray.
• Align the tray with the drawer housing and seat it firmly; do not force parts to avoid damage.

This Drawer Tray Assembly replaces a damaged or worn refrigerator drawer tray to restore proper storage and support for drawer contents. It provides a stable, easy-to-clean surface so drawers slide and seat correctly. What it does:

• Replaces a cracked, warped or broken drawer tray that lets food fall through or catch debris
• Restores a smooth, level surface so the refrigerator drawer opens and closes properly
• Helps contain spills and makes routine cleaning easier
• Fits into the existing drawer housing to support produce, deli items, and other stored foods

• Unplug the appliance or disconnect power before beginning any work.
• Empty the drawer and remove it per the refrigerator's service instructions before replacing the tray.
• Align the tray with the drawer housing and seat it firmly; do not force parts to avoid damage.

This right-side refrigerator shelf assembly replaces a damaged or missing shelf to restore safe, level storage and keep foods organized. Tough construction supports deli containers, leftovers and other everyday items. What it does

• Provides a flat, stable storage surface on the refrigerator's right side
• Replaces cracked, chipped or broken shelves that allow items to tip or fall
• Restores original spacing so doors and drawers close and seal properly
• Helps maintain organized storage to prevent spills and contamination

• One right-side refrigerator shelf assembly

• Unplug or power off the appliance before removing or installing parts
• Remove food and clean the area; lift shelf straight out of its supports to avoid chipping
• Handle glass or edges carefully; use two people for heavy or awkward shelves

Note: Shelf is on the LEFT side. 

This shelf net is a replacement mesh shelf designed to support lightweight items and produce in your refrigerator while allowing airflow. It restores storage organization and prevents small items from falling through broken or stretched shelving. What it does:

• Replaces torn, stretched, or missing mesh shelving to restore a secure, breathable shelf surface
• Helps keep small containers and produce stable and contained on the shelf
• Maintains airflow across the shelf area to help even cooling
• Fits into existing shelf brackets or frame to replace the original netting

• Unplug or disconnect power and remove food and containers from the shelf area before installing
• Remove the old net by releasing any clips or fasteners, then position the new net into the shelf frame or brackets
• Install by snapping or fastening into place; avoid overstretching the mesh to prevent premature wear

This shelf net is a replacement door shelf retainer that helps keep small, loose items secure and visible in the refrigerator door. It restores the original storage barrier so bottles, cans, and jars stay in place. What it does:

• Replaces a cracked, stretched, or missing door shelf net that no longer holds items securely
• Prevents small containers and packages from shifting or falling when the door opens
• Restores original appearance and storage function of the door shelf area
• Fits into the existing shelf frame and secures items without blocking visibility

• One shelf net

• Remove all items from the affected door shelf before installing
• Install by snapping or sliding the net into the existing shelf frame per the OEM layout
• No electrical disconnection required, but handle shelves and trim carefully to avoid breakage

This TV cover assembly replaces the outer cabinet panel that protects internal electronics and restores the television's appearance and structural support. Use it to repair cracked, broken, loose or missing covers and to reduce rattling or exposed components. What it does:

• Protects internal circuit boards, connectors and speakers from dust and damage
• Replaces cracked or damaged cabinet panels that cause cosmetic issues or expose components
• Stops loose or rattling panels that can create noise during operation
• Restores mounting points and alignment for screws and internal assemblies

• Always unplug the TV and allow time for internal capacitors to discharge before starting work
• Handle the assembly carefully to avoid scratches; use appropriate screwdrivers for mounting hardware
• Keep track of screws and small parts during removal; replace any damaged fasteners

This tray assembly fits the refrigerator fresh room to support the crisper/drawer area and help contain spills. Replacing a cracked or warped tray restores smooth drawer movement and helps keep produce organized. What it does:

• Provides a stable support surface for the fresh room/crisper drawer.
• Helps contain drips and small spills to prevent messes in lower compartments.
• Restores even drawer sliding and reduces binding, rattling, or misalignment caused by a damaged tray.
• Fits specific fresh room assemblies.

• Unplug the refrigerator or switch off power before servicing to avoid electrical hazard.
• Remove the fresh room/crisper drawer to access the tray; the tray typically lifts or slides out.
• Retain any clips or fasteners and reinstall them with the new tray as needed.

This Tray Cover Assembly replaces a damaged or missing tray cover to restore a finished appearance and proper protection for the underlying tray area. Designed to fit and align with the original mounting points for a secure fit. What it does:

• Covers and protects the appliance tray from spills, debris, and everyday wear
• Helps maintain correct spacing and alignment of tray components
• Restores the original look where the tray cover is cracked, warped, or broken
• Stops light drafts or minor leaks by resealing the tray perimeter (when part is intact)

• One tray cover assembly

• Install with appliance powered off and water/ice supply turned off if working near dispenser or ice components
• Align tabs and mounting points, then press or fasten according to original hardware—do not force parts into place
• Inspect surrounding clips and screws; replace damaged fasteners to ensure a secure fit

This cover tray is the molded plastic top/cover that protects and contains the unit's internal tray area, helping keep components clean and guiding condensate or collected material into the tray. Replaces cracked, warped or missing tray covers to restore proper containment and appearance. What it does

• Covers and protects the appliance's internal tray area to prevent debris from entering internal components.
• Guides liquid or collected material into the tray for proper containment.
• Helps maintain correct fit and alignment of adjacent panels and parts.
• Common symptom: visible cracks, warping, loose fit or missing cover causing spills or debris entry.

• Disconnect power and remove any water or debris from the tray area before replacing the cover.
• Inspect surrounding tabs and mounting points for damage; replace any broken fasteners for a secure fit.
• Handle the plastic cover carefully to avoid cracking; hand-tighten any screws to avoid stripping.

The Deli Drawer Front Cover is an OEM part for LG refrigerators. It provides an attractive facia that protects the internal components of the deli drawer. This cover is designed to integrate with the style and finish of the refrigerator interior. 

Symptoms of a bad Deli Drawer Front Cover include: 

• Cracks, chips, or other visible cosmetic damage
• Discoloration that detracts from the aesthetics  
• The cover is loose, misaligned, or missing
• Difficulty opening or closing the deli drawer

Causes of a bad cover can be normal wear and tear over time from repeated use, as well as accidental drops or impacts that cause cracks or breaks.

This OEM replacement part is also compatible with select LG models.

The Refrigerator Air Filter Cover is an OEM replacement part for LG refrigerators. It provides a protective casing for the refrigerator's air filter. The air filter cover makes filter replacement easy while allowing uniform airflow distribution for optimal cooling and freshness. 

Causes of a bad air filter cover can include cracks or breaks from normal use over time. Screws or securing mechanisms may also become loose.

Symptoms of a bad air filter cover include:

• Cool air escaping without circulating properly
• Inability to easily access the air filter for replacement  
• Excessive refrigeration coil or evaporator fan noise

This OEM LG part is also compatible with Sears/Kenmore models. 

This Vegetable Tray Assembly replaces a damaged or worn crisper drawer tray to restore a stable storage surface for fruits and vegetables and keep the crisper area organized. Fits where the factory tray sits under the vegetable drawers. What it does:

• Provides a stable shelf for vegetable and fruit bins so drawers slide and store correctly
• Supports crisper drawers and prevents sagging or cracking from everyday use
• Helps maintain proper drawer alignment to reduce rubbing or binding when opening/closing
• Addresses symptoms like a cracked or warped tray, unsecured drawer, or uneven drawer movement

• Disconnect power to the refrigerator before working on internal components
• Remove crisper drawers and any contents; lift out the old tray and set the new tray into the same position
• Handle plastic parts carefully to avoid cracking; do not force parts into place—ensure proper alignment with tracks
• Reuse only the screws/clips that match the OEM locations; replace damaged fasteners before returning the appliance to service

This lamp cover is the replacement light lens that protects and diffuses the appliance's internal lamp, restoring even illumination and shielding the bulb from moisture and debris. It's a direct-fit exterior lens for the lamp assembly. What it does:

• Protects the interior lamp from dust, moisture and impact to help prevent bulb damage
• Diffuses and directs light for even illumination inside the compartment
• Restores a cracked, yellowed or missing lens to improve visibility
• Helps maintain the lamp assembly's proper fit and alignment

• One lamp cover / light lens

• Power off and unplug the appliance before beginning any service
• Remove lamp bulb per manufacturer instructions before replacing the cover to avoid damage
• Use proper tools and handle the lens gently to avoid scratching or cracking
• If mounting clips or screws are worn or missing, replace them separately

This Tray Cover Assembly replaces a damaged or missing cover on the appliance tray to help contain contents and keep the tray functioning correctly. It restores the tray's protective surface and helps prevent spills or contamination. What it does:

• Covers and protects the tray surface to keep contents contained
• Helps direct contents into the tray area to reduce spills
• Replaces cracked, warped or broken covers that no longer seat properly
• Restores a flush fit and appearance for the tray area

• One tray cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the tray or access panel per your model's service instructions to access mounting points
• This part typically snaps or slides into place; light tools (screwdriver) may be needed to remove retaining clips

This rail guide assembly supports and guides a sliding drawer or rack, restoring smooth, stable opening and closing. It replaces a worn or damaged guide to help prevent sticking, misalignment, or detachment. What it does:

• Guides and supports a sliding drawer or rack so it moves smoothly along its track
• Keeps the rack/drawer aligned to prevent tipping or binding
• Reduces noise and rough movement caused by a damaged guide
• Helps restore proper function when the drawer or rack slips off its track or won't close fully

• Disconnect power and remove any items from the drawer/rack before starting
• Remove panels or trim as needed to access the guide; basic hand tools are typically required
• Install the new guide in the same orientation as the original and confirm smooth travel before reassembling

This guide rail assembly replaces a worn or damaged drawer slide to restore smooth, aligned operation and reduce sticking or sagging. It provides stable support for the drawer and helps maintain proper track movement. What it does:

• Guides the drawer along its track for smooth opening and closing
• Restores proper alignment to prevent binding, sagging or uneven travel
• Reduces rattling and scraping noises caused by damaged rails
• Helps the drawer fully seat and latch correctly for secure use

• One guide rail assembly

• Disconnect power and remove contents before servicing the drawer area
• Loosen or remove clips/screws securing the old rail, then slide out and replace with the new assembly
• Use basic hand tools; avoid forcing parts to prevent damage

This freezer door foam assembly restores the insulated core inside a freezer door to help the door maintain proper cold retention and reduce frost. It replaces damaged or compressed foam that can compromise the door's thermal barrier. What it does:

• Replaces the insulated foam core inside the freezer door to improve thermal performance
• Helps reduce frost buildup and uneven temperatures caused by degraded door insulation
• Supports a tighter door fit by restoring original door thickness and shape
• Works with the existing door liner and outer panel to re-establish proper sealing

• Disconnect power to the appliance before starting any repairs.
• Removal of the inner door liner or outer panel is commonly required; handle panels and clips carefully to avoid damage.
• Use proper tools and keep small fasteners organized; inspect door gasket and hardware while the door is open.

This freezer door foam assembly restores the insulated core inside a freezer door to help the door maintain proper cold retention and reduce frost. It replaces damaged or compressed foam that can compromise the door's thermal barrier. What it does:

• Replaces the insulated foam core inside the freezer door to improve thermal performance
• Helps reduce frost buildup and uneven temperatures caused by degraded door insulation
• Supports a tighter door fit by restoring original door thickness and shape
• Works with the existing door liner and outer panel to re-establish proper sealing

• Disconnect power to the appliance before starting any repairs.
• Removal of the inner door liner or outer panel is commonly required; handle panels and clips carefully to avoid damage.
• Use proper tools and keep small fasteners organized; inspect door gasket and hardware while the door is open.

This left-side door handle trim restores the finished appearance and edge protection on compatible refrigerators. It replaces cracked, scratched or missing trim to help the handle sit flush and improve the door's cosmetic finish. What it does

• Covers and protects the outer edge of the left door handle area
• Replaces cracked, broken or cosmetically damaged trim pieces
• Helps the handle sit flush and maintain a clean, finished look
• Works with the original mounting points and hardware

• One left door handle trim

• Remove contents from the door and support the door before beginning work
• Use basic hand tools to remove existing trim and secure the replacement to existing screw holes
• Do not force or bend the trim; align to original mounting points to avoid damage

This decor handle is the exterior trim piece for a refrigerator door that restores the original look and grip. It replaces cracked, scratched, or worn trim to improve appearance and provide a finished surface where the handle mounts. What it does:

• Replaces damaged or worn decorative handle trim to restore the appliance's appearance
• Covers and protects the handle mounting area from dirt and wear
• Helps provide a consistent grip surface along the door's edge
• Addresses cosmetic issues like scratches, chips, or fading

• Remove any tape or packaging and match the piece to the door before starting
• Support the door or work with a second person if needed to avoid stress on hinges
• Basic hand tools (screwdriver or nut driver) may be required to remove and reinstall mounting hardware
• Follow OEM instructions and disconnect power only if instructed for models with electrified door components

This hinge cap covers and protects the door hinge, keeping the hinge assembly clean and improving the appliance's appearance. It replaces a cracked, missing, or worn hinge cover to help doors operate smoothly and look finished. What it does:

• Covers the door hinge to protect mating surfaces from dirt and damage
• Hides hinge hardware for a cleaner, finished look
• Helps prevent debris from interfering with hinge movement
• Can resolve cosmetic issues and reduce risk of snagging on exposed hinge parts

• One hinge cap

• Remove power and open the door to a safe, supported position before starting
• Typically snaps or screws onto the hinge—retain original fasteners unless replacement required
• Inspect hinge and fasteners while installing; replace any damaged hardware

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

The Handle Assembly is an OEM part for LG refrigerator freezer compartments. It includes the handle and mechanical components that operate the freezer drawer.

Causes of a bad handle assembly can include fatigue from repeated opening and closing motions, damage sustained from heavy loads, or exposure to harsh chemicals over years of use.   

Symptoms of a bad handle assembly include:

• Handles detaching from the drawer front  
• Difficulty smoothly opening and closing the freezer drawer
• Inability to fully open or close the drawer
• Excessive play, wobble, or loose motion in the handle

Replace yours today with this genuine OEM LG assembly to restore effortless operation. This replacement handle is compatible with Frigidaire, Samsung, Whirlpool, and some Kenmore models.

This door foam assembly is the molded insulating foam that fits inside the refrigerator door to help maintain interior temperature and reduce unwanted heat transfer. It restores the door's insulation performance for more consistent cooling and efficiency. What it does:

• Replaces deteriorated or compressed foam that can reduce the door's insulation value
• Helps reduce warm spots, condensation, or frost buildup on the door interior
• Supports consistent cabinet temperature by restoring proper door thermal barrier
• Works behind the inner door liner to fill the cavity and maintain correct spacing

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing the door inner liner and any door shelves or hardware first.
• Handle the foam carefully to avoid tearing or deforming; ensure proper orientation and full contact with the liner when installing.
• Use appropriate fasteners or adhesive as specified by the OEM; before reassembly.

This door assembly replaces the outer door for the refrigerator's built-in home bar compartment, restoring a proper seal and appearance so the bar area closes and insulates correctly. Designed to match OEM fit and function. What it does:

• Replaces a damaged, dented, or warped home bar door to restore proper closure
• Helps maintain interior temperature of the bar compartment by ensuring a good seal
• Resolves issues with the door not latching or sitting flush
• Restores original appearance and finish of the bar access area

• One complete home bar door assembly

• Professional or experienced DIY recommended—door assemblies can be heavy and awkward to handle
• Disconnect power to the appliance before starting any repairs
• Keep fasteners and hinge hardware organized; follow OEM alignment for correct sealing

This replacement home bar case is the inner door shelf that holds bottles and small items in the refrigerator door, restoring storage function and a finished interior look. It fits the refrigerator's dedicated home/bar compartment. What it does:

• Provides a secure shelf for bottles, cans, and small containers in the door's home/bar area
• Restores proper spacing and support so items sit level and stay in place
• Replaces cracked, broken, or missing door-shelf housings that cause items to fall or rattle
• Helps maintain the refrigerator's intended interior organization and appearance

• One home bar case (single inner door shelf housing)

• Remove food and items from the door before replacing; handle glass or plastic shelves carefully
• Usually installs with snap-in tabs or a small number of screws—do not force parts; align tabs before pressing
• If your door has wiring or lighting nearby, disconnect power to the refrigerator before working on the door

This replacement home bar door gasket creates an airtight seal around the refrigerator's beverage/access compartment to help maintain cold temperatures and reduce drafts and moisture buildup. What it does:

• Seals the home bar/door compartment to help keep cold air in and warm air out
• Reduces condensation, frost buildup and temperature fluctuations in the compartment
• Helps prevent spoiled items and improves cooling efficiency when functioning properly
• Addresses symptoms like visible gaps, air leaks, excess moisture, or a door that won't close tightly

• Clean the door channel and gasket seating area of debris and old adhesive
• Press the gasket evenly into the channel, working around the door to ensure full contact
• Test the door for an even seal and adjust as needed; unplug refrigerator only if required for access or safety

The refrigerator door gasket seals the gap between the door and cabinet to keep cold air in and humid air out, helping maintain temperature, reduce frost and condensation, and restore a tight, reliable door close.

• Creates an airtight perimeter seal to prevent warm air leaks
• Helps stabilize interior temperature and humidity
• Minimizes frost buildup and condensation around the door
• Common symptoms: torn or deformed seal, door not sealing, moisture/frost near door, rising temps

What's included: 1 door gasket Installation notes:

• Disconnect power before servicing
• Allow the new gasket to warm to room temperature; soften in warm water or with gentle, low heat to relax folds
• Remove the old gasket and thoroughly clean the mounting channel/mating surfaces
• Seat the new gasket starting at the corners, then along the sides; ensure it's fully engaged and even all around, and check door alignment/seal

Restore a tight, reliable seal on your refrigerator door with this replacement gasket. A fresh gasket stops cold-air leaks that lead to frost, condensation, and temperature swings—helping your fridge run smoothly and keep food at the right temperature. What it does:

• Seals the gap between the door and cabinet to keep cold air in and warm air out
• Helps maintain consistent interior temperature and humidity
• Reduces frost and condensation around the door opening
• Common symptoms: torn or warped gasket, door not closing flush, moisture at the seal, frost buildup, or the unit running more than usual

• 1 door gasket

• Disconnect power before starting and clear items from the door
• Lay the new gasket flat and gently warm it (hot water or low-heat hair dryer) to relax folds
• Starting at the corners, press the gasket lip fully into the door channel and work evenly around
• Perform a paper-slip test around the perimeter and adjust door alignment if needed; avoid overheating the gasket

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

This replacement door basket restores usable storage space on the refrigerator door, holding bottles, jars and small containers so food stays organized and easy to reach. Made to match the original fit and mounting points. What it does:

• Replaces a cracked, broken or chipped door basket that can no longer hold items securely
• Restores proper storage and keeps bottles and containers from shifting or falling
• Replaces missing or warped bins that prevent the door from sealing or organizing contents
• Compatible with factory mounting clips and shelf support locations

• Remove all food and loose items from the door before installing the new basket
• Most door baskets snap into place on molded supports; align tabs and press until secured
• Inspect mounting clips or supports for damage; replace clips if they are broken

This door basket is the refrigerator door bin that mounts on the inner door panel. Replacing a cracked, loose, or missing bin restores safe, organized storage for bottles, condiments, and other small items on your refrigerator door.

• Provides stable door storage for condiments, beverages, and small items
• Attaches to molded tabs/rails on the door liner
• Restores capacity and organization when the original bin is damaged or missing
• Common symptoms: bin falls off, won't stay seated, wobbles, or is cracked

• Remove contents, then lift the old bin straight up to release from the door tabs
• Align the new bin with the door rails/tabs and press down until fully seated
• Handle plastic at room temperature and avoid forcing to prevent cracking
• Confirm secure engagement before reloading items

Replacement refrigerator door basket that restores usable storage on the door and keeps bottles, jars and condiments secure. Molded plastic design replaces a cracked or broken bin so items stay organized and won't fall when the door opens. What it does

• Provides a shelf on the refrigerator door to hold bottles, jars and small containers
• Replaces cracked, chipped or warped door bins that no longer secure items
• Helps prevent spills and shifting items when opening or closing the door
• Use only on compatible models; fit with your model number before ordering

• Remove all items from the door and lift or slide out the old basket
• Install the new basket by aligning tabs/runners and snapping it into place; do not force
• Inspect mounting tabs—if damaged, replacement may require additional clips
• Dispose of broken plastic pieces carefully and keep children away during replacement

The door basket is an OEM part for LG refrigerators. It is the basket located inside the refrigerator or freezer door that provides storage for smaller items like condiments, spreads, or snacks. The basket measures approximately 12" width x 3 1/4" height x 3 1/4" depth. 

Symptoms of a bad basket include:

• The door basket being loose, cracked, or damaged
• Difficulty removing or replacing the basket 
• Reduced storage capacity due to a warped or broken basket

Causes of a bad door basket can be normal wear and tear over time, exposure to excessive weight that stresses the plastic material, or accidental damage from dropping or impact.

This OEM LG part is also compatible with select Sears/Kenmore models.

Lower hinge assembly that supports the refrigerator door and provides a secure pivot point for smooth opening and closing, helping maintain proper door alignment and seal. What it does:

• Provides the pivot and support for the bottom of the refrigerator door to open and close smoothly.
• Keeps door aligned to help maintain an effective seal and reduce gaps that can cause cooling loss.
• Prevents door sag and uneven wear on the door and cabinet when functioning correctly.
• Addresses symptoms such as a crooked or dragging door, rubbing at the gasket, or noisy pivoting.

• Unplug the appliance and remove food and shelving from the door before beginning work.
• Support the door securely while removing the old hinge to avoid damage or injury.
• Keep original mounting hardware—replace with manufacturer hardware if needed.

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

STOPPER ASSEMBLY,DOOR

This door stopper mounts at the hinge to limit the refrigerator door's opening angle and provide a positive stop. Replacing a worn stopper helps protect the hinge, prevent over-swing, and promote a smooth, even door seal.

• Limits door opening at the hinge to prevent overextension
• Helps maintain door alignment and consistent gasket contact
• Reduces impact that can loosen hinges or damage the cabinet
• Common symptoms: door swings too far, clunks at full open, doesn't stop smoothly, or shows visible wear at the stop

• Disconnect power and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners as needed to access the stopper
• Install the new stopper in the same orientation; tighten hardware securely
• Verify door swing and sealing after reassembly

The Lower Refrigerator Door Hinge is an OEM part for LG refrigerators. This hinge supports the refrigerator door, allowing it to open and close smoothly while maintaining proper alignment. It is designed to handle the weight of the door and ensure a secure and stable operation over time.

Causes of a bad lower refrigerator door hinge can include regular wear and tear, physical damage from overloading or impacts, and gradual loosening over time. A faulty hinge can lead to misalignment, difficulty in opening or closing the door, and potential damage to the door seal.

Symptoms of a bad lower refrigerator door hinge include:

• The door not closing properly or staying open
• Sagging or misaligned door
• Unusual noises when opening or closing the door
• Gaps in the door seal, causing cooling inefficiency

This OEM LG part is also compatible with Sears/Kenmore models.

This refrigerator door handle assembly restores a solid, comfortable grip on the fresh food door. Replace a loose, cracked, or missing handle to improve door operation and refresh your refrigerator's appearance.

• Provides the handhold used to open and close the refrigerator door
• Attaches to existing door mounting studs and fasteners
• Common symptoms: handle broken, cracked, loose/wobbly, or missing; difficulty opening due to failed handle
• Built to match the original fit and look on applicable models

• Unplug the refrigerator and wear gloves to protect hands
• Loosen the set screws or fasteners securing the old handle; remove and retain any reusable hardware
• Position the new handle on the mounting studs; tighten fasteners evenly until snug—do not overtighten
• Reinstall any decorative caps if present

Replace a worn, loose, or broken refrigerator door handle with this complete handle assembly. It restores a secure, comfortable grip so you can open and close the refrigerator door easily while maintaining the unit's original look. What it does:

• Attaches to the refrigerator door to provide a sturdy handhold
• Replaces cracked, broken, or missing handles
• Helps correct a loose or wobbly handle that won't stay secure
• Restores the factory appearance of the door

• 1 refrigerator door handle assembly

• Disconnect power and protect the door surface with tape or a cloth before starting
• Remove any trim/caps as needed and loosen the hidden set screws or mounting bolts on the old handle
• Position the new handle, then tighten fasteners evenly—do not overtighten
• Reinstall any caps/trim and ensure the handle is secure

This button assembly is the user interface component that replaces worn or unresponsive control buttons on the appliance control panel, restoring normal button feedback and selection control for cycles and features. What it does:

• Provides the tactile/button contact surface for the appliance control panel so button presses register correctly
• Restores proper input for cycle selection, start/pause, and option buttons when original buttons are damaged or worn
• Can resolve symptoms like unresponsive or sticking buttons and intermittent button activation
• Works as the direct replacement part designed to fit the OEM control overlay and button housing

• One button assembly as shown

• Disconnect power to the appliance before starting any repair to avoid shock or unintended operation
• Access may require removing the control panel or console; handle the control ribbon/cable and plastic tabs carefully to avoid damage
• Keep small screws and clips organized; test button operation before reassembling fully

This connector rail secures and routes electrical connections in the appliance, keeping wiring organized and supporting reliable connections for proper operation. It helps prevent loose harnesses and reduces strain on wiring during use. What it does:

• Provides a stable mounting point for wire harness connectors and plugs
• Maintains correct alignment and spacing of electrical connections
• Reduces stress on wiring to help prevent intermittent connections
• Commonly used when loose or damaged connector mounts cause power or control issues

• Disconnect power and unplug the appliance before starting any work
• Handle connectors and wiring gently to avoid damaging pins or insulation
• Reinstall in the original orientation and secure mounting fasteners snugly

This connector rail is a small mounting piece that holds and aligns a connector assembly inside the appliance, helping maintain a secure electrical or structural connection for reliable operation. It replaces a worn, cracked, or damaged rail to restore proper fit and alignment. What it does:

• Provides a secure mounting point and alignment for the appliance connector assembly
• Helps maintain stable electrical/contact connections by preventing connector movement
• Common symptom indicators: intermittent connections, loose harness fit, or related component misalignment
• Prevents wear on mating connectors by keeping components properly supported

• One connector rail

• Disconnect power (unplug appliance or shut off circuit breaker) before starting
• Access may require removing trim, panels, or nearby components
• Inspect mating connectors and harnesses for damage and replace if needed
• Use common hand tools; handle plastic parts gently to avoid cracking during installation

This slide rail guides and supports a rack or drawer as it moves in and out of your appliance. Replacing a worn rail restores smooth, stable operation and keeps the rack or bin aligned on its track.

• Provides the track and support for a sliding rack, bin, or drawer
• Maintains alignment to prevent tilting, binding, or derailing
• Helps ensure smooth, quiet motion during opening and closing
• Common symptoms: hard to open/close, uneven travel, scraping/clicking noises, rack/drawer popping off the track

• Disconnect power (and water, if applicable) before servicing
• Remove and empty the rack/bin/drawer to access the rail
• Note orientation and transfer any stops/end caps or screws from the old rail if reused
• Secure the new rail and test for smooth travel before reassembly

The Rail, Slide is an OEM part for LG refrigerators. These rails are responsible for allowing shelves and drawers to smoothly glide in and out of the refrigerator compartment. They are designed with precise tolerances and durable materials to withstand frequent use while retaining their smooth operation over time. 

Causes of bad rails can include dents, scratches, or damage accumulated from years of use and repeated opening and closing of shelves/drawers. Wear and tear of moving parts can also cause rails to malfunction. 

Symptoms of bad rails include:

• Shelves or drawers that don't slide smoothly
• Items getting stuck or jammed when trying to remove them from the fridge 
• Gapping or misalignment of shelves/drawers in their tracks
• Noisy or grinding sounds coming from rail areas

This OEM LG part is also compatible with Kenmore models.

This harness assembly restores the electrical connections between components, replacing a damaged or worn wiring harness to help re-establish reliable power and signal paths for the appliance. What it does

• Replaces a damaged or frayed wire harness that can cause intermittent or no power to components
• Restores factory wiring routes and connector fit to ensure correct electrical signaling
• Prevents shorts or open circuits caused by broken wires or loose terminals
• Helps resolve symptoms like components not powering, erratic operation, or connector damage

• One harness assembly as shown

• Disconnect power and any water supply before starting; confirm appliance is fully de-energized
• Compare connectors and wire lengths to the original part before installation
• Route harness along factory clips and secure fasteners to prevent pinching or chafing

This ice maker gear drives the ejector blades that push ice from the tray into the bin. Replacing a worn or broken gear restores proper harvest cycles and stops grinding or slipping during ejection. What it does:

• Turns the ice maker ejector to release ice cubes during the harvest cycle.
• Stops or reduces grinding noises and slipping when the gear teeth are stripped or damaged.
• Helps restore regular ice production when the ejector no longer rotates.
• Works as the replacement driven gear in compatible LG ice maker gear trains.

• Disconnect power before servicing the ice maker to avoid shock or injury.
• Remove the ice maker assembly to access the gear; follow OEM instructions for disassembly.
• Inspect the mating gear, motor shaft, and ejector assembly for wear—replace additional damaged parts as needed.
• Use the matching part number to ensure fit.

This center door hinge assembly replaces the pivot that lets a refrigerator door open and close smoothly, restoring proper door alignment and sealing. Designed to fit OEM mounting points for reliable operation and long-term use. What it does:

• Supports the center door pivot and maintains proper door alignment
• Enables smooth opening and closing of the affected door section
• Helps maintain an effective door seal to prevent cold air loss
• Commonly used when the door sags, binds, or makes noise at the hinge

• 1 center hinge assembly

• Installation requires removing the door and supporting it to prevent damage or injury
• Tighten mounting fasteners to the manufacturer's torque specifications; avoid over-tightening
• Disconnect power to the appliance and follow all safety precautions before beginning work

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This upper hinge assembly secures and guides the appliance door at the top hinge point, restoring proper door alignment and smooth opening. Replaces a worn or damaged upper hinge to reduce door sag, binding, or uneven sealing. What it does:

• Supports the top of the door and provides the pivot point for opening and closing
• Restores correct door alignment to improve gasket sealing and energy efficiency
• Eliminates rubbing, binding, or uneven movement caused by a damaged hinge
• Reduces noise from a loose or worn hinge

• Unplug the appliance and empty or support the door before starting work
• Use proper hand tools and take care not to tighten fasteners excessively
• Keep track of hardware; replace only listed items unless additional parts are required

This upper hinge assembly secures and guides the refrigerator door at the top, restoring proper alignment and smooth opening. Replace a worn hinge to stop sagging doors and improve sealing and operation. What it does:

• Provides the top pivot point for the refrigerator door, keeping it aligned during opening and closing
• Restores proper door clearance and prevents rubbing or misalignment
• Helps maintain a tight door seal to reduce cold air loss
• Addresses symptoms like a sagging or uneven door, noisy movement, or difficulty closing

• Disconnect power to the appliance before beginning repairs to prevent injury.
• Support the door while removing and installing the hinge to avoid dropping or damage.
• Use appropriate hand tools; do not overtighten fasteners to prevent stripping.

This upper hinge assembly secures and guides the refrigerator door so it opens and closes smoothly and stays properly aligned. Replaces a worn or damaged upper hinge to reduce door sag and improve sealing performance. What it does

• Supports the top of the refrigerator door and provides a pivot point for opening and closing.
• Restores proper door alignment to help the gasket seal evenly and maintain cooling efficiency.
• Reduces rubbing, grinding, or noisy operation caused by a worn hinge.
• Helps prevent uneven wear that can lead to door sag or difficulty closing.

• Unplug the appliance and empty or support the door before removing the hinge to prevent injury or damage.
• Use proper hand tools; keep track of fasteners and any spacers or bushings that come off with the hinge.
• Check gasket condition and door alignment during reassembly; adjust per the service manual if needed.

This cap assembly replaces a damaged or worn dryer exhaust duct cap to restore proper venting and help keep pests and debris out of the ductwork. Fits the dryer's exterior duct outlet and guides hot, moist air outside. What it does:

• Seals and covers the dryer exhaust opening to reduce air leaks and backflow
• Directs exhaust airflow out of the home for proper drying performance
• Helps block pests, leaves and debris from entering the vent system
• Reduces moisture buildup and associated odor or lint accumulation near the duct opening

• One cap assembly

• Disconnect power (and gas supply on gas dryers) before beginning any work
• Remove the old cap and clean the surrounding duct and mounting surface before installing
• Secure with the existing fasteners or compatible screws and seal edges with foil HVAC tape if needed
• Inspect the connected ducting and lint trap while replacing the cap; replace damaged duct sections for best performance

This lever return spring restores proper tension to the lever assembly so the control or latch returns smoothly. A direct-fit replacement designed to restore normal lever movement and function. What it does:

• Provides return tension for the lever to ensure reliable latch or control movement
• Helps stop the lever from sticking or remaining engaged after use
• Restores smooth, consistent operation when the original spring is worn or broken
• Commonly replaced when lever movement feels loose or fails to return

• One spring lever

• Disconnect power (or unplug) and follow appliance safety procedures before servicing
• Access may require removing panels or the control/door assembly; keep fasteners organized
• Inspect mating lever and pins for wear; replace damaged components to prevent repeat failure

The Door Handle Holder Assembly is an OEM replacement part for LG refrigerators. It contains the internal brackets and mounting hardware required to securely attach the refrigerator door handles.

Causes of a faulty door handle holder assembly include wear from years of use, broken or stripped screws, or cracks in the plastic from heavy pulling or slamming.

Symptoms of a problematic door handle holder assembly are:

• Loose, wobbly or disconnected door handles  
• Difficulty opening the refrigerator door 
• Handles that do not stay flush or feel secure

This OEM LG replacement is compatible with select Kenmore side-by-side refrigerator models as well.

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

The Dispenser Lever is an OEM part for LG refrigerators. It operates as the primary method of dispensing ice and water through the dispenser compartment. The lever is an ergonomic handle that allows for easy activation of the dispenser with a simple push or pull motion.

Causes of a bad dispenser lever include broken hinges or joints from excessive force or repeated use over time. The plastic levers can also crack or break due to impact.

Symptoms of a bad dispenser lever include:

• The lever being stuck in the up or down position
• Difficulty activating or using the lever to dispense
• Cracks or breaks in the plastic housing

This OEM LG part is also compatible with some Kenmore models.

This door magnet is the magnetic gasket strip that helps the door close securely and maintain an airtight seal, improving cooling efficiency and preventing leaks or temperature loss. What it does:

• Restores the magnetic attraction in the door seal so the door stays closed
• Helps maintain proper internal temperature by providing an airtight seal
• Reduces frosting, condensation, and energy waste caused by a weak or damaged seal
• Common symptom: door not sealing or closing firmly

• Disconnect power to the appliance before starting any repair
• Remove the door gasket or trim per the service manual to access the magnet strip
• Press or seat the magnet strip into the gasket channel; some models may require adhesive or fasteners—refer to OEM instructions

The Compressor is an OEM component specifically designed for LG refrigerators. Located inside the refrigerator compartment, the compressor pressurizes and circulates refrigerant through the cooling system. Through precisely timed operation, the compressor maintains optimal freshness.

Symptoms of a bad compressor include:  

• Elevated interior temperatures failing to efficiently chill
• Loud buzzing or vibrating noises coming from inside the walls  
• Frost buildup indicating ineffective cooling cycles
• Complete cooling system failure leaving foods unpreserved

Causes involve refrigerant leaks, blocked airflow to the compressor, or simply wear over tens of thousands of hours of use breaking down moving components.

This OEM LG part is also compatible with some refrigerator models from Kenmore and Sears. Replace to restore reliable, long-term temperature control keeping contents at peak freshness.

A small retaining pin used to secure moving parts and keep components aligned for smooth operation. Replacing a worn or broken common pin can stop rattling and restore proper fit between linked parts. What it does:

• Holds or aligns two parts together so they move correctly and stay in position
• Helps prevent rattling, looseness, or parts slipping out of place
• Works as a simple mechanical fastener—no electronics involved

• One common pin

• Disconnect power to the appliance before beginning any service
• Keep track of small parts; lay out components in order to aid reassembly
• May require removal of trim or a hinge/retainer to access the pin—use basic hand tools
• If the pin is difficult to seat, do not force; inspect mating parts for damage

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This motor support damper sits between the refrigerator's compressor and base to absorb vibration and movement. Replacing a worn damper helps quiet rattles and humming from the back of the cabinet and keeps the compressor properly supported.

• Cushions the compressor to reduce transmitted vibration and noise
• Helps quiet humming, buzzing, or rattling from the lower rear of the refrigerator
• Maintains proper compressor alignment and support on the base pan
• Common signs of wear: increased vibration/noise, a cracked or flattened damper, or noticeable compressor movement when running

• Unplug the refrigerator and pull it forward to access the rear; allow the compressor to cool before working
• Support the compressor to remove load from the mount before loosening hardware
• Replace the damper and tighten mounting hardware evenly without over-compressing the rubber
• Avoid bending or stressing refrigerant tubing; wear gloves and eye protection

This Front Cover Assembly replaces a damaged or worn front panel to restore the appliance's appearance and protect internal components. It provides a secure, finished surface around the door and control area for safe, reliable use. What it does:

• Replaces cracked, scratched, or broken front panel material that affects appearance and fit
• Protects internal components and wiring from debris and moisture
• Restores proper alignment and sealing around the door/control area
• Helps reduce vibration-related rattles caused by a loose or damaged front panel

• One Front Cover Assembly

• Disconnect power (and gas supply if applicable) before starting any work
• Removal typically requires unscrewing fasteners and releasing retaining clips; keep track of all hardware
• Support the cabinet/front panel during removal and installation to avoid dropping or pinching wiring
• Test the appliance after installation to ensure secure fit and normal operation

This compressor damper is a vibration-isolating mount that sits between the sealed-system compressor and the chassis. It cushions the compressor to reduce noise, limit vibration transfer, and help keep refrigerant lines from being stressed.

• Isolates the compressor from the frame to absorb start/stop shock and vibration
• Helps reduce humming, rattling, or buzzing from the back/bottom of the appliance
• Replaces a damper that's cracked, flattened, hardened, or missing
• Can help if the compressor rocks or the unit vibrates excessively

• Disconnect power and pull the unit forward for access; remove rear/service panel if present
• Support the compressor to relieve load on the mounts before removing fasteners
• Match orientation; transfer any sleeves/spacers from the old damper to the new one
• Ensure the compressor sits level and that tubing is not strained before restoring power

Replacement front cover that restores your appliance's exterior finish and helps protect controls and internal components from everyday wear, spills, and minor impacts, delivering a clean, finished look and proper front-panel fit. What it does:

• Covers and protects the appliance's front area, helping shield controls and wiring from dirt and moisture.
• Restores damaged or cracked front trim for improved appearance.
• Helps maintain proper alignment and fit of the front assembly.
• Common symptom: cracked, chipped, warped, or loose front panel that exposes internal parts or looks worn.

• Disconnect power (unplug or switch off breaker) before starting any repair.
• Basic hand tools (screwdriver set) may be required to remove the old cover and install the replacement.
• Handle edges carefully to avoid cuts; align tabs/clips and secure fasteners snugly but do not overtighten.

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This condenser assembly connects and secures the refrigerator condenser components, helping the cooling system run reliably. It replaces damaged or corroded condenser wiring to restore proper condenser function and airflow. What it does:

• Provides the OEM-configured wiring and mounting for the condenser to ensure consistent electrical connection.
• Restores proper condenser operation when original wires are cut, burnt, corroded, or loose.
• Helps prevent intermittent cooling or compressor issues caused by faulty condenser connections.
• Maintains correct routing and strain relief for condenser lines to reduce wear and chafing.

• One condenser assembly with attached wiring and mounting hardware as shown.

• Recommended for technicians or confident DIYers; disconnect power before starting and unplug the appliance.
• Inspect surrounding components for damage; replace any compromised parts.
• Use proper tools and tighten mounting hardware to OEM torque where specified; avoid pinching wires.

The Evaporator Fan Blade is an OEM replacement part for LG refrigerators. It is a key component located inside the refrigerator that works to circulate cold air evenly throughout. The fan blade spins rapidly to distribute chilled air from the evaporator coil and refrigeration system, ensuring proper airflow and consistent temperatures across all shelves and compartments.  

Symptoms of a bad evaporator fan blade include:

• Inconsistent or improper interior cooling temperatures 
• Hot or warm spots developing inside the refrigerator
• Strange noises such as clicking or grinding emanating from the rear wall

Causes of a bad evaporator fan blade can be wear and tear over time, an accumulation of dust or debris on the blades restricting airflow, or accidental damage like dents or cracks to the blades affecting their ability to spin smoothly.

This OEM LG part is also compatible with select Sears/Kenmore brand models.

The Condenser Fan Blade is an OEM replacement part for LG refrigerators. The condenser fan motor blade is located on the condenser fan motor which is usually located on or near the compressor at the back of the refrigerator. This part is responsible for circulating air over the condenser coils. This helps to remove heat from the condenser and evaporate water in the defrost drain pan.

Causes of blade failure can include normal wear over extended runtime, accumulated dirt and dust impeding airflow, or physical impact damage.

Symptoms of a faulty condenser fan blade include:

• Refrigerator fails to properly cool and maintain temperatures
• Condenser unit runs excessively as heat fails to dispel
• Abnormal noises such as grinding or squealing emanate from the condenser area

This OEM LG part is also compatible with some Sears/Kenmore model refrigerators.

This grille assembly covers and protects the refrigerator's evaporator/condenser fan while directing airflow for proper cooling. It restores a clean look and keeps wiring and fan blades shielded from debris and accidental contact. What it does:

• Protects the fan and nearby components from dust, debris and accidental contact
• Directs airflow for consistent cooling performance in the appliance
• Helps reduce vibration and rattling noise by holding the fan area secure
• Commonly replaced when grille is cracked, broken mounting tabs fail, or airflow is obstructed

• One grille assembly (fan)

• Designed to mount with existing factory screws and clips; inspect fasteners and replace if damaged
• Power off and unplug appliance before accessing fan area to avoid electrical shock or injury
• Handle plastic tabs gently to avoid breakage during removal and installation

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

The Evaporator Fan Motor Assembly is an OEM replacement part for LG refrigerators. This assembly is responsible for circulating cold air from the evaporator coils throughout the refrigerator and freezer compartments. By doing so, it ensures that both compartments maintain the desired temperatures and that the cooling process is efficient.

Causes for a malfunctioning Evaporator Fan Motor Assembly can include motor wear from continuous operation, electrical issues like faulty wiring, obstructions preventing the fan blades from turning, or damage to the fan blades themselves.

Symptoms of a bad Evaporator Fan Motor Assembly include:

• Inconsistent temperatures in the refrigerator or freezer compartments
• Unusual noises, such as humming or buzzing, coming from the back of the refrigerator
• Reduced cooling efficiency, leading to food spoiling faster
• Frost buildup in the freezer due to poor air circulation

This OEM LG part is also compatible with Sears/Kenmore model refrigerators.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

• One cover motor

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Damper motor support secures the damper motor assembly inside the refrigerator, keeping the air-control damper aligned so it opens and closes correctly. Replacing a damaged support restores proper airflow control and reduces noise. What it does:

• Secures and positions the damper motor assembly so the air-control damper moves smoothly.
• Keeps the motor and damper aligned to help prevent rattling, grinding, or loose motor noise.
• Supports consistent airflow between compartments to assist with even cooling.
• Resolve damper movement problems like the damper not opening or closing fully.

• Disconnect power to the appliance before starting work; remove food and shelves as needed for access.
• Remove the interior access panel to reach the damper assembly; handle plastic tabs and clips gently to avoid breakage.
• Align the motor and damper during reassembly and secure all fasteners; test damper operation before replacing panels and shelving.

This damper motor support replaces a broken or warped mount for the refrigerator's air damper assembly. It holds the damper motor and door securely so the system can meter freezer air into the fresh food compartment.

• Secures and aligns the air damper motor/door within the duct
• Helps ensure proper opening/closing of the damper to regulate airflow and temperature
• Damage can contribute to a warm or too-cold refrigerator and inconsistent temperatures
• May cause clicking or buzzing from the damper area or a visibly loose assembly

• Disconnect power to the refrigerator before servicing
• Access the damper behind the fresh food compartment duct/cover; remove shelves as needed
• Note wiring and orientation; transfer the existing damper motor and door to the new support and reuse fasteners
• Ensure the door moves freely and seals before reassembly; restore power and verify airflow

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

This door stopper cushions and limits the travel of a refrigerator door to prevent slamming and reduce wear on the hinge and cabinet. Replaces a worn or broken stopper to restore smooth, controlled door movement. What it does:

• Acts as a bumper and travel limiter to prevent the door from hitting the cabinet
• Absorbs impact to reduce noise and protect hinge components
• Helps the door close and align properly when opening and closing
• Commonly replaced when cracked, missing, or excessively worn

• Turn off and unplug the appliance or disconnect power before starting any work
• Remove the hinge or door trim as needed to access the stopper following the manufacturer service instructions
• Replace the stopper by removing the old piece and securing the new stopper in the same position; retain original fasteners unless replacement is required

The SWITCH, MAGNET is an OEM part for LG refrigerators. It is a switch designed to function in conjunction with the magnetic door seal, indicating to the refrigerator when the door is open or closed. This allows the refrigerator to regulate temperatures properly based on door positioning. 

Symptoms of a bad switch, magnet can include:

•  Temperature control issues, with the fridge struggling to maintain proper coolness levels
•  The fridge fails to switch to energy-saving modes when the door is closed 
•  Lights not turning on or off correctly when the door is opened or closed

Replace yours today with this genuine OEM LG part to ensure consistent and reliable temperature control. This OEM LG part is also compatible with Sears/Kenmore.

This door switch cover houses and protects the refrigerator/freezer door switch, keeping the switch secure and aligned so the interior light and door-sensing functions work reliably. It's a direct-fit replacement for damaged or cracked covers. What it does:

• Protects the door switch from impacts, spills, and debris that can cause intermittent contacts or failure
• Keeps the switch properly positioned so the interior light turns on/off when the door opens and closes
• Helps ensure consistent door-sensing for control logic that manages defrost and cooling cycles
• Reduces the risk of moisture reaching the electrical switch components

• One door switch cover

• Power off and unplug the appliance before beginning any repair to avoid shock or damage
• Handle gently to avoid breaking the plastic tabs; some models use snap-in tabs or screws for mounting
• Verify switch alignment and operation before fully reassembling the door trim
• Replace the switch assembly as needed

This sheath-style heater melts frost from the evaporator during automatic defrost cycles to keep airflow clear and temperatures stable. Replacing a failed heater helps stop recurring ice buildup and restore consistent cooling performance.

• Heats the evaporator to melt accumulated frost/ice during defrost
• Keeps air passages clear to maintain proper temperatures
• Helps prevent frost-packed evaporator covers and reduced cooling
• Common symptoms: heavy frost behind the freezer panel, fan noise from ice contact, weak cooling, long run times

• Disconnect power before servicing; allow any sharp edges to be avoided with cut-resistant gloves
• Access is typically behind the freezer's rear interior panel; remove shelves/drawers and panel to reach the evaporator
• Transfer any clips/sensors attached to the heater in the same positions; avoid bending fins or puncturing refrigerant lines
• Ensure connectors are fully seated and the heater is secured before restoring power and monitoring operation

This DC motor assembly powers a fan inside your appliance to move air where it's needed. Replacing a weak or failed motor restores proper airflow for stable temperatures and reliable performance. What it does:

• Drives a fan blade to circulate air within the appliance
• Supports consistent temperatures and efficient airflow
• Common failure signs: fan not running, intermittent operation, or grinding/squealing noises
• Contribute to poor cooling/heating and fan/motor-related error codes

• Includes: 1 DC motor assembly

• Disconnect power to the appliance before servicing
• Access the fan area, note wire routing/orientation, and remove mounting fasteners
• Transfer the fan blade and any mounting hardware from the original motor if needed
• Ensure the blade spins freely and connectors are fully seated before reassembly and power-up

This main PCB power control board assembly manages the appliance's power distribution and control functions to restore normal operation when the original control board fails. It provides the electronic control backbone for cycle and power management. What it does:

• Regulates and distributes electrical power to the appliance's major systems.
• Interprets user inputs and controls cycle timing, sensors and outputs.
• Can cause the appliance to be unresponsive, fail to start, or exhibit random resets when faulty.
• May trigger error codes or abnormal operation tied to control or power faults.

• Disconnect power before attempting any diagnostics or replacement.
• Observe electrostatic discharge (ESD) precautions and handle the board by its edges.
• Verify the part number on the existing board matches this assembly before installation.

The Cover Assembly is an OEM part for LG French door refrigerators. This assembly covers the electronic display area on the refrigerator door. 

Symptoms of a bad cover assembly include:

• Cracks, chips, or breaks appearing in the cover material
• Poor fitment leading to light leaks or dust entry
• Loose mounting causing noise or inadvertent opening
• Discoloration or damage reducing aesthetic appeal

Causes of failure can include impact damage from repeated door openings, heat and weathering effects over time breaking down surface finishes, or normal wear through extensive usage cycles.

Replace yours today with this genuine OEM LG cover assembly to restore your refrigerator's presentation and functionality. Proper covering maintains the performance of temperature and function controls behind a durable fascia. This replacement part is also compatible with Frigidaire and Kenmore french door models.

This ice maker lever is the mechanical arm that controls ice production by interacting with the ice maker's on/off and level-sensing mechanism. Replacing a broken or missing lever restores proper operation and helps prevent overfilling or no-ice conditions.

• Acts as the ice maker's shut-off arm to regulate ice production
• Lowers to allow ice making; raises to stop when the bin is full
• Common symptoms: ice maker won't stop making ice, no ice when arm is stuck up, broken/missing lever, lever won't stay in position
• Helps ensure consistent, reliable ice production control

• Disconnect power and shut off water before service
• Remove the ice bin to access the ice maker; gently release the lever from its pivots/linkage
• Note lever orientation; transfer and reuse any original springs, clips, or fasteners
• Reinstall components, restore power, and verify free up/down movement of the arm

This refrigerator ice maker assembly automatically fills, freezes, and harvests ice cubes into the bin. Replacing a failed ice maker restores steady ice production and proper shutoff when the bin is full.

• Automates the ice-making cycle: fills the mold, freezes water, and ejects cubes into the bin
• Monitors bin level and stops production when full
• Helps address symptoms such as no ice production, not cycling/harvesting, or cubes not ejecting
• Can also help with intermittent or inconsistent ice output

• Unplug the refrigerator and shut off the water supply before servicing
• Remove the ice bin, unfasten mounting screws, and disconnect the wire harness
• Transfer existing brackets or covers if required; reconnect harness and secure the assembly
• Align the fill tube with the icemaker inlet; restore power/water and allow up to 24 hours for normal ice production

The Ice Maker Assembly Kit is an OEM part for LG refrigerators. This assembly is responsible for producing ice and includes the necessary components for a complete installation. It works by freezing water in a mold and then releasing the ice cubes into the ice bucket, ensuring a steady supply of ice.

Common causes of a bad ice maker include clogged water lines, malfunctioning motors or gears, and general wear and tear over time.

Symptoms of a bad ice maker assembly include:

• No ice production
• Smaller than usual ice cubes
• Leaking water inside the freezer
• Ice cubes getting stuck in the mold

This OEM LG part is also compatible with some Kenmore models.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

The Clip is an OEM part for LG refrigerators. This clip secures the water tube in place, preventing it from moving or becoming disconnected. It plays a crucial role in maintaining the proper flow of water to the ice maker and water dispenser.

Causes of a bad water tube clip can include physical damage, wear and tear from regular use, or brittleness due to temperature fluctuations. If the clip fails, it can result in leaks or disconnections, disrupting the water supply.

Symptoms of a bad water tube clip include:

• Water leaks inside or outside the refrigerator
• The water tube becoming loose or disconnected
• Reduced or no water flow to the ice maker or water dispenser

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This sensor PCB assembly detects and relays sensor signals to the appliance control system, restoring accurate sensor feedback and communication when the original sensor board fails or malfunctions. Designed as a direct replacement board. What it does:

• Reads sensor inputs and converts them to signals the main control board can interpret.
• Replaces a failed or intermittent sensor board that causes incorrect readings or sensor-related error codes.
• Can resolve symptoms such as unexpected sensor faults, control errors, or appliances not responding to sensor changes.
• Matches the OEM board function; verify model compatibility before ordering.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Use ESD precautions and handle the PCB by its edges to prevent static damage.
• Ensure all connectors are fully seated and the board is mounted in the original orientation.

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

This ice bucket assembly is the removable storage bin that collects and holds cubed ice from the refrigerator ice maker, restoring clean, contained ice storage and proper pickup by the dispenser or scoop. What it does:

• Collects and stores cubed ice produced by the ice maker so ice is contained and ready for use
• Guides ice toward the dispenser/auger area for consistent pickup
• Common symptoms it addresses: cracked or warped bin, ice spilling or falling out, ice not accumulating in the bin
• Fits into the freezer ice maker area and works with the factory guides and ejector mechanism

• Disconnect power to the refrigerator before servicing to avoid injury or damage
• Remove existing bucket by sliding it out of the guides; handle plastic parts gently to avoid cracking
• Reinstall by seating the bucket into the guides until it clicks or seats securely; ice maker components align before restoring power
• After installation, cycle power or run a test ice-making cycle to ensure proper operation