Parts for Lg LFXS28596D/01: Ice Maker / Ice Bin Parts

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.

Water funnel assembly for bottom-mount refrigerators. Directs water flow in the ice and water dispenser system. Replace if cracked or damaged.

Plastic drain tube that channels defrost water from evaporator coils to drain pan. Replace if cracked, melted, broken, or causing water leaks in freezer.

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Control board cover assembly for bottom-mount refrigerators. Protects the PCB housing. Replace if cracked, broken, or missing to secure electronics.

The Freezer Tray is an OEM part for LG refrigerators. It provides an open, flexible surface area within the freezer compartment for storing and organizing frozen foods. The freezer tray's material and rail design also efficiently facilitate airflow to maintain sub-freezing temperatures throughout. 

Symptoms of a faulty freezer tray include:

• Cracks or breaks that compromise structural integrity
• warping or pitting which prevents proper sealing 
• uneven temperatures due to airflow disruption

Causes of a bad freezer tray can include impact damage over time, continuous door openings and closings leading to fatigue, and temperature fluctuations compromising the material.

This OEM LG part is also compatible with Sears/Kenmore refrigerator models.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Supports and guides sliding refrigerator drawers or shelves for smooth rolling. Replace if worn, cracked, or causing wobbling, sticking, or noise.

Dual roller wheel assembly that mounts to the rear wall of the freezer drawer. Replace when wheels are missing, broken, or cracked for smooth sliding.

The Drawer Tray Assembly is an OEM replacement part for LG refrigerators. This is a lower freezer drawer.

Causes of a bad tray assembly can include wear and tear over time, damage from overloading or improper use of the drawer, or issues with its sliding operation mechanism.

Symptoms of a bad tray assembly include:

• The drawer not sliding smoothly or getting stuck
• Difficulty opening or closing the drawer fully
• Noisy operation
• Leaks or ice buildup from a damaged seal

This OEM LG part is also compatible with some Sears/Kenmore model refrigerators.

Replace a cracked, broken, or missing refrigerator shelf. This shelf installs inside your bottom-mount refrigerator to organize and store food items.

Glass shelf assembly with frame for bottom-mount refrigerator fresh food compartment. Replace cracked, broken, or missing shelves to restore storage.

Door bin net shelf for bottom-mount refrigerators. Replaces cracked, broken, or missing net shelf inserts in refrigerator door storage bins.

Replacement shelf net organizer that installs on refrigerator shelves to secure bottles and prevent items from shifting. Needed when original is broken or missing.

Glass shelf for bottom-mount refrigerator fresh food compartment. Replace cracked, chipped, or missing shelves to restore storage space and organization.

Replace a cracked, broken, or missing refrigerator shelf assembly. Restores storage space with a stable surface for food and containers.

This is the glass or plastic cover that sits on top of the crisper drawers in the fresh food compartment, serving as both a shelf and a humidity barrier for the produce drawers below. It typically includes the frame and any attached supports. Replace this cover if it is cracked, broken, or if the crisper drawers are no longer maintaining proper humidity levels for fruits and vegetables.

Glass shelf assembly with frame for bottom-mount refrigerator fresh food compartment. Replace cracked, broken, or missing shelves to restore storage.

Glass shelf assembly with frame for bottom-mount refrigerator fresh food compartment. Replace cracked, broken, or missing shelves to restore storage.

Replacement shelf holder for bottom-mount refrigerators. Secures and supports shelves in place. Needed when original is cracked, broken, or missing.

Fix a sagging or misaligned refrigerator door with this door rail holder. Secures the rail to restore smooth opening and closing. Direct-fit replacement.

Replacement rail holder bracket for bottom-mount refrigerators. Secures drawer rail assemblies for proper alignment. Needed when original is cracked or worn.

Replacement fresh room tray assembly for bottom-mount refrigerators. Restores deli drawer storage when original is cracked, broken, or missing.

Air duct connector for refrigerators. Channels airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Restores clean appearance and helps contain spills in tray area.

This is a decorative front panel that attaches to the deli or fresh food drawer inside the refrigerator. It serves as the visible face of the drawer and provides a handle area for opening and closing it. Replace this cover if it is cracked, warped, discolored, or if the mounting tabs have broken, causing the panel to detach from the drawer.

This is a white decorative cover that conceals the fresh air filter compartment inside the refrigerator. It snaps into place over the air filter housing, providing a clean appearance while allowing airflow through the filter. Replace this cover if it is cracked, broken, or will no longer stay securely attached to the filter housing.

Replaces broken or cracked crisper drawer in bottom-mount refrigerators. Restores organized storage for fruits and vegetables with smooth-sliding design.

Removable crisper drawer for storing and organizing fruits and vegetables in your refrigerator. Replace if cracked, warped, broken, or missing.

Dim or uneven refrigerator lighting? This lamp cover protects and diffuses your interior light. Direct-fit replacement lens, simple installation.

Replaces a cracked, broken, or missing tray cover in your bottom-mount refrigerator. Protects tray surface and prevents spills or contamination.

Replacement rail guide assembly for bottom-mount refrigerator drawers. Install when original guide is cracked, broken, or worn, causing drawer misalignment.

Rail guide assembly for refrigerator drawers and bins. Supports and guides sliding components along tracks. Replace if cracked, broken, or worn.

This freezer door foam assembly replaces the insulating foam inside the freezer door to restore proper thermal barrier and reduce cold-air leaks. It helps the door maintain temperature and prevents excess frost or compressor overwork. What it does:

• Replaces the polyurethane foam layer that insulates the freezer door
• Helps reduce cold-air leakage that can cause frost build-up or uneven temperatures
• Supports more efficient cooling by improving the door's thermal seal
• Can reduce excessive run time caused by lost insulation

• Disconnect power to the appliance before starting any repair.
• Removing the inner door liner/panel is usually required; follow the refrigerator's service manual for panel removal and reassembly.
• Handle the foam carefully to avoid tears or punctures; foam may be bonded with adhesive or held by clips depending on model.

Fix warm fridge temps and frost buildup with this refrigerator door gasket. Creates an airtight seal to keep cool air inside. DIY-friendly install.

Decorative door trim handle for refrigerator doors. Replaces scratched, cracked, or worn trim pieces to restore a finished look and easier grip.

Decorative trim cover that fits over your refrigerator door handle. Replace if cracked, discolored, or missing to restore your handle's appearance.

Covers and protects the refrigerator door hinge assembly. Replace this cap if cracked, missing, or worn to restore a finished appearance and keep hinges clean.

Replacement freezer door handle assembly for bottom-mount refrigerators. Restores secure grip and finished appearance when original handle is cracked, broken, or worn.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Complete home bar door assembly for bottom-mount refrigerators. Replaces cracked, damaged, or broken door-in-door compartment. Includes hinges and frame.

This replacement home bar case is the inner door shelf that holds bottles and small items in the refrigerator door, restoring storage function and a finished interior look. It fits the refrigerator's dedicated home/bar compartment. What it does:

• Provides a secure shelf for bottles, cans, and small containers in the door's home/bar area
• Restores proper spacing and support so items sit level and stay in place
• Replaces cracked, broken, or missing door-shelf housings that cause items to fall or rattle
• Helps maintain the refrigerator's intended interior organization and appearance

• One home bar case (single inner door shelf housing)

• Remove food and items from the door before replacing; handle glass or plastic shelves carefully
• Usually installs with snap-in tabs or a small number of screws—do not force parts; align tabs before pressing
• If your door has wiring or lighting nearby, disconnect power to the refrigerator before working on the door

Replaces worn, cracked, or non-responsive control panel buttons on your refrigerator. Restores tactile feedback and proper panel appearance.

Seals your refrigerator's beverage compartment to maintain cold temperatures and prevent air leaks. Replace if torn, cracked, or loose. Verify fit.

Seals the refrigerator door to prevent cold air leaks, frost buildup, and temperature fluctuations. Replace if torn, cracked, or no longer sealing tightly.

The Refrigerator Flipper Assembly is an OEM part for LG refrigerators. This assists in the smooth opening and closing of the refrigerator door. It ensures an airtight seal when the door is closed, preventing cool air from escaping and maintaining the refrigerator's internal temperature. 

Causes of a malfunctioning Refrigerator Flipper Assembly can range from physical damage, such as cracks or breakage, to wear and tear from regular use.

Symptoms of a bad Refrigerator Flipper Assembly include:

• Difficulty in opening or closing the refrigerator door
• A noticeable gap when the door is supposed to be sealed shut
• Increased energy consumption as the refrigerator works harder to maintain its temperature
• Spoilage of food items quicker than expected due to poor temperature regulation

This OEM LG part is also compatible with some Kenmore models.

Replacement guide rail that supports and aligns refrigerator or freezer drawers. Needed when original rail is bent, cracked, broken, or causing drawers to stick.

This replacement cap cover provides the finished trim and a protective snap-on cover for the appliance component. It restores a clean appearance and helps protect the underlying hardware from dust and debris. What it does

• Covers and protects exposed hardware or openings to prevent dust, lint, and debris buildup
• Restores the appliance's finished appearance after a cracked or missing cover
• Helps keep adjacent parts secure and reduces rattling from loose trim
• Fits as a direct replacement designed to snap into the existing mounting points

• One cap cover

• Turn off power to the appliance before starting disassembly to avoid injury
• Usually installs by snapping into place; remove any trim or panels that obstruct access
• Use gentle, even pressure to avoid cracking the new cover; plastic pry tools can help
• If mounting clips are broken, they may need replacement for a secure fit

Replacement door basket for bottom-mount refrigerators. Restores door storage for bottles, jars, and containers. Needed when original is cracked or broken.

Replacement door bin for bottom-mount refrigerators. Mounts on the inner door panel to organize condiments, beverages, and small items. Needed when cracked or broken.

Molded plastic door basket that mounts on the refrigerator door to hold bottles, jars, and condiments. Replace a cracked, broken, or missing bin.

Clear plastic storage basket that mounts inside your refrigerator door. Holds condiments, spreads, and small items. Replace if cracked, broken, or missing.

Door stopper assembly cushions and limits refrigerator door travel. Replaces cracked, broken, or worn stoppers causing misalignment or door slamming.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Lower hinge assembly supports and pivots your refrigerator door for smooth operation. Replace if door sags, misaligns, or doesn't seal properly. Confirm fit with your model number.

Mounts at the hinge to limit your refrigerator door's opening angle. Replace if cracked, broken, or missing to prevent over-swing and protect the hinge.

Hinge assembly for refrigerator doors. Installs at door pivot point to support door weight and enable smooth opening/closing. Replace if cracked or worn.

Replaces worn, cracked, or damaged refrigerator door handle assembly. Restores secure grip and smooth door operation when original handle is broken or loose.

Replacement handle for refrigerator doors. Installs on the exterior door panel. Replace if your handle is cracked, broken, loose, or missing.

Fix unresponsive or stuck control panel buttons on your bottom-mount refrigerator. This button assembly restores tactile control for temperature and settings.

Plastic rail holder that secures shelf rails inside your refrigerator. Replace this holder if it's cracked, broken, or missing to restore proper shelf support.

This slide rail is a replacement drawer guide that restores smooth, stable drawer movement and helps prevent binding or sagging. Designed to match the OEM fit so drawers open and close reliably. What it does:

• Guides and supports the appliance drawer for smooth sliding motion
• Replaces worn or damaged rails that cause sticking, sticking intermittently, or uneven travel
• Helps prevent drawer tilt or sag when loaded
• Restores proper alignment for secure closing

• Disconnect power to the appliance before beginning any work
• Remove the drawer per your model's service instructions to access the rail
• Use basic hand tools (screwdriver/driver) to remove and replace the rail; keep fasteners for reuse
• Align the rail carefully, slide the drawer to test operation, and verify smooth movement before returning the appliance to service

Supports and guides refrigerator drawers for smooth gliding. Replace when worn, broken, or causing binding. Confirm fit with your model number.

This harness assembly restores the electrical connections between components, replacing a damaged or worn wiring harness to help re-establish reliable power and signal paths for the appliance. What it does

• Replaces a damaged or frayed wire harness that can cause intermittent or no power to components
• Restores factory wiring routes and connector fit to ensure correct electrical signaling
• Prevents shorts or open circuits caused by broken wires or loose terminals
• Helps resolve symptoms like components not powering, erratic operation, or connector damage

• One harness assembly as shown

• Disconnect power and any water supply before starting; confirm appliance is fully de-energized
• Compare connectors and wire lengths to the original part before installation
• Route harness along factory clips and secure fasteners to prevent pinching or chafing

Replace a worn or broken freezer drawer bar connector assembly to restore smooth gliding and proper alignment. Confirm fit with your model number.

This center hinge assembly replaces the middle door hinge on compatible French-door refrigerators to restore proper door alignment and smooth opening. It helps prevent sagging, binding, and air leaks caused by a worn or damaged hinge. What it does:

• Supports and aligns the upper/lower refrigerator doors for correct sealing
• Enables smooth pivoting of the door to open and close without binding
• Corrects uneven gaps or door sag that can cause cooling loss or excessive wear
• Replaces a bent, cracked, or worn hinge that may cause noisy operation

• One center hinge assembly

• Remove power and empty the door(s) before beginning work; follow manufacturer service instructions
• Use proper tools and support the door while removing/installing the hinge to avoid injury or damage
• Inspect surrounding trim and fasteners; replace any worn screws or bushings as needed

Fix sagging or misaligned refrigerator doors with this center hinge assembly. Restores proper door pivot support and eliminates uneven gaps or binding.

Replacement ring for your refrigerator. Installs on internal components to secure or seal parts. Order a new ring if yours is cracked or missing.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Secures and aligns your refrigerator door at the top hinge point. Replace if door sags, binds, or seals unevenly. Confirm fit with your model number.

Secures and pivots your refrigerator door at the top for proper alignment and smooth operation. Replace if door sags or seals poorly. Verify fit.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Replaces damaged duct vent cap assembly on your refrigerator. Install when cap is cracked, broken, or missing to restore proper airflow. Verify fit with your model number before ordering.

Lever spring for bottom-mount refrigerators. Provides tension for internal lever mechanisms. Replace if broken, stretched, or missing to restore proper fit.

If your refrigerator lever won't return to position or feels loose, this lever return spring restores proper tension for smooth operation. Direct-fit part.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Fix a non-responsive or broken dispenser button with this push-style lever. Restores tactile feedback and control input. Simple snap-in replacement.

Internal bracket assembly that mounts and secures the door handle to your refrigerator door. Replace if the bracket is cracked, broken, or stripped threads.

Magnetic gasket strip that ensures your refrigerator door closes securely and maintains an airtight seal. Replace when door won't stay closed or seal feels weak. Confirm fit with your model number.

Rubber cap for bottom-mount refrigerators. Installs on various internal components. Replace if cracked, worn, missing, or damaged to restore appearance.

Refrigerator not cooling or running constantly? The compressor circulates refrigerant to maintain proper temperature. This repair requires expertise.

Fix a refrigerator not cooling or freezing over with a new evaporator coil assembly. This part circulates refrigerant to cool your fridge compartments.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

This motor support damper sits between the refrigerator's compressor and base to absorb vibration and movement. Replacing a worn damper helps quiet rattles and humming from the back of the cabinet and keeps the compressor properly supported.

• Cushions the compressor to reduce transmitted vibration and noise
• Helps quiet humming, buzzing, or rattling from the lower rear of the refrigerator
• Maintains proper compressor alignment and support on the base pan
• Common signs of wear: increased vibration/noise, a cracked or flattened damper, or noticeable compressor movement when running

• Unplug the refrigerator and pull it forward to access the rear; allow the compressor to cool before working
• Support the compressor to remove load from the mount before loosening hardware
• Replace the damper and tighten mounting hardware evenly without over-compressing the rubber
• Avoid bending or stressing refrigerant tubing; wear gloves and eye protection

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

Drain tray assembly that collects condensation beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage issues.

Replaces a cracked, scratched, or damaged front panel on your bottom-mount refrigerator. Restores appearance and protects internal components.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Front cover panel for your refrigerator door. Snaps into place to restore appearance and protect controls. Replace if cracked, broken, or missing clips.

Rear machinery compartment cover assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing covers that protect compressor components.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This restrainer is a small retaining clip that helps secure moving or removable components in place, reducing rattles and keeping parts aligned for reliable operation. It's a simple replacement for worn or broken clips. What it does:

• Holds a cover, panel, or door-related component in proper position to prevent shifting
• Reduces noise caused by loose or vibrating parts
• Restores original fit where a broken or missing clip allows movement
• Simple mechanical function — no electrical connections or calibration

• One restrainer

• Disconnect power (and water if applicable) before beginning repairs
• Inspect surrounding mounting points for damage; replace any broken tabs or fasteners
• Typically installs with basic hand tools; align clip and press or snap into place until secure

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This condenser assembly connects and secures the refrigerator condenser components, helping the cooling system run reliably. It replaces damaged or corroded condenser wiring to restore proper condenser function and airflow. What it does:

• Provides the OEM-configured wiring and mounting for the condenser to ensure consistent electrical connection.
• Restores proper condenser operation when original wires are cut, burnt, corroded, or loose.
• Helps prevent intermittent cooling or compressor issues caused by faulty condenser connections.
• Maintains correct routing and strain relief for condenser lines to reduce wear and chafing.

• One condenser assembly with attached wiring and mounting hardware as shown.

• Recommended for technicians or confident DIYers; disconnect power before starting and unplug the appliance.
• Inspect surrounding components for damage; replace any compromised parts.
• Use proper tools and tighten mounting hardware to OEM torque where specified; avoid pinching wires.

Fix uneven cooling or warm spots in your refrigerator with a new evaporator fan blade. This part circulates cold air throughout the unit for consistent temps.

Fix a warm fridge or squealing fan noise with a new condenser fan blade. Circulates air over condenser coils. DIY repair takes about 30 minutes.

Fixing loud fan noise or poor cooling? This fan grille assembly protects the fan and directs airflow properly. Replaces cracked or broken grilles.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

This DC motor drives the evaporator fan that circulates cold air from the evaporator coils throughout the refrigerator and freezer compartments. It is essential for maintaining even, consistent temperatures inside the unit. Replace this motor if the refrigerator is not cooling properly, the freezer is cold but the fresh food section is warm, or you hear unusual buzzing or grinding noises coming from behind the interior back panel.

A replacement cover motor that powers the refrigerator's dispenser cover, allowing the door to open and close so you can access ice and water. Replaces a worn or failed motor to restore normal dispenser cover operation. What it does:

• Drives the dispenser cover mechanism so the cover opens when dispensing and closes when idle
• Helps keep the dispenser sealed to reduce drafts and prevent pests or debris from entering
• Stops or fails to move when worn, causing a stuck, slow, or noisy dispenser cover
• Works with the dispenser linkage and gears to coordinate cover motion with user controls

What's included:

• One cover motor

Install notes:

• Disconnect power to the appliance before beginning any repair
• Remove dispenser trim and access panel per your model's service instructions to reach the motor
• Handle gears and linkage carefully; ensure proper alignment during reassembly and test cover operation before finishing

Uneven cooling or noisy damper? This damper motor support bracket secures the air control assembly for proper airflow between compartments. DIY fix.

Refrigerator not cooling properly? This damper motor support secures the air damper assembly that controls airflow between compartments. Simple DIY fix.

The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freezer. 

Symptoms of a bad Ice Dispenser Door Motor include:

• The dispenser door not opening or closing properly,
• Ice not being dispensed when activated,
• Unusual noises coming from the dispenser mechanism.

Causes of ice dispenser door motor failure can include electrical issues such as shorts or wiring problems, mechanical wear over time, or blockages that strain the motor.

This OEM LG part is also compatible with Sears/Kenmore.

Secures your refrigerator door at the correct position to prevent over-rotation and hinge damage. Replace if door swings too far or won't stay open.

Fix ice buildup in your refrigerator with this defrost heater. Melts frost from the evaporator during defrost cycles to restore consistent cooling.

LED light assembly for refrigerator interior lighting. Installs in fresh food or freezer compartment. Replace if cracked, dim, or not illuminating properly.

Fix a dim or flickering refrigerator interior with this LED light assembly. Direct replacement part restores bright, even lighting in minutes.

Refrigerator not cooling evenly or running constantly? This DC motor assembly drives the fan to restore proper airflow and temperature control in your fridge.

Fixes refrigerator that won't start or responds intermittently. This main power control board assembly manages electronic functions and power distribution.

Protective cover assembly that shields the printed circuit board (PCB) in your refrigerator. Replace if cracked, broken, or missing to protect electronics.

Display cover assembly for bottom-mount refrigerators. Protects and frames the control panel display. Replace if cracked, discolored, or damaged.

Ice maker overflowing or not stopping? This shut-off arm lever controls ice production by sensing bin levels. Simple plug-and-play repair.

Ice maker stopped dropping ice or has a cracked tray causing leaks? This complete ice maker assembly restores ice production in your refrigerator.

Ice maker stopped producing ice or cycles too slowly? This complete ice maker assembly replaces a faulty unit. DIY-friendly installation in 10-15 minutes.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

The Temperature Sensor is an OEM part for LG refrigerators. Also known as a thermistor, is responsible for sensing the temperature changes and providing the necessary feedback to the refrigerator's control board. It helps maintain accurate and consistent temperature levels, ensuring optimal food preservation and efficient cooling.

Causes of a faulty temperature sensor can include wear and tear over time, damage due to electrical issues or exposure to extreme temperatures, or sensor calibration issues. These factors can result in temperature inconsistencies, inaccurate readings, or improper cooling performance of the refrigerator.

Symptoms of a bad temperature sensor may include:

• Incorrect temperature readings on the control panel
• Temperature fluctuations inside the refrigerator
• Overcooling or inadequate cooling of food items

This OEM LG part can also be used on Kenmore/Sears appliances. 

Ice bucket assembly collects and stores ice from your refrigerator's ice maker. Replace if cracked, broken, or not dispensing ice properly. Confirm fit with your model number.

Fix a dispenser that won't activate or feels stuck with this refrigerator dispenser lever. Direct replacement part for bottom-mount models. Easy repair.

Rubber cap for bottom-mount refrigerators. Covers and protects screws, bolts, or openings. Replace if cracked, missing, or worn to restore appearance.

Fix ice not dispensing or slow ice flow with this complete ice dispenser assembly. Includes ejection chute, auger motor, and electrical components.

Stores and supplies water to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged from mineral buildup or freezing.

Replaces cracked or leaking water line connector tubes in refrigerators. Restores proper water flow between components. Confirm fit with your model number.

Secures and routes the water tube along the cabinet or door. Replace if cracked, broken, or missing to prevent kinks and keep tubing properly positioned.

Fix ice maker not filling or water dispenser not working with this refrigerator water inlet valve assembly. Solves leaks and no-water issues. DIY repair.

Fix no water or ice issues with this water inlet valve. Common when ice maker won't fill or dispenser trickles. Easy 10-minute DIY with video guide.

Leaking water from your refrigerator or no water/ice from dispenser? This water inlet valve controls flow to ice maker and dispenser. DIY repair in 30 min.

Plastic cover cap for bottom-mount refrigerators. Snaps over mounting screws or fasteners to conceal hardware. Replace if cracked, broken, or missing.

Secures bracket assemblies inside your refrigerator to keep components aligned and reduce vibration. Replace if cracked, bent, or missing.

This is a replacement filter cover that secures the air filter in place and protects internal components. It restores the proper fitment of the filter and helps maintain intended airflow and filtration performance. What it does:

• Holds the air filter securely so air passes through the filter media as designed
• Protects internal components from dust and debris
• Prevents gaps that can reduce filtration efficiency or allow unfiltered air bypass
• Helps reduce rattling or vibration caused by a loose or damaged cover

• One filter cover

• Disconnect power before accessing internal parts
• Remove the old cover by releasing retaining tabs or fasteners and align new cover until it snaps or locks into place
• Inspect nearby seals and the filter; replace if damaged
• Handle plastic parts gently to avoid cracking; do not force into place

Replace a broken or leaking water filter housing that prevents water flow to your dispenser and ice maker. Direct fit for bottom-mount refrigerators.

Removes impurities and contaminants for clean, fresh-tasting water and ice. Replace every 6 months or when water flow decreases. Verify fit with your model.

Secures and protects your refrigerator's air filter, maintaining proper airflow and filtration. Replace if cracked or loose. Verify fit with your model.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Home bar cover panel for bottom-mount refrigerators. Replaces cracked, broken, or missing exterior home bar covers. Restores appearance and finish.